I think this belongs in the how to section.
Thought I would share my experience in getting BT4 Pre-final working on a Asus EEE PC 1005HA (this is the new Seashell model). Out of the box Audio, Video, USB all function correctly, however Wireless/Ethernet are a no go. I haven't tested Bluetooth; but I'll add to this post if I come across any issues. For now I'll cover Wireless/Ethernet and a GRUB mod, then add to this post as necessary as I come across something.
To start, I've performed a full install of BT4 according the multitude of guides around.
The 1005HA uses the following Atheros Chipsets:
AR9285 for Wireless
AR8132 for Ethernet
Step 1: AR8132 Ethernet Chipset Driver
Download the following Driver from Atheros (AR813X-linux-v126.96.36.199.tar.gz) on another box and transfer to the EEE:
Untar, make, make install, then:
ifconfig eth0 up
Yay Ethernet works, now you can grab the Wireless driver.
Step 2: AR9285 Wireless Chipset
Download the Linux Wireless driver:
And follow the instructions for make, install, make unload as directed on:
Then reboot. Wireless should be up and happy... although I haven't tested injection yet (I will tonight and report back).
SUPER EXTRA BONUS: GRUB Boot Options
Since the EEE PC has a lower resolution than the default BT4 kernel parameters you have to make one change in order avoid the annoying "Hit enter to select VGA or press Space to continue" (or something along those lines) message when booting.
Scroll down and modify the default kernel boot option (scroll right) from:
Save and then reboot.
Enjoy your new EEE!
But how did you installed the atheros Ethernet driver if there's no acces to Internet to be downloaded to it can you please explain because I have the same problem everything works but wireless card needs the driver
Pretty easy, you've gotta have another computer OR go into your winXP OS, download the Ethernet driver and THEN go into your BT OS and install the driver! after that.. you just connect your eeepc with the ethernet cable and take the wireless driver and install them as it's written! (in fact I just reworded what he said first) ^^
Could someone please report if the packet injection is working? or do we need the madwifi driver?
Well I replyed but the site doesn't show it so just in case:
You get the eternet driver before installing BT4 (on another computer, or on winxp) or .. just on winxp if you dualboot! You save it on a usb key / SD card and than you install it on BT4, once it's installed, you can take the wireless driver and there you go!
By the way: can anyone report if packet injection work? Or do we need madwifi?
Im thinking of purchasing the asus 1005HA. Can anyone confirm if the wifi card is suitable for running backtrack 4? (e.g. packet injection)
Dum spiro spero
I have the same laptop...
I got wireless working without an issue by following the video and just simply entering
then simply going to the wireless manager and put in the WEP key we use.... the Pre-Final worked fine with the wireless card.
I just read your post though on wired and am about to try it... so far I haven't gotten it to work yet.
Thanks that worked a tread for wired and wireless.
Does power management work on these, I closed the lid while BT4 was running and rather than suspending it just overheated!
I was able to get the ethernet working by installing the drivers from atheros... The wifi drivers worked by default by running wicd.
I have not been able to do any packet injection with the wireless card and default drivers though...
I attempted to install the latest wireless drivers as described above but it did not work. When I tried to load the modules it gave errors about missing some symbols...