Intel 5100 injection problem

[keeley]

Hi, I have bt4 prefinal

I try injection test on my Intel 5100

I set wlan0 on mode monitor then airmon-ng start wlan0 > mon0
I use alfa (rtl8187) for test > mon1

Injection with intel 5100 in mode -2 -3 -4 -6 -5 -7 failed

aireplay-ng -9 mon0 -i mon1
For information, no action required: Using gettimeofday() instead of /dev/rtc

20:40:00  Trying broadcast probe requests...
20:40:00  Injection is working!
20:40:01  Found 1 AP

20:40:01  Trying directed probe requests...
20:40:01  00:18:39:AA:79:56 - channel: 11 - 'K world'
20:40:02  Ping (min/avg/max): 1.360ms/37.143ms/40.855ms Power: 223.23
20:40:02  30/30: 100%


20:40:02  Trying card-to-card injection...
20:40:03  Attack -0:           OK
20:40:03  Attack -1 (open):    OK
20:40:03  Attack -1 (psk):     OK
20:40:07  Attack -2/-3/-4/-6:  Failed
20:40:11  Attack -5/-7:        Failed

with alfa all right

aireplay-ng -9 mon1 -i mon0
For information, no action required: Using gettimeofday() instead of /dev/rtc

20:39:42  Trying broadcast probe requests...
20:39:42  Injection is working!
20:39:44  Found 1 AP

20:39:44  Trying directed probe requests...
20:39:44  00:18:39:AA:79:56 - channel: 11 - 'K world'
20:39:46  Ping (min/avg/max): 1.081ms/83.327ms/106.955ms Power: 233.87
20:39:46  30/30: 100%


20:39:46  Trying card-to-card injection...
20:39:46  Attack -0:           OK
20:39:46  Attack -1 (open):    OK
20:39:46  Attack -1 (psk):     OK
20:39:46  Attack -2/-3/-4/-6:  OK
20:39:46  Attack -5/-7:        OK

Where is the problema? I need pacht driver of intel 5100??

[sκy_walκer]

Hi, I have bt4 prefinal

I try injection test on my Intel 5100

I set wlan0 on mode monitor then airmon-ng start wlan0 > mon0
I use alfa (rtl8187) for test > mon1

Injection with intel 5100 in mode -2 -3 -4 -6 -5 -7 failed

aireplay-ng -9 mon0 -i mon1
For information, no action required: Using gettimeofday() instead of /dev/rtc

20:40:00  Trying broadcast probe requests...
20:40:00  Injection is working!
20:40:01  Found 1 AP

20:40:01  Trying directed probe requests...
20:40:01  00:18:39:AA:79:56 - channel: 11 - 'K world'
20:40:02  Ping (min/avg/max): 1.360ms/37.143ms/40.855ms Power: 223.23
20:40:02  30/30: 100%


20:40:02  Trying card-to-card injection...
20:40:03  Attack -0:           OK
20:40:03  Attack -1 (open):    OK
20:40:03  Attack -1 (psk):     OK
20:40:07  Attack -2/-3/-4/-6:  Failed
20:40:11  Attack -5/-7:        Failed

with alfa all right

aireplay-ng -9 mon1 -i mon0
For information, no action required: Using gettimeofday() instead of /dev/rtc

20:39:42  Trying broadcast probe requests...
20:39:42  Injection is working!
20:39:44  Found 1 AP

20:39:44  Trying directed probe requests...
20:39:44  00:18:39:AA:79:56 - channel: 11 - 'K world'
20:39:46  Ping (min/avg/max): 1.081ms/83.327ms/106.955ms Power: 233.87
20:39:46  30/30: 100%


20:39:46  Trying card-to-card injection...
20:39:46  Attack -0:           OK
20:39:46  Attack -1 (open):    OK
20:39:46  Attack -1 (psk):     OK
20:39:46  Attack -2/-3/-4/-6:  OK
20:39:46  Attack -5/-7:        OK

Where is the problema? I need pacht driver of intel 5100??

you have to wait for new kernel or for BT5 anyway, patch doesn't exist at the moment...
btw. could you paste more info about your usb adapter please ? I'm going to buy one with the same chipset thx

[keeley]

you have to wait for new kernel or for BT5 anyway, patch doesn't exist at the moment...
btw. could you paste more info about your usb adapter please ? I'm going to buy one with the same chipset thx

my usb card is alfa awus036h (rtl8187 500mwatt out )

[lordplagueis]

[QUOTE=keeley;138936]Hi, I have bt4 prefinal

I try injection test on my Intel 5100

I set wlan0 on mode monitor then airmon-ng start wlan0 > mon0
I use alfa (rtl8187) for test > mon1

Injection with intel 5100 in mode -2 -3 -4 -6 -5 -7 failed

aireplay-ng -9 mon0 -i mon1
For information, no action required: Using gettimeofday() instead of /dev/rtc

20:40:00  Trying broadcast probe requests...
20:40:00  Injection is working!
20:40:01  Found 1 AP

20:40:01  Trying directed probe requests...
20:40:01  00:18:39:AA:79:56 - channel: 11 - 'K world'
20:40:02  Ping (min/avg/max): 1.360ms/37.143ms/40.855ms Power: 223.23
20:40:02  30/30: 100%


20:40:02  Trying card-to-card injection...
20:40:03  Attack -0:           OK
20:40:03  Attack -1 (open):    OK
20:40:03  Attack -1 (psk):     OK
20:40:07  Attack -2/-3/-4/-6:  Failed
20:40:11  Attack -5/-7:        Failed

with alfa all right

aireplay-ng -9 mon1 -i mon0
For information, no action required: Using gettimeofday() instead of /dev/rtc

20:39:42  Trying broadcast probe requests...
20:39:42  Injection is working!
20:39:44  Found 1 AP

20:39:44  Trying directed probe requests...
20:39:44  00:18:39:AA:79:56 - channel: 11 - 'K world'
20:39:46  Ping (min/avg/max): 1.081ms/83.327ms/106.955ms Power: 233.87
20:39:46  30/30: 100%


20:39:46  Trying card-to-card injection...
20:39:46  Attack -0:           OK
20:39:46  Attack -1 (open):    OK
20:39:46  Attack -1 (psk):     OK
20:39:46  Attack -2/-3/-4/-6:  OK
20:39:46  Attack -5/-7:        OK

Where is the problema? I need pacht driver of intel 5100??
type #aireplay-ng -9 -e <wireless network name> -a <ap mac address> mon0 or mon1

[teh1337one]

misread the issue

[yanviau]

any1 find how to enabled injection on intel 5100 ?

[RageLtMan]

5100 seems to be a fickle animal - injection on mine will work for 2 minutes then cease, and not work again until a reboot or two later. makes no sense. i've been trying to find a thread where someone used an alternate driver for it and claimed success, but cant seem to raise the bloody thing. will post back if i find it and it works

[teh1337one]

has anyone found a working way to get packet injection working with the intel 5100 yet?

[_DoS_]

intel 5100 BT4 recognises the card and if you start it with airmon-ng and check it with aireplay-ng -9 command it shows that the card is injecting. But this isnt very true (yes the card is injecting but only to a certian point then it stops,and only can go in monitor mode and listens to data but not injecting).. Every time i do a auth -1 with aireplay-ng on the AP the card stops injecting. After a lot of reading i finely got it workig and it is a simple solution.

by Hallucynogenyc

http :// www .aircrack-ng. org / doku. php ? id = iwlagn

jump to the compat wireless section (when choosing the version on the compat wireless webpage, select the first one (there's 30, 32 and 35 or similar, so the 30), I don't know if others work too but this one works for me 100%.

it only works with "wlan0" and a really important thing about these intel cards is the distance... the distance really does affects the injection. Try to get the strongest signal befor injecting.

Commands to run :
First run BT4 from your Usb, HDD or whatever and put the .tar file in your home directory then open a console and :

cd ~
tar xjf compat-wireless-2.6.tar.bz2 (asuming you have downloaded comapt-wireless form the link provided)
cd compat-wireless-2009*
make -j4
make unload (root)
make install (root)
echo options iwlagn swcrypto=1 >> /etc/modprobe.d/options (root)
make load (root)

You are set to go.

[Falcophis]

intel 5100 BT4 recognises the card and if you start it with airmon-ng and check it with aireplay-ng -9 command it shows that the card is injecting. But this isnt very true (yes the card is injecting but only to a certian point then it stops,and only can go in monitor mode and listens to data but not injecting).. Every time i do a auth -1 with aireplay-ng on the AP the card stops injecting. After a lot of reading i finely got it workig and it is a simple solution.

by Hallucynogenyc

http :// www .aircrack-ng. org / doku. php ? id = iwlagn

jump to the compat wireless section (when choosing the version on the compat wireless webpage, select the first one (there's 30, 32 and 35 or similar, so the 30), I don't know if others work too but this one works for me 100%.

it only works with "wlan0" and a really important thing about these intel cards is the distance... the distance really does affects the injection. Try to get the strongest signal befor injecting.

Commands to run :
First run BT4 from your Usb, HDD or whatever and put the .tar file in your home directory then open a console and :

cd ~
tar xjf compat-wireless-2.6.tar.bz2 (asuming you have downloaded comapt-wireless form the link provided)
cd compat-wireless-2009*
make -j4
make unload (root)
make install (root)
exho options iwlagn swcrypto=1 >> /etc/modprobe.d/options (root)
make load (root)

You are set to go.

Thanks voor the info. It helped me a great deal. damn intel cards.
i just can't make any sense of the
--exho options iwlagn swcrypto=1 \\ etc/modprobe.d/options--
i didn't use it but it worked even without that line
why do you have to use it and what does it mean...
And thanks again for the info and the work...