first, your title says wpa, not wep.
secondly, try the following:
aireplay-ng --test wlan0
That will test if injection will work with your card.
Cant break into my own wep signal, possibly hardware?
Hey guys, so, I tried backtrack v3 right when it came out, and the thing that got my attention the most was cracking into WEP Networks. So I tried it on my own network, and it didnt work, I figured, faulty software or faulty something. Then i hear my friend likes it to, so he brings over his mac, and he can crack right into my WEP!
When I try it, everything seems to work perfectly except when I type
aireplay-ng -3 b [my routers mac] -h 00:11:22:33:44:55 wlan0
I get NO ARP requests, not a single one. even if there is activity on the network.
My Laptop is a new acer aspire 5920, does the wireless card in it not work with injection?
Thank you so much guys!
first, your title says wpa, not wep.
secondly, try the following:
aireplay-ng --test wlan0
That will test if injection will work with your card.
stupid me, wasnt thinking, just working.
Ill try that right now
I installed it on my local computer (so I dont need to boot into the cd for now), and ran that line.
Can I purchase a wireless card that is supported? Is there a list of ones that are supported?root@justin-laptop:~# aireplay-ng --test wlan0
ioctl(SIOCSIWMODE) failed: Device or resource busy
ARP linktype is set to 1 (Ethernet) - expected ARPHRD_IEEE80211
or ARPHRD_IEEE80211_PRISM instead. Make sure RFMON is enabled:
run 'ifconfig wlan0 up; iwconfig wlan0 mode Monitor channel <#>'
Sysfs injection support was not found either.
Error kind of tells you everything.
Make sure wlan0 is even a valid wireless interface:
iwconfig
Make sure it's in monitor mode:
airmon-ng start wlan0
as far as purchasing a card, sure. I have the Hawking HWUG1 and it works quite well. I honestly don't know what kind of card the ACER has in it nor the time to help you troubleshoot it past this point. Good luck.
wlan0 (intel) is not able to do injection PERIOD!
atheros (ath0) cards do.
This is a hackers forum :P
root ~# aircrack-ng pwnd-01.cap
Lenovo Thinkpad R500, OS: Ubuntu 8.10, BackTrack3, Windows XP (VirtualBox), Windows Vista, Windows 7 beta
interesting...My Intel Pro card injects just find.
modprobe -r iwl3945
modprobe ipwraw
My ralink hawking works pretty well too
Just purchased itOriginally Posted by theberries
I put rausb0 into monitor mode after I changed the mac, and it wont see any wireless networks... what am I missing?
(I ran airodump-ng rausb0, with no results, but when I run airodump-ng wlan0 I see 4 networks)
EDIT: Got it! running aireplay-ng to capture packets, 5000 packets read, and 1 arp request, aircrack-ng fails, ill wait for more arp request
Wow, I have 26 IVs, says that airecrack failed, next try with 5000 IVs... I need to wait for 5000? Thats gonna take all night
I'm sure there's an easier way (via a script) but this is what I do with my hwug1:
ifconfig rausb0 down
modprobe -r rt73
modprobe rt73
ifconfig rausb0 up
airmon-ng start rausb0
airodump-ng rausb0
jeesh...I should really script that
With that card, you have to do the following for injection:
iwconfig rausb0 rate 1M
Also, being closer (or having a better antenna) to the AP will greatly increase your success. Sounds like you're testing your AP so that should be a non issue.
Just out of curiosity, did my steps help you or did you just figure it out?
I got 1 arp packet before, canceled it, then ran your commands, and continued, now its slower with 0 arp requests at 10000 packets read, lolI'm sure there's an easier way (via a script) but this is what I do with my hwug1:
ifconfig rausb0 down
modprobe -r rt73
modprobe rt73
ifconfig rausb0 up
airmon-ng start rausb0
airodump-ng rausb0
jeesh...I should really script that
Havent gotten it working just yet
It is my network, and the above command didnt seem to do anything.
Back to square one... wtf
Here are my exact commands
ifconfig rausb0 down
macchanger --mac 00:11:22:33:44:55 rausb0
airmon-ng start rausb0
airodump-ng rausb0
Wont show any networks, but when I dont change my mac or run any of the above commands other than airodump-ng rausb0, it will find 5
Not sure about why the macchanger would affect sniffing or injecting but just try it like this for now:
ifconfig rausb0 down
modprobe -r rt73
modprobe rt73
ifconfig rausb0 up
iwconfig rausb0 rate 1M
iwconfig rausb0 (just to confirm the rate was set)
airmon-ng start rausb0
airodump-ng rausb0
*/find your ap bssid and channel /*
ctrl+c (ok, so you know this, just in case
airodump-ng -c X -w wepcrack --bssid yourapbssid rausb0
aireplay -1 0 -a apbssid rausb0
aireplay -3 -b apbssid rausb0
I might have those a and b flags mixed. Make sure mac filtering isn't set on your router/ap.
Actually, just noticed this is under BT3 beta. Are you running beta or final? I haven't tested any of the above in Beta. I don't even know if RT73 is in beta.
Posting Permissions
