Linksys WUSB54GC v2 (ID 1737:0073) is not detected

[Kalsoman]

Hello.

Linksys WUSB54GC v2 USB wifi dongle has USB ID 1737:0073 and is not detected
Inside device i found RTL8187B chip.
But is it not detect by Backtrack4.

I first time try backtrack4 and linux too. I novice.

lsusb:

Bus 001 Device 008: ID 1737:0073 Linksys
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1737 Linksys
idProduct 0x0073
bcdDevice 2.00
iManufacturer 1 Manufacturer_Realtek
iProduct 2 RTL8187B_WLAN_Adapter
iSerial 3 00e04c000001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 81
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4 Wireless Network Card
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 9
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 2 RTL8187B_WLAN_Adapter
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x07 EP 7 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x89 EP 9 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x0a EP 10 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x0b EP 11 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x0c EP 12 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

airmon-ng start wlan0:


Found 2 processes that could cause trouble.
If airodump-ng, aireplay-ng or airtun-ng stops working after
a short period of time, you may want to kill (some of) them!
-e
PID Name
14579 dhclient3
14934 knetworkmanager


Interface Chipset Driver


[nothing]

Please guys help me. What i should do?
I don't want sell the device.
How to install driver?

[Danboy]

There are many variants of this type of adapter, first off check the label on the back and does it say speedbooster on the front?
>The wusb54gc is compatible with BT
>The wusb54gsc is the speedbooster version and is not compatible.
>The wusb54g is not compatible.

I say this as many companies will restock with another variant, not change the order page on their website and will send you a different version when you place an order. Your adapter should be recognised as rausb0 although you will need the advanced drivers to use the aircrack suite.

[Kalsoman]

Thanks for reply!

On back adapter I see - WUSB54GC v2
Inside - chip RTL8187B
On Aircrack site it is compatible adapter -

USBCard name Chipset Antenna Windows
support Linux
support Notes
Asus
WL-167g v2 Ralink RT73 Internal No Yes
Airlink AWLL3026 Zydas zd1211 Internal No Yes USB info: 0ace:1211
See Notes 1 and 4.
Alfa AWUS036E RTL8187L RP-SMA No Yes 80mW
Alfa AWUS036H rtl8187 RP-SMA No Yes Click here for a test of this adapter
Alfa AWUS036S Ralink rt73 RP-SMA No Yes Click here for a test of this adapter
Digitus DN-7003GS RTL8187L Internal No Yes USB info: 0bda:8187 Realtek Semiconductor Corp.
Manufacturer page
D-Link DWL-G122 B1 Ralink RT2570 Internal No Yes
D-Link DWL-G122 C1 Ralink RT73 Internal No Yes
D-Link WUA-1340 Ralink RT73 Internal No Yes
Edimax EW-7318USg
Hawking HWUG1 Ralink rt73 RP-SMA No Yes See
Note 2
Linksys WUSB54G v4 Ralink rt2570 Internal or
RP-SMA No Yes
Linksys WUSB54GC v1 Ralink RT73 Internal No Yes See
Note 5
Linksys WUSB54GC v2 RTL8187B Internal No Yes See
Note 5
Netgear WG111 v1 PrismGT SoftMAC Internal airodump-ng Untested See note 3. Needs a recent GIT kernel from the wireless-testing branch.
Netgear WG111 v2 RTL8187L Internal No Yes See note 3
TP-Link
TL-WN321G Ralink RT73 Internal No Yes Manufacturer page
Trendnet
TEW-429UB C1 Zydas zd1211b Internal No Yes USB info: 157e:300d
ZyXEL AG-225H Zydas zd1211 Internal No Limited See Note 4
ZyXEL G-202 Zydas zd1211b Internal No Limited See Note 4

But is not detected!

I found this:

Linksys WUSB54GC-EU v2 USB wifi dongle has USB ID 1737:0073 and is not detected
by Ubuntu 9.04 (Jaunty) 64-bit. The Windows driver shows that it has the
RTL8187B chipset so the rtl8187 module should support it.
Add tags
Update description / tags


Link a related branch
Link to CVE
Bug Watch Updater on 2009-05-25 Changed in linux:
status: Unknown → Confirmed

Bug Watch Updater on 2009-05-27 Changed in linux:
status: Confirmed → In Progress

em1n3m wrote on 2009-06-04: (permalink)

i have the same problem on Ubuntu 9.04 (Jaunty) 32-bit

Linksys WUSB54GC-EU v2 USB wifi dongle has USB ID 1737:0073 and is not detected

same output of "lsusb -v" like above

rausb0?

Backtrack4 said-

System information - usb devices:

RTL8187B_WLAN_Adapter

Manufacturer: Manufacturer_Realtek
Serial #: 00e04c000001

Vendor ID 0x1737 (Linksys)
Product ID 0x73

.....

iwconfig
lo no wireless extensions.

eth0 no wireless extensions.


ifconfig rausb0 up
rausb0: ERROR while getting interface flags: No such device


How?..

[Danboy]

Are you using a live cd or vmware image? On VMWARE you have to import your card into the VM (eg I use VMWARE workstation I go to the vm menu, select removable devices and select my adapter from the list) it has to be connected to a VM in this way before BT4 will recognise that it exists.

[secure_it]

There are many variants of this type of adapter, first off check the label on the back and does it say speedbooster on the front?
>The wusb54gc is compatible with BT
>The wusb54gsc is the speedbooster version and is not compatible.
>The wusb54g is not compatible.

I say this as many companies will restock with another variant, not change the order page on their website and will send you a different version when you place an order. Your adapter should be recognised as rausb0 although you will need the advanced drivers to use the aircrack suite.

Wrong!linksys WUSB54G V3 is fully supported with external atenna mods.wusb54GC having rt73 chipset is supported.
all rt73 chipset and rt61 chipset enabled cards are supported by BackTrack

[mese_10]

hi, i'm using backtrack 3 with vmware and whenever I type

"iwconfig" i got these

lo no wireless extensions

eth0 no wireless extensions

I'm using d-lynk wua-1340 with windows xp, I already look on google but not luck. can somebody help me thanks.

[Archangel-Amael]

hi, i'm using backtrack 3 with vmware and whenever I type
"iwconfig" i got these
lo no wireless extensions
eth0 no wireless extensions
I'm using d-lynk wua-1340 with windows xp, I already look on google but not luck. can somebody help me thanks.

See here
HCL:Wireless - Offensive-security.com
BTW: Search next time a little more. Input the proper name of your equipment when making a post, and don't thread hijack.

[da23ad]

I have a WUSB54GC v3.... and it's not detected ....

[CamJ256]

I have a WUSB54GC v3.... and it's not detected ....

same here..i've spent the last four hours trying to get this to work...


Tried many different drivers...closest i got was probably here:

forums.remote-exploit.org/bt4beta-working-hardware/23343-rt2870-bt4-guide-working-3.html


except it doesnt compile under the newest bt4

[068139]

I'm also using the same USB stick, I havn't had any luck in finding a way to get it working. It worked when I ran the system on the live cd. But not when it's fully installed. I have discovered that it is a 'rt73' chipset. Bit stuck though