Results 1 to 9 of 9

Thread: Booting Error

  1. #1
    Just burned his ISO
    Join Date
    Feb 2009
    Posts
    19

    Default Booting Error

    Hello Word

    I burn a DVD with bt4 and at boot time i get this error:
    Code:
    PCI 0000:00:09.0:BAR0: Can't allocate resource
    PCI 0000:01:00.0:BAR6: Can't allocate mem resource [0x0000000 0xcfffffff]
    Any idea what is going on?

  2. #2
    Junior Member
    Join Date
    Dec 2008
    Posts
    43

    Default

    I have that error too.

    Any one know what it means?

  3. #3
    Just burned his ISO
    Join Date
    Dec 2008
    Posts
    21

    Default

    Same Error here

    Code:
    Mar  4 02:17:34 bt kernel: SCSI subsystem initialized
    Mar  4 02:17:34 bt kernel: libata version 3.00 loaded.
    Mar  4 02:17:34 bt kernel: usbcore: registered new interface driver usbfs
    Mar  4 02:17:34 bt kernel: usbcore: registered new interface driver hub
    Mar  4 02:17:34 bt kernel: usbcore: registered new device driver usb
    Mar  4 02:17:34 bt kernel: PCI: Using ACPI for IRQ routing
    Mar  4 02:17:34 bt kernel: pci 0000:00:1c.1: BAR 8: can't allocate resource
    Mar  4 02:17:34 bt kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    Mar  4 02:17:34 bt kernel: hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    Mar  4 02:17:34 bt kernel: pnp: PnP ACPI init
    Mar  4 02:17:34 bt kernel: ACPI: bus type pnp registered
    Mar  4 02:17:34 bt kernel: pnp: PnP ACPI: found 11 devices
    Mar  4 02:17:34 bt kernel: ACPI: ACPI bus type pnp unregistered
    Mar  4 02:17:34 bt kernel: system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
    Mar  4 02:17:34 bt kernel: system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
    Mar  4 02:17:34 bt kernel: system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
    Mar  4 02:17:34 bt kernel: system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
    Mar  4 02:17:34 bt kernel: system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
    Mar  4 02:17:34 bt kernel: system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
    Mar  4 02:17:34 bt kernel: system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
    Mar  4 02:17:34 bt kernel: system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
    Mar  4 02:17:34 bt kernel: system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
    Mar  4 02:17:34 bt kernel: system 00:06: ioport range 0x680-0x69f has been reserved
    Mar  4 02:17:34 bt kernel: system 00:06: ioport range 0x800-0x80f has been reserved
    Mar  4 02:17:34 bt kernel: system 00:06: ioport range 0x1000-0x107f has been reserved
    Mar  4 02:17:34 bt kernel: system 00:06: ioport range 0x1180-0x11bf has been reserved
    Mar  4 02:17:34 bt kernel: system 00:06: ioport range 0x1640-0x164f has been reserved
    Mar  4 02:17:34 bt kernel: system 00:06: ioport range 0xfe00-0xfe00 has been reserved
    Mar  4 02:17:34 bt kernel: system 00:07: ioport range 0x6a0-0x6af has been reserved
    Mar  4 02:17:34 bt kernel: system 00:07: ioport range 0x6b0-0x6ff has been reserved
    Mar  4 02:17:34 bt kernel: pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
    Mar  4 02:17:34 bt kernel: pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    Mar  4 02:17:34 bt kernel: pci 0000:00:01.0:   IO window: 0x2000-0x2fff
    Mar  4 02:17:34 bt kernel: pci 0000:00:01.0:   MEM window: 0xc4000000-0xc6ffffff
    Mar  4 02:17:34 bt kernel: pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff

  4. #4
    Moderator KMDave's Avatar
    Join Date
    Jan 2010
    Posts
    2,281

    Default

    How about some more information about the system you are using.

    Did you check the download before burning it to a DVD?
    Tiocfaidh ár lá

  5. #5
    Just burned his ISO
    Join Date
    Dec 2008
    Posts
    21

    Default

    Yes, iso file has been checked and is OK. Installed to a USB drive using unetbutin, been getting the error from the first boot, and continually now using persistent changes. I haven't encountered any problems yet, ever bit of hardware I've used has worked fine (that i know of)

    System is a HP dv9000/dv9500, dv9535nr is the exact model.


    Code:
    root@bt:~# lspci
    00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
    00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
    00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
    00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
    00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
    00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
    00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
    00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
    00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
    00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
    00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
    01:00.0 VGA compatible controller: nVidia Corporation GeForce 8600M GS (rev a1)
    02:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
    06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
    07:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
    07:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
    07:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
    07:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
    07:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)
    root@bt:~# lsusb
    Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 004 Device 002: ID 0a5c:2101 Broadcom Corp. A-Link BlueUsbA2 Bluetooth
    Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 004 Device 003: ID 046d:c521 Logitech, Inc. MX620 Laser Cordless Mouse
    Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 005 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
    Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 002 Device 004: ID 064e:a101 Suyin Corp. Acer CrystalEye Webcam
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 002: ID 0000:0000
    root@bt:~# lsdev
    Device            DMA   IRQ  I/O Ports
    ------------------------------------------------
    0000:00:1a.0                 1800-181f
    0000:00:1a.1                 1820-183f
    0000:00:1d.0                 1840-185f
    0000:00:1d.1                 1860-187f
    0000:00:1d.2                 1880-189f
    0000:00:1f.0                 1000-107f 1180-11bf
    0000:00:1f.1                 0170-0177 01f0-01f7 0376-0376 03f6-03f6 18a0-18af
    0000:00:1f.2                 18c8-18cb 18cc-18cf 18d0-18d7 18d8-18df 18e0-18ff
    0000:00:1f.3                 1c00-1c1f
    0000:01:00.0                   2000-207f
    0000:06:00.0                   c000-c0ff
    acpi                      9
    ACPI                             1000-1003     1004-1005     1008-100b     1010-1015     1020-1020     1028-102f
    ahci                           18c8-18cb   18cc-18cf   18d0-18d7   18d8-18df   18e0-18ff
    cascade             4
    dma                          0080-008f
    dma1                         0000-001f
    dma2                         00c0-00df
    eth0                     17
    fpu                          00f0-00ff
    i8042                  1 12
    ide0                     14
    ide1                     15
    Intel                    22
    iTCO_wdt                         1030-1033     1060-107f
    keyboard                     0060-0060 0064-0064
    mmc0                     21
    nvidia                   16
    ohci1394                 20
    PCI                          0cf8-0cff 2000-2fff 4000-7fff 8000-bfff c000-cfff
    pic1                         0020-0021
    pic2                         00a0-00a1
    piix                           0170-0177   01f0-01f7   0376-0376   03f6-03f6   18a0-18af
    pnp                          0680-069f 06a0-06af 06b0-06ff 0800-080f   1000-107f   1180-11bf 1640-164f fe00-fe00
    r8169                            c000-c0ff
    timer                     0
    timer0                       0040-0043
    timer1                       0050-0053
    uhci_hcd                       1800-181f   1820-183f   1840-185f   1860-187f   1880-189f
    uhci_hcd:usb5            23
    uhci_hcd:usb6            19
    uhci_hcd:usb7            18
    vesafb                       03c0-03df
    wd7000                       0320-0323 0350-0353
    root@bt:~# cat /proc/cpuinfo
    processor       : 0
    vendor_id       : GenuineIntel
    cpu family      : 6
    model           : 15
    model name      : Intel(R) Core(TM)2 Duo CPU     T5250  @ 1.50GHz
    stepping        : 13
    cpu MHz         : 1496.287
    cache size      : 2048 KB
    physical id     : 0
    siblings        : 2
    core id         : 0
    cpu cores       : 2
    apicid          : 0
    initial apicid  : 0
    fdiv_bug        : no
    hlt_bug         : no
    f00f_bug        : no
    coma_bug        : no
    fpu             : yes
    fpu_exception   : yes
    cpuid level     : 10
    wp              : yes
    flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm
    bogomips        : 2992.57
    clflush size    : 64
    power management:
    
    processor       : 1
    vendor_id       : GenuineIntel
    cpu family      : 6
    model           : 15
    model name      : Intel(R) Core(TM)2 Duo CPU     T5250  @ 1.50GHz
    stepping        : 13
    cpu MHz         : 1496.287
    cache size      : 2048 KB
    physical id     : 0
    siblings        : 2
    core id         : 1
    cpu cores       : 2
    apicid          : 1
    initial apicid  : 1
    fdiv_bug        : no
    hlt_bug         : no
    f00f_bug        : no
    coma_bug        : no
    fpu             : yes
    fpu_exception   : yes
    cpuid level     : 10
    wp              : yes
    flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm
    bogomips        : 2992.45
    clflush size    : 64
    power management:

  6. #6
    Moderator KMDave's Avatar
    Join Date
    Jan 2010
    Posts
    2,281

    Default

    So is it just coming up and you mind it?

    Doing a bit of Google search for you.

    I came up with the information:

    that should be harmless... your BIOS have mmconf addr in BAR too, and
    that BAR is read only, and BIOS should hide it to OS,
    So that has nothing to do with BT itself. Most likely an "issue" with the kernel/BIOS combination but nothing to worry about.
    Tiocfaidh ár lá

  7. #7
    Just burned his ISO
    Join Date
    Dec 2008
    Posts
    21

    Default

    Thanks for the information. Would have looked it up myself if I didn't assume it was a BT4 problem.

    I actually just updated my bios for something else, and the BAR 8 error went away.

  8. #8
    Moderator KMDave's Avatar
    Join Date
    Jan 2010
    Posts
    2,281

    Default

    Good, so that is a fix

    Well always search for it since BT is also Linux, based on Ubuntu. And with being based on Ubuntu chances are high that you will find error/warning descriptions on Google. If it is not directly an application coming with BT. And even then chances are not too bad to do a Google search
    Tiocfaidh ár lá

  9. #9
    Just burned his ISO
    Join Date
    Jan 2009
    Posts
    2

    Default Based on what????

    I thought this was a slax/slackware based distro.. derrr... WTF...???

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •