Results 1 to 9 of 9

Thread: Getting 0 ARP requests but i know what im doing

  1. #1
    Just burned his ISO
    Join Date
    Dec 2007
    Posts
    7

    Default Getting 0 ARP requests but i know what im doing

    Hi all, ive cracked a number of WEP networks in the past, but there im having a problem with one.

    Here are my steps:

    airmon-ng stop wlan0
    ifconfig wlan0 down
    macchanger --mac 00:11:22:33:44:55 wlan0
    airmon-ng start wlan0 6

    airodump-ng -c 6 -w capture --bssid APMAC wlan0

    aireplay-ng -1 0 -a APMAC -h 00:11:22:33:44:55 -e AP wlan0
    Sending Authentication Request (open system) [ACK]
    Authentication successful
    Sending Association Request [ACK]
    Association successful :-) [AID: 1]

    aireplay-ng -3 -b APMAC -h 00:11:22:33:44:55 wlan0
    just sits on Reading xxxxx packets (got 0 ARP requests.... etc

    ive tried a bunch of different combinations from reading alot of other posts on this site but nothing seems to work

    i tried doing the --deauth which just brings (u got 0 ARP requests and 9 ACKs)

    Ive used this same method to crack many other 64, 128bit WEPs
    I thought the AP was too far but thats impossible when my power and rxq reads it as if the AP is sitting infront of me (very high signal)

    can someone please help me
    thanks

  2. #2
    Member kazalku's Avatar
    Join Date
    Feb 2009
    Posts
    416

    Default

    I had the same issue in the beginning of my life (well, BT life).........
    Try to reduce the power after you change the MAC:
    Code:
    iwconfig wlan0 rate 1MB
    If you can't explain it simply, you don't understand it well enough -- Albert Einstein

  3. #3
    Just burned his ISO
    Join Date
    Dec 2007
    Posts
    7

    Default

    yes ive tried that in the past and didnt get any luck..

    just tried it right now and it still got 0 ARP requests

    how do i verify that when i set iwconfig wlan0 rate 1MB that its set to 1MB?

    any other suggestions?? thx for all ur help

    maybe i should also mention that im using backtrack 4beta


    also when i do the deauth cmd i get
    Notice: got a deauth/disassoc packet. Is the source MAC adddress assoc?

    not sure what that means

  4. #4
    Member kazalku's Avatar
    Join Date
    Feb 2009
    Posts
    416

    Default

    Quote Originally Posted by potvin View Post
    also when i do the deauth cmd i get
    Notice: got a deauth/disassoc packet. Is the source MAC adddress assoc?

    not sure what that means
    Check the fakeauthentication of your station before deauth the connected station.
    If you can't explain it simply, you don't understand it well enough -- Albert Einstein

  5. #5
    Just burned his ISO
    Join Date
    Dec 2007
    Posts
    7

    Default

    Quote Originally Posted by kazalku View Post
    Check the fakeauthentication of your station before deauth the connected station.
    how do i set or check the fakeauth ?
    i thought thats done thru macchanger

  6. #6
    Member kazalku's Avatar
    Join Date
    Feb 2009
    Posts
    416

    Default

    Please post your exact commands with output. It will be helpful if you can post all the commands & outputs.
    If you can't explain it simply, you don't understand it well enough -- Albert Einstein

  7. #7
    Just burned his ISO
    Join Date
    Dec 2008
    Posts
    4

    Default

    Quote Originally Posted by potvin View Post
    yes ive tried that in the past and didnt get any luck..

    just tried it right now and it still got 0 ARP requests

    how do i verify that when i set iwconfig wlan0 rate 1MB that its set to 1MB?

    any other suggestions?? thx for all ur help
    you can verify the speed of your wifi network simply by typing:
    Code:
    iwconfig
    Suggestion: why don't trying the chopchop attack or the fragmentation attack
    [COLOR="Red"]Tomorrow Can Be Too Late[/COLOR]

  8. #8
    Just burned his ISO
    Join Date
    Dec 2007
    Posts
    7

    Default

    I followed the video of xploitz
    VIDEO: Volume #2 "E-Z No Client Korek Chopchop Attack Tutorial"

    and that worked great
    took a couple hrs but it actually worked!
    thx for all your help everyone

  9. #9
    Junior Member
    Join Date
    May 2009
    Posts
    61

    Default

    Try this command:
    aireplay-ng -2 -p 0841 -c FF:FF:FF:FF:FF:FF -b [bssid] -h [Interface MAC] [device]

    For me always work if i get no replys.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •