Sir.....
I have Vodafone ZTE 2525 USB Modem. I would like to use it in backtrack. How do i founnd details for it .
Dual Mode USB Modem (Storage and Modem) Like ZTE AC2726, ZTE AC2710, and other.
Usb modem in this new era sometimes come with dual mode. as a storage media and modem. In BT 4 beta this function make BT4 beta unable to read the modem. This Usb modem Like Globe Trotter, ZTE AC Series, Hyundai Mobile MB-810 and the other.
BT4 beta doesn't seems detect any modemand just Storage media, so what you need is Download usb_modeswitch.
Sorry i can't post any url yet. Just use google.
It's should show progres like this.Code:wget ****************************usb_modeswitch-1.0.2.tar.bz2 tar -xjf usb_modeswitch-1.0.2.tar.bz2 cd usb_modeswitch-1.0.2 sudo make install
The next step, you need to open usb_modeswitch.conf and edit it. This case i'm using ZTE AC2726. First Open usb_modeswitch.conf the way you like. i'm using kate for it. Search for your modem name, And remove the ';' on the front of any code on your modem section. What ? ZTE AC2726 doesn't there. no problem. i Just looking for usb modem that nearly same to ac2726. i found ZTE AC2710. i Just copy the note and paste it on the bottom of usb_modeswitch.conf. Then i change the name and Product id ffff to fff1. because my ZTE AC2627 product id fff1. It's like this.Code:mkdir -p /usr/sbin install ./usb_modeswitch /usr/sbin mkdir -p /etc install ./usb_modeswitch.conf /etc
Next step we need to detect what is you product id. (vendor and product number)Code:######################################################## # ZTE AC2726 (EVDO) # # Contributor: Wasim Baig DefaultVendor= 0x19d2 DefaultProduct= 0xfff5 TargetVendor= 0x19d2 TargetProduct= 0xfff1 MessageContent="5553424312345678c00000008000069f010000000000000000000000000000"
Just type
thenCode:modprobe usbserial vendor=<YourTargetVendID> product=<YourTargetProdID>
now check lsusb and dmesg.Code:usb_modeswitch
in lsusb it's should show something about your product id.
and in dmesg it's show something like /dev/ttyUSB0 or /dev/ttyAMC0.
Next step do your job with wvdial or gnome-ppp or kppp or what program that you like. i choose wvdial.
Hope this is use full.
Search How to Wvdial or gnome ppp or kppp on other thread, this thread just for how to detect dual mode usb modem.
However if someone really need help, Contact me. Or replay this thread, i'll look what i can do to help.
Sorry for bad English.
Regards
JoeleZ
K2525 Details
Sir.....
I have Vodafone ZTE 2525 USB Modem. I would like to use it in backtrack. How do i founnd details for it .
I use google for looking the ZTE 2525 USB Modem.
But i find nothing. Are you sure that is the right usb modem product name ?
May be it's not ZTE 2525.
On the other hand, you can use dmesg to look what your product and vendor id. Or use the lsusb if it's already detected but not instaled yet. The output will show like blank after "vendorID":"productID" number or detected for unknown usbserial or new usb high speed bla bla bla. you can check it with unplug then lsusb, look whats in there, then plug it again and then lsusb again. Look whats new. There's your vendor and product ID. Done.
There is another method, and really really Stupid One >.<
Using wi**ow* OS and look for product and vendor ID there.
Sorry, maybe this doesn't answer your question.
Regards,
JoeleZ
Sir ....i plugged that USB Stick in Backtrack done lsusb found this
ONDA Communication S.P.A
Vendor Id 0x19d2
Product id 0x0022
See if it helps.
Thanking You.
I want to connect my Vodafone USB Modem with my Backtrack 4
if you could help
lsusb output is
Bus 002 Device 009: ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB Modem
sb 2-3: new full speed USB device using ohci_hcd and address 4
usb 2-3: configuration #1 chosen from 1 choice
usb-storage: probe of 2-3:1.0 failed with error -1
usb 2-3: USB disconnect, address 4
usb 2-3: new full speed USB device using ohci_hcd and address 5
usb 2-3: configuration #1 chosen from 1 choice
usb-storage: probe of 2-3:1.0 failed with error -5
option 2-3:1.0: GSM modem (1-port) converter detected
usb 2-3: GSM modem (1-port) converter now attached to ttyUSB0
usb-storage: probe of 2-3:1.1 failed with error -5
option 2-3:1.1: GSM modem (1-port) converter detected
usb 2-3: GSM modem (1-port) converter now attached to ttyUSB1
usb-storage: probe of 2-3:1.2 failed with error -5
option 2-3:1.2: GSM modem (1-port) converter detected
usb 2-3: GSM modem (1-port) converter now attached to ttyUSB2
usb-storage: probe of 2-3:1.3 failed with error -1
usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd huaweiAktBbo rqt 128 rq 6 len 32 ret
-110
usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd huaweiAktBbo rqt 128 rq 6 len 32 ret
-110
usb 2-3: USB disconnect, address 5
option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
option 2-3:1.0: device disconnected
option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
option 2-3:1.1: device disconnected
option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
option 2-3:1.2: device disconnected
usb 2-3: new full speed USB device using ohci_hcd and address 6
usb 2-3: configuration #1 chosen from 1 choice
usb-storage: probe of 2-3:1.0 failed with error -1
usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd huaweiAktBbo rqt 128 rq 6 len 18 ret
-62
usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd huaweiAktBbo rqt 128 rq 6 len 9 ret
-62
usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd huaweiAktBbo rqt 128 rq 6 len 32 ret
-62
usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd huaweiAktBbo rqt 0 rq 3 len 0 ret -6
2
usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd huaweiAktBbo rqt 128 rq 6 len 18 ret
-62
usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd huaweiAktBbo rqt 128 rq 6 len 18 ret
-62
usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd huaweiAktBbo rqt 128 rq 6 len 9 ret
-62
usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd huaweiAktBbo rqt 128 rq 6 len 18 ret
-62
usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd huaweiAktBbo rqt 128 rq 6 len 32 ret
-62
usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd huaweiAktBbo rqt 128 rq 6 len 9 ret
-62
usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd huaweiAktBbo rqt 128 rq 6 len 18 ret
-62
usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd huaweiAktBbo rqt 128 rq 6 len 9 ret
-62
usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd huaweiAktBbo rqt 128 rq 6 len 32 ret
-62
usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd huaweiAktBbo rqt 0 rq 3 len 0 ret -6
2
usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd huaweiAktBbo rqt 128 rq 6 len 32 ret
-62
usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd huaweiAktBbo rqt 128 rq 6 len 9 ret
-62
usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd huaweiAktBbo rqt 0 rq 3 len 0 ret -6
2
usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd huaweiAktBbo rqt 0 rq 3 len 0 ret -6
2
usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd huaweiAktBbo rqt 128 rq 6 len 32 ret
-62
usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd huaweiAktBbo rqt 0 rq 3 len 0 ret -6
2
usb 2-3: USB disconnect, address 6
usb 2-3: new full speed USB device using ohci_hcd and address 7
usb 2-3: configuration #1 chosen from 1 choice
usb-storage: probe of 2-3:1.0 failed with error -5
option 2-3:1.0: GSM modem (1-port) converter detected
usb 2-3: GSM modem (1-port) converter now attached to ttyUSB0
usb-storage: probe of 2-3:1.1 failed with error -5
option 2-3:1.1: GSM modem (1-port) converter detected
usb 2-3: GSM modem (1-port) converter now attached to ttyUSB1
usb-storage: probe of 2-3:1.2 failed with error -5
option 2-3:1.2: GSM modem (1-port) converter detected
usb 2-3: GSM modem (1-port) converter now attached to ttyUSB2
usb-storage: probe of 2-3:1.3 failed with error -1
usb 2-3: USB disconnect, address 7
option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
option 2-3:1.0: device disconnected
option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
option 2-3:1.1: device disconnected
option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
option 2-3:1.2: device disconnected
usb 2-2: new full speed USB device using ohci_hcd and address 8
usb 2-2: configuration #1 chosen from 1 choice
usb-storage: probe of 2-2:1.0 failed with error -1
usb 2-2: USB disconnect, address 8
usb 2-2: new full speed USB device using ohci_hcd and address 9
usb 2-2: configuration #1 chosen from 1 choice
usb-storage: probe of 2-2:1.0 failed with error -5
option 2-2:1.0: GSM modem (1-port) converter detected
usb 2-2: GSM modem (1-port) converter now attached to ttyUSB0
usb-storage: probe of 2-2:1.1 failed with error -5
option 2-2:1.1: GSM modem (1-port) converter detected
usb 2-2: GSM modem (1-port) converter now attached to ttyUSB1
usb-storage: probe of 2-2:1.2 failed with error -5
option 2-2:1.2: GSM modem (1-port) converter detected
usb 2-2: GSM modem (1-port) converter now attached to ttyUSB2
usb-storage: probe of 2-2:1.3 failed with error -1
Kindly Help.......
Configuration Settings are not provided for this Modem Version.
THanking You
I have ONDA SPA also .......2 Vodafone Connection.........BOth not working........THanks in Advance
First sorry for the late answer, i'm a little bussy, yet posting in bt4 prefinal thread.
and because i'm moving this thread to bt4 prefinal.
http://forums.remote-exploit.org/bac...tml#post138091
this device called Huawei Technologies Co., Ltd. E620 USB Modem. so basically it's hwawei e620 modem.Originally Posted by bitvijays
Maybe you want try to look at this,
http://forums.remote-exploit.org/bac...tml#post139021
for usb_modeswitch, you can add manual configuration, you can look for id storage device and id for modem, then you can edit the configuration, basically (again) the format still the same,
from your output, it's look like your modem vendor 12d1 and id 1001. find the default or storage product id.Code:DefaultVendor= 0x???? ;this is vendor for storage DefaultProduct= 0x???? ;this is product id for storage TargetVendor= 0x???? ;and this line and below belong to modem id. TargetProduct= 0x????
if you done nothing before than lsusb, then that vendor and id belong to your storage default. then you must looking for modem id. because the vendor would be the same.
Regards,
JoeleZ
Posting Permissions