Results 1 to 7 of 7

Thread: Realtek rtl8101e 10/100 boot agent HOW TO ENABLE BOOTING

Hybrid View

  1. #1
    Just burned his ISO
    Join Date
    Apr 2009
    Posts
    10

    Default Realtek rtl8101e 10/100 boot agent HOW TO ENABLE BOOTING

    i have this when i press shift + F10

    realtek rtl8101e 10/100 boot agent
    network boot protocol PXE
    Boot Order Int 18h
    Show config message Enable
    Show message Time 3seconds

    how to enable for booting backtrack3 form usb bootable stick

  2. #2
    Just burned his ISO
    Join Date
    Apr 2009
    Posts
    18

    Default

    go into your BIOS and check to see if there are other devices that you can enable for your boot order.
    Hear no evil, Speak no evil...and you'll never be invited to a party.

  3. #3
    Just burned his ISO
    Join Date
    Apr 2009
    Posts
    10

    Default

    how to get into bios

    what key combination at start up

    PLEASE ANSWER..



    ___
    i have laptop with backtrack and it works fine, but on PC i cant play BOOT

  4. #4
    Just burned his ISO
    Join Date
    Apr 2009
    Posts
    18

    Question

    you have got to be kidding me.

    ok, i could go into detail about how accessing the BIOS is different depending on the manufacturer of the hardware...

    or, i could go into the fact that you have failed to list the hardware...

    or i could casually mention that even the most basic google-fu would have answered this question...

    but i think i'll go with 'i don't think you are quite ready for backtrack'.

    i know, i know... it's been used before, plenty of times. but, plagiarism is the highest compliment that I can think of. And besides, why mess with a time-honored tradition?

    good luck!
    ~b
    Hear no evil, Speak no evil...and you'll never be invited to a party.

  5. #5
    Just burned his ISO
    Join Date
    Apr 2009
    Posts
    10

    Default

    Quote Originally Posted by brathadair View Post
    you have got to be kidding me.

    ok, i could go into detail about how accessing the BIOS is different depending on the manufacturer of the hardware...

    or, i could go into the fact that you have failed to list the hardware...

    or i could casually mention that even the most basic google-fu would have answered this question...

    but i think i'll go with 'i don't think you are quite ready for backtrack'.

    i know, i know... it's been used before, plenty of times. but, plagiarism is the highest compliment that I can think of. And besides, why mess with a time-honored tradition?

    good luck!
    ~b

    i have read it on some pages but how to get information about manufracturer
    because startup is to quick and i try with ESCAPE tab for slowing it, but it dont work,,, please if you can me explain..

    my msn if you need qz3b@live.com

    please if you can me show how to get into BIOS on my PC
    i am noot noob how do you think, but i have trooubs with boot
    the information :

    Intel Pentium Core Procesor E2160 1,8Ghz 1Mb c.
    800Mhz LGA775.

    MBO ABIT, S.775,I-S71,SiS 671,BUS 1066Mhz,serial ATA II
    RAID, VGA,7,1 soundLAN,DDR2,mATX

  6. #6
    Just burned his ISO
    Join Date
    Apr 2009
    Posts
    18

    Default

    ok, fine. here's your get out of jail free card. use it wisely.

    the method that you would use to enter your BIOS varies depending on the system manufacturer, not the BIOS manufacturer. The specs that you posted have absolutely nothing to do with this. you need to google keywords such as "enter BIOS key on boot <your system model & manufacturer>"

    i have no doubt that you will find plenty of information on how to enter the BIOS from that.

    however, my original statement stands. i'm not sure that backtrack is what you need to be focusing on.

    go forth and prosper. i believe we are done here...
    ~b
    Hear no evil, Speak no evil...and you'll never be invited to a party.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •