Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: help capturing packets with rtl8187l and airodump

  1. #1
    Just burned his ISO
    Join Date
    Jan 2008
    Posts
    11

    Default help capturing packets with rtl8187l and airodump

    Hi guys can anybody come up with a solution for me ?I have searched the site and google first but cant come up with an answer.I am running the latest beta version of the aircrack suite and i am trying to capture airodump ,packets injected with aireplay .
    The aircrack site states this "Limitations
    Injected Packets are not Captured
    While in monitor mode, airodump-ng will not capture or record any packets injected by the aircrack-ng suite. This is a known problem with the driver.


    Does this mean that i have to use 2 seperate cards ? The rtl8187l for injecting using aireplay and another card running airodump to capture.

    If so this could be a real problem as im using the the card with the rtl8187l on an external antena and would find it very difficult to get a signal from the ap using a standalone card.

    Please excuse me if the question has already been answered just cant get my head around this one.

    Regards Phil.

  2. #2
    Member
    Join Date
    Dec 2007
    Location
    @InterN0T
    Posts
    315

    Default

    Well Phil, first off you might have to patch your driver to get better performance
    (you can find out which driver in some threads here and also on aircracks website :P )

    And yes, in some cases when doing "WiFu Hacking" you might need 2 cards.
    You also need to have a better signal than -1 mate 70-100 would be good imho
    [quote][I]I realized, that I had fallen down from the top of the mountain into a deep, terrifying and dark hole, just to find out that another mountain in front of me, much greater than the previous, was the next step in life. I began to wander uphill on the next mountain of life while I knew it would be much harder than the previous mountain. [/I]- MaXe[/quote]

  3. #3
    Just burned his ISO
    Join Date
    Jan 2008
    Posts
    11

    Default

    Hi thanx for the reply maxe legand, I have done as much research as possible without asking for help the minute i get stuck.
    According to the aircrack site the Latest version: 1.0-beta1 states in changelog "patches: updated rtl8187 patch for 2.6.22" I also have a good signal of 58 using a 2.4GHz outdoor Square Parabolic GRID Antenna and a bosslan bossw203 500 mW (Same as an Alfa AWUS036H ) usb adapter) . And i know that it does say that there are concerns capturing data with airodump whilst injecting packets.I have checked injection is working but packets do not increase (in fact there are no packets at all) I did forget to mention that there is no station associated with the AP This may or may not have an effect ,Any thought on this at all?
    If you need me to i can describe a step by step description of how i am attempting the attack,But cutting it briefly i am using airodump

    iwconfig wlan0 channel 3

    Airodump-ng --ivs --channel 3 --write firsthack wlan0

    Then in a new console aireplay-ng using attack -3
    aireplay-ng -3 -e (SSID) wlan0

    Then in a new console using aireplay-ng running attack 1 and 0 together
    aireplay-ng -1 0 -e (SSID) wlan0

    But still no packets I Think that i may be doing something wrong here that is probably very simple for one of you guys to see straight away but i am having Great difficulties and any help would be greatly apreciated .

    Regards phil.

  4. #4
    Senior Member
    Join Date
    Apr 2007
    Posts
    3,385

    Default

    Quote Originally Posted by roadrash View Post

    Airodump-ng --ivs --channel 3 --write firsthack wlan0

    Then in a new console aireplay-ng using attack -3
    aireplay-ng -3 -e (SSID) wlan0

    Then in a new console using aireplay-ng running attack 1 and 0 together
    aireplay-ng -1 0 -e (SSID) wlan0

    Theres the problem...a couple in fact.


    First off...don't use the --ivs switch anymore. And your airodump command line should look like this>>>

    Code:
    airodump-ng -c CHANNELofAPhere -w FILEnameHERE --bssid APmacHERE ath0
    Second, you need to use

    Code:
    aireplay-ng -1 0 -a APmacHERE -h YOURcardsMAChere ath0
    before you run your

    aireplay-ng -3 -e (SSID) wlan0

    .................^^^
    and even thats wrong!! Should be
    Code:
    aireplay-ng -3 -b APmacHERE -h YOURcardsMAChere ath0
    Here...do yourself a favor, and click on the first link in my signature and follow my video, and all your problems will probably go away.


    PS..replace my ath0 with your wlan0 if your using the rtl8187L chipset.
    [CENTER][FONT=Book Antiqua][SIZE=5][B][COLOR=blue][FONT=Courier New][COLOR=red]--=[/COLOR][/FONT]Xploitz[FONT=Courier New][COLOR=red]=--[/COLOR][/FONT][/COLOR][/B][/SIZE][/FONT][FONT=Courier New][COLOR=Black][SIZE=6][B] ®[/B][/SIZE][/COLOR][/FONT][/CENTER]
    [CENTER][SIZE=4][B]Remote-Exploit.orgs Master Tutorialist.[/B][/SIZE][SIZE=6][B]™
    [/B][/SIZE]
    [URL="http://forums.remote-exploit.org/showthread.php?t=9063"][B]VIDEO: Volume #1 "E-Z No Client WEP Cracking Tutorial"[/B]
    [/URL]
    [URL="http://forums.remote-exploit.org/showthread.php?t=7872"][B]VIDEO: Volume #2 "E-Z No Client Korek Chopchop Attack Tutorial"[/B]
    [/URL]
    [URL="http://forums.remote-exploit.org/showthread.php?t=8230"][B]VIDEO: Volume #3 "E-Z WPA/WPA2 Cracking Tutorial"[/B][/URL]

    [URL="http://forums.remote-exploit.org/showthread.php?t=8041"][B]VIDEO: Volume #4 "E-Z Cracking WPA/WPA2 With Airolib-ng Databases"[/B][/URL]
    [/CENTER]

  5. #5
    Just burned his ISO
    Join Date
    Jan 2008
    Posts
    11

    Default

    Xploitz thankyou very much i will give that a go and let you know the outcome
    Again thankyou very much.
    Regards Phil.

  6. #6
    Senior Member
    Join Date
    Apr 2007
    Posts
    3,385

    Default

    Quote Originally Posted by roadrash View Post
    Xploitz thankyou very much i will give that a go and let you know the outcome
    Again thankyou very much.
    Regards Phil.
    Anytime roadrash.
    [CENTER][FONT=Book Antiqua][SIZE=5][B][COLOR=blue][FONT=Courier New][COLOR=red]--=[/COLOR][/FONT]Xploitz[FONT=Courier New][COLOR=red]=--[/COLOR][/FONT][/COLOR][/B][/SIZE][/FONT][FONT=Courier New][COLOR=Black][SIZE=6][B] ®[/B][/SIZE][/COLOR][/FONT][/CENTER]
    [CENTER][SIZE=4][B]Remote-Exploit.orgs Master Tutorialist.[/B][/SIZE][SIZE=6][B]™
    [/B][/SIZE]
    [URL="http://forums.remote-exploit.org/showthread.php?t=9063"][B]VIDEO: Volume #1 "E-Z No Client WEP Cracking Tutorial"[/B]
    [/URL]
    [URL="http://forums.remote-exploit.org/showthread.php?t=7872"][B]VIDEO: Volume #2 "E-Z No Client Korek Chopchop Attack Tutorial"[/B]
    [/URL]
    [URL="http://forums.remote-exploit.org/showthread.php?t=8230"][B]VIDEO: Volume #3 "E-Z WPA/WPA2 Cracking Tutorial"[/B][/URL]

    [URL="http://forums.remote-exploit.org/showthread.php?t=8041"][B]VIDEO: Volume #4 "E-Z Cracking WPA/WPA2 With Airolib-ng Databases"[/B][/URL]
    [/CENTER]

  7. #7
    Just burned his ISO
    Join Date
    Jan 2008
    Posts
    11

    Default

    Sorry to be a royal pain but i cant see the video on your link searched the whole post
    Sorry
    Regards Phil

  8. #8
    Senior Member
    Join Date
    Apr 2007
    Posts
    3,385

    Default

    Quote Originally Posted by roadrash View Post
    Sorry to be a royal pain but i cant see the video on your link searched the whole post
    Sorry
    Regards Phil
    Their all in the first post I made. Usually at the bottom of the post.
    Your like the 3rd person who has said that to me. Can anybody else see the photobucket links to my videos in my video threads??
    [CENTER][FONT=Book Antiqua][SIZE=5][B][COLOR=blue][FONT=Courier New][COLOR=red]--=[/COLOR][/FONT]Xploitz[FONT=Courier New][COLOR=red]=--[/COLOR][/FONT][/COLOR][/B][/SIZE][/FONT][FONT=Courier New][COLOR=Black][SIZE=6][B] ®[/B][/SIZE][/COLOR][/FONT][/CENTER]
    [CENTER][SIZE=4][B]Remote-Exploit.orgs Master Tutorialist.[/B][/SIZE][SIZE=6][B]™
    [/B][/SIZE]
    [URL="http://forums.remote-exploit.org/showthread.php?t=9063"][B]VIDEO: Volume #1 "E-Z No Client WEP Cracking Tutorial"[/B]
    [/URL]
    [URL="http://forums.remote-exploit.org/showthread.php?t=7872"][B]VIDEO: Volume #2 "E-Z No Client Korek Chopchop Attack Tutorial"[/B]
    [/URL]
    [URL="http://forums.remote-exploit.org/showthread.php?t=8230"][B]VIDEO: Volume #3 "E-Z WPA/WPA2 Cracking Tutorial"[/B][/URL]

    [URL="http://forums.remote-exploit.org/showthread.php?t=8041"][B]VIDEO: Volume #4 "E-Z Cracking WPA/WPA2 With Airolib-ng Databases"[/B][/URL]
    [/CENTER]

  9. #9
    Just burned his ISO
    Join Date
    Jan 2008
    Posts
    11

    Default

    Oh deer i am a noob arn't i ,Got it In fact got it just before i checked back here To see if i could edit the post.
    Thanks again and again
    Regards Phil.

  10. #10
    Member s1lang's Avatar
    Join Date
    Sep 2007
    Posts
    189

    Default

    @ -=Xploitz=-

    I can see the links mate in your video threads

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •