Page 9 of 10 FirstFirst ... 78910 LastLast
Results 81 to 90 of 95

Thread: BT4 beta Hard drive install

  1. #81
    Just burned his ISO
    Join Date
    Nov 2007
    Posts
    7

    Default

    please help me with this problem

    i've got a message like this
    Code:
    cp:preserving permission for '/mnt/bt/dev/hda' : Operation not supported
    cp:cannot start '/user' : No such file or directory
    when i type
    Code:
    cp --preserve -R \
    /{bin,dev,home,pentest,root,usr,boot,etc,lib,opt,sbin,var} /mnt/bt/

  2. #82
    Super Moderator Archangel-Amael's Avatar
    Join Date
    Jan 2010
    Location
    Somewhere
    Posts
    8,012

    Default

    Quote Originally Posted by phenom View Post
    please help me with this problem

    i've got a message like this
    Code:
    cp:preserving permission for '/mnt/bt/dev/hda' : Operation not supported
    cp:cannot start '/user' : No such file or directory
    when i type
    Code:
    cp --preserve -R \
    /{bin,dev,home,pentest,root,usr,boot,etc,lib,opt,sbin,var} /mnt/bt/
    Get rid of the red above and all should work out just fine. /
    Remember to make sure all partitions are mounted before doing this.
    To be successful here you should read all of the following.
    ForumRules
    ForumFAQ
    If you are new to Back|Track
    Back|Track Wiki
    Failure to do so will probably get your threads deleted or worse.

  3. #83
    Just burned his ISO
    Join Date
    Nov 2007
    Posts
    7

    Default

    thanks friend
    i tried to install it through startx
    but i got a problem to access the root
    can you help me?
    or anyone wanna share with me?

  4. #84
    My life is this forum Barry's Avatar
    Join Date
    Jan 2010
    Posts
    3,817

    Default

    Quote Originally Posted by archangel.amael View Post
    Get rid of the red above and all should work out just fine. /
    Remember to make sure all partitions are mounted before doing this.
    I think you highlighted the wrong slash, it should be..

    Code:
    cp --preserve -R /{bin,dev,home,pentest,root,usr,boot,etc,lib,opt,sbin,var} /mnt/bt/
    That's all one line, and there should be no spaces between the directories. Also phenom, you are using the beta dvd and not the newer pre dvd correct?
    Of course, if you really wanted to have some fun, go to Wal-Mart late at night and ask the greeter if they could help you find trashbags, roll of carpet, rope, quicklime, clorox and a shovel. See if they give you any strange looks. --Streaker69

  5. #85
    Super Moderator Archangel-Amael's Avatar
    Join Date
    Jan 2010
    Location
    Somewhere
    Posts
    8,012

    Default

    Quote Originally Posted by Barry View Post
    I think you highlighted the wrong slash, it should be..

    Code:
    cp --preserve -R /{bin,dev,home,pentest,root,usr,boot,etc,lib,opt,sbin,var} /mnt/bt/
    That's all one line, and there should be no spaces between the directories. Also phenom, you are using the beta dvd and not the newer pre dvd correct?
    There is a post around here on the subject and I was looking at it to make sure. It doesn't show it but I actually edited it because I had the other one.
    Then I looked back at the beginning. Post two and 4 talks about it.
    To be successful here you should read all of the following.
    ForumRules
    ForumFAQ
    If you are new to Back|Track
    Back|Track Wiki
    Failure to do so will probably get your threads deleted or worse.

  6. #86
    Just burned his ISO
    Join Date
    Nov 2007
    Posts
    7

    Default

    @Barry
    no friend
    i use the pre final
    and i write them in one line

    and i've just found the solution with the root password here

    thanks to all of my friend here

    hope i'll learn every day with more and more passion

  7. #87
    My life is this forum Barry's Avatar
    Join Date
    Jan 2010
    Posts
    3,817

    Default

    Quote Originally Posted by phenom View Post
    @Barry
    no friend
    i use the pre final
    and i write them in one line

    and i've just found the solution with the root password here

    thanks to all of my friend here

    hope i'll learn every day with more and more passion
    I don't think that method works with pre final. Startx and hit the install.sh icon on the desktop.
    Of course, if you really wanted to have some fun, go to Wal-Mart late at night and ask the greeter if they could help you find trashbags, roll of carpet, rope, quicklime, clorox and a shovel. See if they give you any strange looks. --Streaker69

  8. #88
    Just burned his ISO
    Join Date
    Jun 2009
    Posts
    1

    Unhappy

    Ok, hopefully this is just a matter of a PEBKAC issue...

    I am installing following along the PDF. I have created the partitions using fdisk and have the following
    Code:
    root@bt:~# fdisk /dev/sda
    
    Command (m for help): p
    
    Disk /dev/sda (Sun disk label): 255 heads, 63 sectors, 9730 cylinders
    Units = cylinders of 16065 * 512 bytes
    
       Device Flag    Start       End    Blocks   Id  System
    /dev/sda1  u          0        16    128520   83  Linux native
    /dev/sda2  u         16       147   1052257+  82  Linux swap
    /dev/sda3           147      9730  76975447+  83  Linux native
    Now when I go to run the mke2fs /dev/sda1 I get...

    Code:
    root@bt:~# mke2fs /dev/sda1
    mke2fs 1.41.3 (12-Oct-2008)
    Could not stat /dev/sda1 --- No such file or directory
    
    The device apparently does not exist; did you specify it correctly?
    so, I go and list the /dev directory:
    Code:
    root@bt:~# ls -l /dev/sd*
    brw-rw---- 1 root disk 8,  0 2009-06-30 09:45 /dev/sda
    brw-rw---- 1 root disk 8, 16 2009-06-30 09:19 /dev/sdb
    brw-rw---- 1 root disk 8, 17 2009-06-30 09:19 /dev/sdb1
    it looks like the OS isn't finding/recognizing the SDA partitions... any suggestions?

    Here is the output of my mount command
    Code:
    root@bt:~# mount
    aufs on / type aufs (rw)
    tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
    /proc on /proc type proc (rw,noexec,nosuid,nodev)
    sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
    varrun on /var/run type tmpfs (rw,nosuid,mode=0755)
    varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
    udev on /dev type tmpfs (rw,mode=0755)
    tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
    devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
    /dev/root on /mnt/live type ext2 (rw,errors=continue)
    /proc on /mnt/live/proc type proc (rw)
    /dev/loop22 on /mnt/live/lib/modules/2.6.28.1/kernel/drivers type squashfs (ro,noatime)
    /dev/sdb1 on /mnt/live/mnt/sdb1 type vfat (rw,noatime,fmask=0000,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,check=s,quiet)
    tmpfs on /mnt/live/memory type tmpfs (rw,size=1236868k)
    /dev/loop0 on /mnt/live/memory/images/bin.lzm type squashfs (ro,noatime)
    /dev/loop2 on /mnt/live/memory/images/etc.lzm type squashfs (ro,noatime)
    /dev/loop3 on /mnt/live/memory/images/home.lzm type squashfs (ro,noatime)
    /dev/loop4 on /mnt/live/memory/images/lib.lzm type squashfs (ro,noatime)
    /dev/loop5 on /mnt/live/memory/images/opt.lzm type squashfs (ro,noatime)
    /dev/loop6 on /mnt/live/memory/images/pentest.lzm type squashfs (ro,noatime)
    /dev/loop7 on /mnt/live/memory/images/root.lzm type squashfs (ro,noatime)
    /dev/loop8 on /mnt/live/memory/images/sbin.lzm type squashfs (ro,noatime)
    /dev/loop9 on /mnt/live/memory/images/usr.lzm type squashfs (ro,noatime)
    /dev/loop10 on /mnt/live/memory/images/var.lzm type squashfs (ro,noatime)
    /dev/sdb1 on /boot type vfat (rw,noatime,fmask=0000,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,check=s,quiet)
    /dev/sdb1 on /mnt/sdb1 type vfat (rw,noatime,quiet,umask=0,check=s,shortname=mixed)
    I am at a loss here... any suggestions?

  9. #89
    Just burned his ISO
    Join Date
    Jun 2009
    Posts
    15

    Default Driving Me :eek:

    Hi Pps

    Can someone please help me out ive been googling my nuts off and reading post after post. With various problems im coming across. Im getting this;

    cp --preserve -R /{bin,dev,home,pentest,root,usr,boot,etc,lib,opt,sb in,var} /mnt/bt

    cp: preserving permissions for `/mnt/bt/dev/hdb': Operation not supported
    cp: reading `/pentest/voip/ucsniff/ffmpeg/ffserver': Input/output error

    and so on. Whenever i try to "cp --preserve -R /{bin,dev,home,pentest,root,usr,boot,etc,lib,opt,sb in,var} /mnt/bt"

    Where does the /mnt/bt/dev/hdb come from my partions are hda1/hda2/hda3.

    God im lost, please help

  10. #90
    Just burned his ISO
    Join Date
    Aug 2009
    Posts
    1

    Default

    I need an complete tut of install Bt4 at desktops

    please help me

Page 9 of 10 FirstFirst ... 78910 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •