`When i i follow this command
Iwconfig wlan0 mode monitor channel 13
error for wireless regquest ''set frequency''
set failed on device wlan0 ; invalid arugment
but other channels are working:
aireplay-ng -3 -b -------------- -h 00:11:22:33:44:55 wlan0
For information, no action required: Using gettimeofday() instead of /dev/rtc
05:25:20 Waiting for beacon frame (BSSID: ---------) on channel 11
05:25:20 wlan0 is on channel 11, but the AP uses channel 13
is there a solution for this problem
Of course, if you really wanted to have some fun, go to Wal-Mart late at night and ask the greeter if they could help you find trashbags, roll of carpet, rope, quicklime, clorox and a shovel. See if they give you any strange looks. --Streaker69
europa....... and in windows is everthing working perfect
btw network card bcm4311
i found a threat but its not working
i get a error afther this command
sudo sysctl -a | grep country
error: permission denied on key 'net .ipv4.route.flush'
and i try this also
sudo sysctl -a 00:00:00:00:00:00 ( mac adres adapter) | grep country
when i press enter i get no message just a new command rule
then i followed this command
echo "options bmc_pci countrycode=826" | sudo tee -a /etc/modprobe.d/options.
then i get a new rule with
In windows we can set the channel even there is regulation boundation by configuring driver properties and to set country and channel & there is nothing to do this with US drivers.
to OP:you need a patch to bypass this channel limit set by region basis.
same error m8
how i will set iwconfig on channel 13 pfff this a good bug for beta 4 hahah
with the bcm43