Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Zydas Injection

  1. #1
    Junior Member LordIfrit's Avatar
    Join Date
    Mar 2008
    Posts
    31

    Exclamation Zydas Injection

    Hello, I installed Aircrack ng-1.0-rc1 and I also installed the patch for WiFi Zydas with this tutorial:
    ------------------------------------------------------------------------
    Copy contents of /usr/src/linux/net/ieee80211 to a safe place
    Copy contents of /usr/src/linux/drivers/net/wireless/zd1211rw to safe place

    Copy zd1211rw_inject_2.6.23.patch to /usr/src/linux/

    cd /usr/src/linux/
    patch -Np1 --verbose --dry-run -i zd1211rw_inject_2.6.23.patch
    patch -Np1 --verbose -i zd1211rw_inject_2.6.23.patch

    Copy ieee80211_inject.patch to /usr/src/linux

    patch -Np1 --verbose --dry-run -i ieee80211_inject.patch
    patch -Np1 --verbose -i ieee80211_inject.patch

    cd /usr/src/linux/drivers/net/wireless/zd1211rw
    make -C /lib/modules/`uname -r`/build/ M=`pwd` modules
    cd /usr/src/linux/net/ieee80211
    make -C /lib/modules/`uname -r`/build/ M=`pwd` modules

    cp /usr/src/linux/drivers/net/wireless/zd1211rw/zd1211rw.ko /lib/modules/`uname -r`/kernel/drivers/net/wireless/zd1211rw/zd1211rw.ko
    cp /usr/src/linux/net/ieee80211/*.ko /lib/modules/`uname -r`/kernel/net/ieee80211/
    cp /usr/src/linux/net/ieee80211/softmac/*.ko /lib/modules/`uname -r`/kernel/net/ieee80211/softmac/

    depmod -ae

    --------------------------------------------------------------------------
    but this comand:

    cp /usr/src/linux/drivers/net/wireless/zd1211rw/zd1211rw.ko /lib/modules/`uname -r`/kernel/drivers/net/wireless/zd1211rw/zd1211rw.ko

    does not find the file zd1211rw.ko

    someone knows solve this problem?

  2. #2
    Member
    Join Date
    Jun 2007
    Posts
    218

    Default

    Use BT3final. It works fine, no patching necessary.

  3. #3
    Junior Member LordIfrit's Avatar
    Join Date
    Mar 2008
    Posts
    31

    Default

    Thank you council,
    but already I tried to start BT3Final on my Aspire7720G encountered problems with blocking the graphics card when I solved by installing BT2Final

  4. #4
    Member
    Join Date
    Jun 2007
    Posts
    218

    Default

    Did you try the 'VESA KDE' boot option?

  5. #5
    Junior Member LordIfrit's Avatar
    Join Date
    Mar 2008
    Posts
    31

    Default

    Quote Originally Posted by level View Post
    Did you try the 'VESA KDE' boot option?
    Yes i tried to start BT3Final in any mode and I have surrendered

  6. #6
    Member
    Join Date
    Jun 2007
    Posts
    218

    Default

    In BT2final the *.ko files are located in:

    /lib/modules/2.6.20-BT-PwnSauce-NOSMP/kernel/drivers/net/wireless

    Try changing your tutorial steps

  7. #7
    Junior Member LordIfrit's Avatar
    Join Date
    Mar 2008
    Posts
    31

    Default

    Quote Originally Posted by level View Post
    In BT2final the *.ko files are located in:

    /lib/modules/2.6.20-BT-PwnSauce-NOSMP/kernel/drivers/net/wireless

    Try changing your tutorial steps
    I tried but it does not work

  8. #8
    Member
    Join Date
    Jun 2007
    Posts
    218

    Default

    Do your patches work? BT2 has the 2.6.20 kernel.

    Do you get any error messages from dmesg?

    Some more information would be helpful, such as the commands that you are using.

  9. #9
    Junior Member LordIfrit's Avatar
    Join Date
    Mar 2008
    Posts
    31

    Default

    no error message in dmesg:

    Initializing USB Mass Storage driver...
    scsi4 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 2
    scsi 4:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
    SCSI device sdb: 8060928 512-byte hdwr sectors (4127 MB)
    sdb: Write Protect is off
    sdb: Mode Sense: 23 00 00 00
    sdb: assuming drive cache: write through
    SCSI device sdb: 8060928 512-byte hdwr sectors (4127 MB)
    sdb: Write Protect is off
    sdb: Mode Sense: 23 00 00 00
    sdb: assuming drive cache: write through
    sdb: sdb1 sdb2 sdb3 sdb4
    sd 4:0:0:0: Attached scsi removable disk sdb
    usb-storage: device scan complete
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
    Unable to load NLS charset utf8
    UDF-fs: No partition found (1)
    XFS: bad magic number
    XFS: SB validate failed
    Unable to load NLS charset utf8
    NTFS volume version 3.1.
    Unable to load NLS charset utf8
    NTFS volume version 3.1.
    Unable to load NLS charset utf8
    NTFS volume version 3.1.
    bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 87540 bytes,<6>...found (1024x768, 87432 bytes, v3).
    bootsplash: status on console 0 changed to on
    Adding 1092412k swap on /dev/sdb2. Priority:-1 extents:1 across:1092412k
    ieee1394: Initialized config rom entry `ip1394'
    ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
    ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
    PCI: Setting latency timer of device 0000:07:00.0 to 64
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[97000000-970007ff] Max Packet=[2048] IR/IT contexts=[4/4]
    input: PC Speaker as /class/input/input6
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    ACPI: PCI Interrupt 0000:00:1f.3[b] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1b.0 to 64
    ieee80211_crypt: registered algorithm 'NULL'
    ieee80211: 802.11 data/management/control stack, git-1.1.13
    ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
    ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0dmpr
    ipw3945: Copyright(c) 2003-2006 Intel Corporation
    sdhci: Secure Digital Host Controller Interface driver, 0.12
    sdhci: Copyright(c) Pierre Ossman
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[c741290a00023f79]
    ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:06:00.0 to 64
    ipw3945: Detected Intel PRO/Wireless 3945BG Network Connection
    sd 2:0:0:0: Attached scsi generic sg0 type 0
    sd 4:0:0:0: Attached scsi generic sg1 type 0
    tg3.c:v3.72 (January 8, 2007)
    ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:05:00.0 to 64
    eth0: Tigon3 [partno(BCM95787m) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1b:38:5b:da:7c
    eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
    eth0: dma_rwctrl[76180000] dma_mask[64-bit]
    sdhci: SDHCI controller found at 0000:07:00.1 [1180:0822] (rev 22)
    ACPI: PCI Interrupt 0000:07:00.1[b] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:07:00.1 to 64
    sdhci:slot0: Controller reports > 25 MHz base clock, but no high speed support.
    mmc0: SDHCI at 0x97000b00 irq 11 DMA
    lp: driver loaded but no devices found
    Linux agpgart interface v0.101 (c) Dave Jones
    fuse init (API version 7.8)
    Capability LSM initialized
    input: ImPS/2 Generic Wheel Mouse as /class/input/input7
    NTFS volume version 3.1.
    NTFS volume version 3.1.
    NTFS volume version 3.1.
    Databook TCIC-2 PCMCIA probe: not found.
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    usb 2-5: new high speed USB device using ehci_hcd and address 3
    usb 2-5: configuration #1 chosen from 1 choice
    zd1211rw 2-5:1.0: firmware version 4725
    zd1211rw 2-5:1.0: zd1211b chip 0ace:1215 v4810 high 00-02-72 AL2230_RF pa0 g--N
    zd1211rw 2-5:1.0: eth1
    usbcore: registered new interface driver zd1211rw
    ADDRCONF(NETDEV_UP): eth1: link is not ready
    device eth1 entered promiscuous mode

  10. #10
    Member
    Join Date
    Jun 2007
    Posts
    218

    Default

    usb 2-5: new high speed USB device using ehci_hcd and address 3
    usb 2-5: configuration #1 chosen from 1 choice
    zd1211rw 2-5:1.0: firmware version 4725
    zd1211rw 2-5:1.0: zd1211b chip 0ace:1215 v4810 high 00-02-72 AL2230_RF pa0 g--N
    zd1211rw 2-5:1.0: eth1
    usbcore: registered new interface driver zd1211rw
    ADDRCONF(NETDEV_UP): eth1: link is not ready
    device eth1 entered promiscuous mode


    You're able to put your card in monitor mode, right. So, I assume you're having problems with injecting. The 1211b chip should be able to do normal injection and the chopchop attack. What commands have you tried so far?

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •