Results 1 to 2 of 2

Thread: 2wire (orinoco gold) pcmcia not showing up?

  1. #1
    Just burned his ISO
    Join Date
    Jun 2007
    Posts
    13

    Default 2wire (orinoco gold) pcmcia not showing up?

    I read a thread somewhere else that said BT3 removed the Orinoco drivers, are they currently in BT4 beta?
    I'm using a HP laptop DV4165cl. My pcmcia card shows "2WIRE" on the front, the back part # is 1000-100016-002; Agere systems PC24E-11-FC/R, and 2 boxes are checked: 5V and 16.


    My ifconfig shows this:
    Code:
    root@bt:~# ifconfig -a
    eth0      Link encap:Ethernet  HWaddr 00:0a:e4:d2:fc:b0
              BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
              Interrupt:20 Base address:0x3000
    
    eth1      Link encap:Ethernet  HWaddr 00:12:f0:7a:cf:f4
              BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:19 errors:0 dropped:0 overruns:0 frame:0
              TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
              Interrupt:20 Base address:0xa000 Memory:b0106000-b0106fff
    
    lo        Link encap:Local Loopback
              inet addr:127.0.0.1  Mask:255.0.0.0
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
    I might be wrong but it looks like both my onboard wireless and my pcmcia card are detected here.

    However, when I run airmon-ng it displays this:
    Code:
    root@bt:~# airmon-ng
    
    
    Interface       Chipset         Driver
    
    eth1            Intel 2200BG    ipw2200
    So only my Intel wireless shows up.

    In another post I've seen requests for dmesg and lspci, so here are the results for both.

  2. #2
    Just burned his ISO
    Join Date
    Jun 2007
    Posts
    13

    Default

    Dmesg (it wont all fit so heres a few lines of beginning and end):
    Code:
    BIOS EBDA/lowmem at: 0009f800/0009f800
    Linux version 2.6.28.1 (root@bt) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu12) ) #2 SMP Wed Feb 4 21:50:02 EST 2009
    KERNEL supported cpus:
      Intel GenuineIntel
      AMD AuthenticAMD
      NSC Geode by NSC
      Cyrix CyrixInstead
      Centaur CentaurHauls
      Transmeta GenuineTMx86
      Transmeta TransmetaCPU
      UMC UMC UMC UMC
    PAT WC disabled due to known CPU erratum.
    pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0
    pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0

    Lspci:
    Code:
    00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04)
    00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
    00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
    00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
    00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
    00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
    00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
    00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
    00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
    00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04)
    00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 04)
    00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
    00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04)
    00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
    06:05.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
    06:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
    06:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
    06:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
    06:06.4 SD Host controller: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
    06:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
    Hope this is all you guys need.
    Thanks a lot!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •