Finally I get it. I tell you
This was the scenario in wich I worked:
Code:
Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller
kernel 2.6.21.5
module r8169
but with that config lspci returned:
Code:
Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev ff) (prog-if ff) !!! Unknown header type 7f
And was unable to connect with the dhcp server. Netconfig didn't worked at all, and ifconfig returned:
Code:
Morphy documentation # ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:XX:C4:XX:XX:XX
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:2061255265 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:18 Base address:0x8000
I downloaded r1868 from Realtek:
Code:
ftp://61.56.69.18/cn/nic/r8168-8.009.00.tar.bz2
and added r8169 to blacklist
Code:
echo r8169 >> /etc/modprobe.d/blacklist
Rebooted and now that is what returns lspci:
Code:
07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
Subsystem: Dell Unknown device 0273
Flags: bus master, fast devsel, latency 0, IRQ 18
I/O ports at 5000 [size=256]
Memory at f8610000 (64-bit, prefetchable) [size=4K]
Memory at f8600000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at f8620000 [disabled] [size=64K]
Capabilities: [40] Power Management version 3
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
Capabilities: [70] Express Endpoint IRQ 1
Capabilities: [b0] MSI-X: Enable- Mask- TabSize=2
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00
Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller
Posting Permissions