Results 1 to 6 of 6

Thread: ipw2200 and monitor mode

  1. #1
    Just burned his ISO
    Join Date
    Jun 2008
    Posts
    13

    Default ipw2200 and monitor mode

    hello am new com ever wanted to know when I put my card in monitor mode gives me this
    mac address
    Code:
    ifconfig
    eth0      Link encap:UNSPEC  HWaddr 00-15-00-4B-3A-35-04-00-00-00-00-00-00-00-00-00
              inet addr:192.168.1.102  Bcast:192.168.1.255  Mask:255.255.255.0
              inet6 addr: fe80::215:ff:fe4b:3a35/64 Scope:Link

  2. #2
    Junior Member otkaz's Avatar
    Join Date
    Jan 2010
    Location
    Houston, TX
    Posts
    38

    Default

    I have no idea what your asking, but eth0 is generally going to be your lan card, and eth1 should be your ipw2200. Of course if you dont have a lan card it will go to eth0, but once again your question makes no sense.

  3. #3
    Just burned his ISO
    Join Date
    Jun 2008
    Posts
    13

    Default

    hello otkaz, use backtrack 3 and I would like to test wep and wpa of my network, but when active the monitor mode for use the suite aircrack-ng, the mac address of my wireless card from 00-15-00-4B-3A-35 becomes 00-15-00-4B-3A-35-04-00-00-00-00-00-00-00-00-00
    I would like to make with this card I could do packet injection
    Code:
    Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
    driver ipw2200

  4. #4
    Just burned his ISO
    Join Date
    Mar 2009
    Posts
    9

    Default

    Your English is too bad too understand.

    I would like to make with this card
    just make sure you remove the card from your p.c and theres no power running into it first, as this could give you a nasty shock and could proove fatal if your a sloppy kisser.

  5. #5
    Just burned his ISO
    Join Date
    Jun 2008
    Posts
    13

    Default

    I'm italian, I apologize for my English not very understandable
    I want to do packet injection with this card

  6. #6
    Senior Member
    Join Date
    Aug 2007
    Posts
    916

    Default

    search on aircrack-ng for ipw2200.

    As for the first post with that output.. I presume you are not using bt4b. One of your device will be listed with full information if you use iwconfig whereas the other one will be listed as no wireless extensions. The one that isn't being shown with wireless extensions isn't your wireless interface but the other one is.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •