Intel Wireless Wi-Fi 5100 Card injection

[secure_it]

To change iwlwifi driver i've used backtrack with persistant changes,

downloaded compat wireless from here

wireless. kernel. org/ en / users / Download

extracted them, gone into dir, downloaded patch for better injection

patches. aircrack-ng. org/ mac80211_2.6.28-rc4-wl_frag+ack_v3.patch

now, to patch drivers do

patch -p1 < mac80211_2.6.28-rc4-wl_frag+ack_v3.patch

now we have to install drivers

make
make install
make unload
make load

so now we have drivers working.

For fakeauth the aircrack-ng method doesn't works with 4965, and I think doesn't also with 5100...Cause a firmware bug, you have to use a auth with wpa_supplicant, to do this open a file and call it wpa_supplicant.conf, in it type

network={
ssid="essid of network"
key_mgmt=NONE
#wep_key0="fakeauth"
}

and then use aircrack suite normally..

PS: sorry for the spaces into urls but i haven't posted 15 mesg...

Don't copy and paste from other forums or sites.are you moron or what.

here is direct link
http://www.aircrack-ng.org/doku.php?id=iwlagn

[alex88]

al3x88. wordpress. com

i haven't copied from other sites, this is my site, i've helped into aircrack forum how to get injection working fine, i've writed 2 guides with the diffs from older and newer kernel in how-to crack wep and more..so not only copied and pasted, i've seen injection growing into my 4965 card, and not just waited for a solution and used..

[White]

I can confirm now I have done all of the above and injection is working very well on an Intel 5300.

I had a hard time at first because I was trying to use the wlan0 for injection. You should use mon0 and it will work fine.

One thing I still can't get to work is the CUDA. Whenever I try to install it (bash CUDA_INSTALL) it tells me -o is not a dpkg option. I have a 9800M GT .

[Veneria]

Hi all ,

First,sorry for my bad english, i'm not english.

I follow the instruction of Alex88, but my Intel 5100 cards have some problems to inject. When I test my card i can see

For information, no action required: Using gettimeofday() instead of /dev/rtc
13:04:04 Trying broadcast probe requests...
13:04:04 Injection is working!
13:04:06 Found 4 APs

13:04:06 Trying directed probe requests...
13:04:06 00:16:38:1A:49:54 - channel: 11 - 'ALICE-1A4949'
13:04:10 Ping (min/avg/max): 3.968ms/128.799ms/203.823ms Power: -66.79
13:04:10 29/30: 96%

and 3minute latter : the injection doesn't work. When I test aireplay-ng -3 i can see

Saving ARP requests in replay_arp-0318-130646.cap
You should also start airodump-ng to capture replies.
Read 2144 packets (got 6 ARP requests and 10 ACKs), sent 3947 packets...(411 pps
Read 2168 packets (got 6 ARP requests and 10 ACKs), sent 3995 packets...(411 pps
Read 2194 packets (got 6 ARP requests and 10 ACKs), sent 4047 packets...(412 pps
Read 2217 packets (got 6 ARP requests and 10 ACKs), sent 4093 packets...(412 pps

What can I do to repair this bug ?

Thanks,

[n00b_h4xx0r]

yes i have the same problem, but im to stupid to follow his instructions i dont understand certain steps. Would sum1 be nice to explain it, like a tutorial?

[superkato]

I patched the 8.10 Kernel with an injection patch for AGN Cards!

Downloads for 64bit and 32bit:

www superkato net

[RageLtMan]

superkato, what patched did you use, and which kernel source did you patch?


alex, aircrack-ng.org seems to be down, do you have a copy of the patch you used on the compat driver? Does anyone? this problem is VERY odd - my 5100AGN worked perfectly until i got back to the US at which point injection seems to die after the inital fakeauth/injection attempt on my rather simple WEP network.

[imported_MastahRiz]

I have a 5350 that I'm trying to get this working with. Post my results here soon.

[sκy_walκer]

I have a 5350 that I'm trying to get this working with. Post my results here soon.

you better wait for BT5 :P don't waste your time ;D

[imported_MastahRiz]

Hello,
I have a Dell Studio 1537 notebook with a Intel Wireless Wi-Fi 5100 Card. This card is supported by BT4 but the injection mode isn’t supported. I found a forum witch says: „In order to get injection working on Intel 5100 card download the latest linux-2.6.27-rc7.tar.bz2 kernel and patch the iwlwifi driver with the diffs from the latest kernel iwlwifi driver changes from Stefanik Gábor here”
link: tinyshell.be/aircrackng/forum/index.php?topic=4217.0

So my question: How to change the iwlwifi driver in the BT4?
Thank you for help!

sounds about right-- i'm in the same boat as you, still trying to figure this out since I don't have any experience with it and have primarily been a windows user till now. I'll let you know if I get it working and what I did.