WPA2 Capture Handshake - Only once?

[wolf17]

Hey guys,

I know this topic is discussed all the time - i've gone through many of the old threads but cant seem to come to a conclusion.

Im running airodump and then aireplay but cant seem to get handshake. Aireplay does send the DeAuth properly.

My first attempt to do the whole WPA2 crack I did it successfully. I captured the handshake and then cracked it - all following xploitx's tutorial. Ever since though I cant seem to get another handshake. What could have gone wrong?

I heard range can effect it - i have tried moving a round a bit, no real success(I can pick up internet from where I sit normally so it should work).

airodump has been running for about 7 minutes so far - hasnt picked up any client connections either...hmm?

Oh and yes - this is my own private network I am testing it on. Running BT3 on a dell 600m. Network is WPA2.

What could it be?

Thanks in advance

[wolf17]

Gosh and then right when I post this I get a handshake!

All i did was airmon-ng stop eth1, airmon-ng start eth1. Could that really have been the reason why it worked or just dumb luck?

Also -fair warning this will prob be a noobish question- if I can capture the handshake does that mean my card has injection capabilities? I have ran aireplay-ng -9 eth1 but it does not say anything about injection.

[Gitsnik]

Great that you caught it on your own, it's probably just dumb luck though - waaaay back when I had no working injection I used to have to wait up to twelve hours for one, thankfully the payment for those tests bought me a card with injection.

Pro tip: paste your aireplay-ng -9 eth1 output so we can tell you more accurately.

In the meantime:

# aireplay-ng -9 ath0
16:02:10  Trying broadcast probe requests...
16:02:10  Injection is working!
16:02:12  Found 1 AP
...
16:02:14  30/30: 100%

[Handsome-geek]

If you test on your network just disable enable radio on associated client and you will capture handshake.

You lack of some basic things in aircrack-ng tools so first read things and theory behind it.

[wolf17]

Thanks for your replies. I managed to capture handshake a few more times - but it very unpredictable and often I get no luck whatsoever.

My aireplay-ng -9 eth1 results in

Trying to broadcast probe requests
No Answer...
Found 2 Ap's

Trying directed probe requests ...and then gets 0/30 0% on each. Looks like that means I dont have injection. You say ill have more luck with a better card?

[junkiethumbs]

Just to prove that I can be nice... Check here for a new card.

Wireless Cards STICKIED at the top of this NEWBIE section.
^^^^.............................................. .................^^^^
found in no time searching

If you test on your network just disable enable radio on associated client and you will capture handshake.

You lack of some basic things in aircrack-ng tools so first read things and theory behind it.

Also, I think hg here has a good point. you are lacking a basic understanding of the tools, and the protocols. Injection is not necessary for WPA handshakes.
^^^^......................^^^^
found in under a minute searching


Another thing to make sure is that you used the command

airmon-ng start device

JT

Edited out my poor choice of words. Gitsnik is correct. It helps speed up WPA, but it is not necessary. I put does not help. n00bish of me.

[Gitsnik]

Injection is for WEP. It does not help for WPA handshakes.

If you feel like hanging around with no ability to deauth, be my guest. I, on the other hand, will enjoy my injection capabilities that net me my handshake from active clients on a network.