Results 1 to 2 of 2

Thread: Ralink RT2860sta + Injection?

  1. #1
    Just burned his ISO
    Join Date
    Jan 2010
    Posts
    11

    Default Ralink RT2860sta + Injection? + Compat-wireless Issues

    So title says it all. I really wanna try and get this all working.

    I have an eeepc 901.

    So before the mod declines this post. I have looked at the aircrack sites. and the 2x00 sites and have decided to post mainly because 1. i am stuck, and 2. there are ALOT of dead links.


    So Basically this is what ive done.

    I installed the latest drivers from Ralink (Ralink corp.)
    to 2.3.0.0 i still had 0 luck on the whole injecting.
    (I have not tested WPA connection or WEP connecting)

    lspci -vv
    Code:
    01:00.0 Network controller: RaLink RT2860
            Subsystem: RaLink Device 2790
    Kernel driver in use: rt2860
            Kernel modules: rt2860sta, rt3562sta
    aireplay-ng -9 ra0 (once in monitor mode)
    Code:
    10:41:23  Trying broadcast probe requests...
    10:41:25  No Answer...
    10:41:25  Found 1 AP
    
    10:41:25  Trying directed probe requests...
    10:41:25  00:1D:5A:BA:3C:B1 - channel: 1 - 'The Rock'
    10:41:31   0/30:   0%
    airodump-ng works fine. and i can get packets fine.

    What im mainly stuck on every link pretty much points to saying go to www.2x00.serialmonkey.com to get some drivers for it. eg the daily tarbal which is not linkable.

    On Serialmonkey it said to use the git-clone command. But as i see now that is mainly for if you want to re-compile a kernal (am i right?)

    As of now i am installing using the Compat-wireless drivers, which i assume have the 2x00 drivers in them (again correct me if i am wrong)

    UPDATE 1: Alright... hopefully people are reading this...
    Once i had installed the Compat-wireless drivers it worked for a split second. but now it doesn't work at all, when i blacklist rt2860sta. And go:
    Code:
    modprobe rt2500pci
    What i did have happen was when i went
    Code:
    aireplay-ng -0 10 -a <bssid> -c <clients_mac> ra0
    it came up with the
    Code:
     Sending 64 directed DeAuth. STMAC: [00:33:22:11:22:33] [ 0| 0 ACKs]
    but actually started to count up on both sides. (i gather this is what normally happens on an attack.

    So what i want to know is why its stopped working.
    Last edited by cynofield; 02-24-2010 at 02:04 PM. Reason: compat wireless

  2. #2
    Just burned his ISO
    Join Date
    Mar 2010
    Posts
    3

    Default Re: Ralink RT2860sta + Injection?

    I was trying too to get rt2860 working it did with the original driver from Ralink but injection is not permit without modding the source code first. I thought i would try the apocolipse rt2870 driver but it gave an error with RTMPReadParametersHook and a fsgid error too. I guess he should update the driver to compile under bt4 final.

    10:41:23 Trying broadcast probe requests...
    10:41:25 No Answer...
    10:41:25 Found 1 AP

    10:41:25 Trying directed probe requests...
    10:41:25 00:1D:5A:BA:3C:B1 - channel: 1 - 'The Rock'
    10:41:31 0/30: 0%

    When injection is working you got a % here, like 10/30: 40%

    Anyone got a modded working source driver for rt2860 & rt2870 ?

Similar Threads

  1. Is support USB WIFI Ralink RT2870 IEEE802.11 B/G/N in BT4 ?
    By skrzyh in forum HardWare Compatibility List
    Replies: 13
    Last Post: 03-19-2011, 09:53 PM
  2. eeepc 1000HE RaLink RT2860 fix
    By mfBaranian in forum BackTrack Fixes
    Replies: 12
    Last Post: 03-30-2010, 04:36 AM
  3. ralink RT2860
    By txt3rob in forum Beginners Forum
    Replies: 4
    Last Post: 02-23-2010, 12:02 PM
  4. Replies: 2
    Last Post: 02-17-2010, 11:01 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •