Page 3 of 5 FirstFirst 12345 LastLast
Results 21 to 30 of 46

Thread: Installing BT3 on the eee 901 with drivers, part I

  1. #21
    Just burned his ISO
    Join Date
    Sep 2008
    Posts
    13

    Default

    Quote Originally Posted by hippocrates View Post


    Now at this point you should really read README_STA, and definitely read iwpriv_usage.txt. These drivers are a bit unusual, in that many of the normal iwconfig commands don’t work, and you need to give iwpriv commands in specific orders in order to get the network to come up properly. You can also use a configuration file if your wireless configuration does not change much. I did not need to change anything in the makefile.

    Run the following:



    You should see a shiny new ra0 wireless interface listed along with your loopback. Some useful commands:

    When I type 'make' I get this:

    arch.kimag.es/share/85102260.jpg

    Got any ideas?

  2. #22
    Junior Member
    Join Date
    Jun 2008
    Posts
    46

    Default xorg.conf

    hippocrates: Thanks for your guide and efforts


    I went ahead and did it the hard way, since I want to keep my sound and LAN drivers working. Everything seemed fine except for the xorg.conf file, I think its either missing
    some stuff or its just did not want to work on my eeePC.

    For example, after Section "InputDevice"
    and before Section "Device", I think that its missing EndSection.


    Anyhow, I will post the xorg.conf which I edited using your own version and what was originally there. So this is the result which works fine on mine:



    # ************************************************** ********************
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    # ************************************************** ********************
    #
    Section "Module"

    Load "dbe" # Double buffer extension

    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection

    Load "type1"
    Load "freetype"
    Load "glx"
    Load "dri"
    Load "extmod"
    Load "synaptics"

    EndSection


    Section "Files"

    RgbPath "/usr/X11R6/lib/X11/rgb"

    FontPath "/usr/X11R6/lib/X11/fonts/local/"
    FontPath "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath "/usr/X11R6/lib/X11/fonts/CID/"
    FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
    FontPath "/usr/X11R6/lib/X11/fonts/cyrillic/"

    EndSection

    Section "ServerFlags"

    Option "AIGLX" "false"
    # Option "Xinerama" "true"

    EndSection

    Section "DRI"
    Mode 0666
    EndSection

    Section "Extensions"
    Option "Composite" "Enable"
    EndSection


    Section "InputDevice"
    Identifier "Keyboard1"
    Driver "kbd"
    EndSection


    Section "InputDevice"

    Identifier "Mouse1"
    Driver "mouse"
    Option "ZAxisMapping" "4 5"
    Option "Buttons" "3"
    Option "Protocol" "IMPS/2"
    Option "Device" "/dev/mouse"
    EndSection


    Section "InputDevice"
    Identifier "Synaptics Touchpad"
    Driver "synaptics"
    Option "Device" "/dev/psaux"
    Option "Protocol" "auto-dev"
    Option "LeftEdge" "1400"
    Option "RightEdge" "5900"
    Option "TopEdge" "1400"
    Option "BottomEdge" "4500"
    Option "PalmDetect" "0"
    Option "SHMConfig" "true"
    Option "SendCoreEvents" "yes"
    Option "HorizScrollDelta" "0"
    Option "VertScrollDelta" "155"
    Option "RBCornerButton" "0"
    Option "RTCornerButton" "0"
    Option "TapButton2" "0"
    Option "MinSpeed" "0.095"
    Option "MaxSpeed" "0.38"
    Option "VertTwoFingerScroll" "1"
    Option "VertEdgeScroll" "0"
    Option "HorizEdgeScroll" "0"EndSection
    EndSection


    Section "Monitor"

    Identifier "Monitor0"
    Option "DPMS"
    VendorName "ASUS"
    ModelName "eeePC P901"

    EndSection


    Section "Monitor"

    Identifier "Monitor1"
    Option "DPMS"

    EndSection


    Section "Device"
    Identifier "Intel_IEGD-0"
    Driver "iegd"
    VendorName "Intel(R) DEG"
    BoardName "Embedded Graphics"
    BusID "0:2:0"
    Screen 0
    Option "PcfVersion" "1792"
    Option "ConfigId" "1"
    Option "ALL/1/name" "945GME_1200x600"
    Option "ALL/1/General/PortOrder" "40000"
    Option "ALL/1/General/DisplayConfig" "1"
    Option "ALL/1/General/DisplayDetect" "0"
    Option "ALL/1/General/DRI" "1"
    Option "ALL/1/Port/4/General/name" "901Screen"
    Option "ALL/1/Port/4/General/EdidAvail" "4"
    Option "ALL/1/Port/4/General/EdidNotAvail" "4"
    Option "ALL/1/Port/4/General/Rotation" "0"
    Option "ALL/1/Port/4/General/Edid" "1"
    Option "ALL/1/Port/4/FpInfo/BkltMethod" "0"
    Option "ALL/1/Port/4/Dtd/1/PixelClock" "48959"
    Option "ALL/1/Port/4/Dtd/1/HorzActive" "1024"
    Option "ALL/1/Port/4/Dtd/1/HorzSync" "40"
    Option "ALL/1/Port/4/Dtd/1/HorzSyncPulse" "144"
    Option "ALL/1/Port/4/Dtd/1/HorzBlank" "288"
    Option "ALL/1/Port/4/Dtd/1/VertActive" "600"
    Option "ALL/1/Port/4/Dtd/1/VertSync" "1"
    Option "ALL/1/Port/4/Dtd/1/VertSyncPulse" "4"
    Option "ALL/1/Port/4/Dtd/1/VertBlank" "22"
    Option "ALL/1/Port/4/Dtd/1/Flags" "0x20000"
    Option "ALL/1/Port/4/Dtd/2/PixelClock" "29579"
    Option "ALL/1/Port/4/Dtd/2/HorzActive" "800"
    Option "ALL/1/Port/4/Dtd/2/HorzSync" "16"
    Option "ALL/1/Port/4/Dtd/2/HorzSyncPulse" "96"
    Option "ALL/1/Port/4/Dtd/2/HorzBlank" "192"
    Option "ALL/1/Port/4/Dtd/2/VertActive" "480"
    Option "ALL/1/Port/4/Dtd/2/VertSync" "1"
    Option "ALL/1/Port/4/Dtd/2/VertSyncPulse" "4"
    Option "ALL/1/Port/4/Dtd/2/VertBlank" "17"
    Option "ALL/1/Port/4/Dtd/2/Flags" "0x0"
    Option "ALL/1/Port/4/Attr/27" "0"
    Option "ALL/1/Port/4/Attr/26" "18"
    Option "PortDrivers" "lvds"
    EndSection


    # Secondary (for dual-head only) display
    Section "Device"
    Identifier "Intel_IEGD-1"
    Driver "iegd"
    VendorName "Intel(R) DEG"
    BoardName "Embedded Graphics"
    BusID "0:2:0"
    Screen 1
    Option "PcfVersion" "1792"
    Option "ConfigId" "1"
    Option "ALL/1/name" "945GME_1200x600"
    Option "ALL/1/General/PortOrder" "45000"
    Option "ALL/1/General/DisplayConfig" "8"
    Option "ALL/1/General/DisplayDetect" "1"
    Option "ALL/1/General/DRI" "1"
    EndSection


    Section "Screen"
    Identifier "Screen0"
    Device "Intel_IEGD-0"
    Monitor "Monitor0"
    DefaultDepth 24
    Subsection "Display"
    Depth 24
    Modes "1024x600" "800x600"
    ViewPort 0 0
    # Virtual 1600 1200
    EndSubsection
    EndSection

    Section "Screen"
    Identifier "Screen1"
    Device "Intel_IEGD-1"
    Monitor "Monitor1"
    SubSection "Display"
    EndSubSection
    EndSection


    Section "ServerLayout"
    Identifier "Default Layout"
    Screen 0 "Screen0" 0 0
    Screen 1 "Screen1" RightOf "Screen0"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
    InputDevice "Synaptics Touchpad"
    EndSection

  3. #23
    Junior Member
    Join Date
    Jun 2008
    Posts
    46

    Default Desktop icons

    For the Desktop icons, I changed their size to be a bit smaller, it looks much nicer, and its very simple to do:
    Go to K --> System --> Settings --> Control Center --> Appearance & Themes --> Icons --> Advanced tab --> I put mine on 32

  4. #24
    Just burned his ISO
    Join Date
    Sep 2008
    Posts
    20

    Default

    Hi there,

    I have been trying repeatedly to get this working over the weekend. I am new to alot of this so my knowledge of this subject isnt to great at this time.

    I really feel at a lost end now though. I believe I have tried everything to get it to work...

    I am trying to get the SD card to boot live, just like if you stuck a BT3 CD into your pc and booted from it...

    Heres what I've done so far...

    From the top:

    1 - I downloaded the BT3 Final USB ISO

    2 - Extracted the 2 folders (boot and BT3)

    3 - Added the 901_net_gfx.lzm to BT3/optional

    4* - Added 'load=901_net_gfx' to the syslinux.cfg in boot/syslinux (I added it to the end of the APPEND line of the section labelled 'STARTX' - is this right?)

    5 - Followed this tut on how to make the SD card bootable:

    ---> http://www.youtube.com/watch?v=6-ebwvv2VkY

    6. With the eeepc 901 off, I insert the card and switch it on. I tap esc until the little boot menu appears and select the card.

    7. It appears to boot normally - I get the splash screen where its says press tab with a 3 second countdown etc...

    8. It autoboots after 3 seconds, then it does the 'loading /boot/vmware' bit with all the white dots.

    9. It then immediatly says (under the first loading text above) ''you passed an undefined mode number press return to see video modes or wait 30 secs...''

    10. I wait 30 seconds and it continues to load everything.

    11. Then it says 'welcome to backtrack 3 final' - ''the system is up and running now'

    12. I log in with root / toor and it just gives me the 'bt ~#' bash prompt.

    13. I type 'startx' (without the speech marks) and the screen goes black briefly.

    14. Then I am presented with a screen full of text. The important stuff being:

    ''(==) Using config file: "/etc/X11/xorg.comf"
    (WW) intel: No matching device section for instance (busID PCI:0:2:1) found
    (II) Module already built in
    (II) Module already built in
    (II) Module already built in
    (EE) GARTinit: Unable to open /dev/agpgart (No such file or directory)
    (EE) intel(0): Couldnt allocate video memory

    Fatal server error:
    AddScreen/Screeninit failed for driver 0

    giving up
    xinit: connection reset by peer (errno 104): unable to connect to X server
    xinit: No such process (errno3): server error''

    This is as far as I can get. Its really annoying me as I feel so close but yet so far...

    If someone could be amazing enough to point me in the right direction or tell me what it is that I'm doing wrong I would be most pleased.

    note: I did run airodump-ng from the bash prompt and that seemed to work but the SSIDs were cut off the screen though.

    * - I am a little confused about step 4. I have read the tutorials you suggest but I cant link that info to what I'm trying to acheive.

    Hippocrates, you suggested to another user:

    APPEND vga=785 initrd=/boot/initrd.gz ramdisk_size=6666 root=/dev/ram0 rw load=901_net_gfx

    I have tried this exactly as you typed it in my syslinux.cfg with no joy.

    I dont understand what 'vga=0x317' means either and why you change it in your given text to 'vga=785'

    I feel I am so close now. Any help will be very greatfully received.

    Thanks in advance,

    Ben.
    Its just a hobby that I picked up in the lobby...

  5. #25
    Just burned his ISO
    Join Date
    Sep 2008
    Posts
    20

    Default

    I got this video on Youtube...

    http://www.youtube.com/watch?v=r2RFoseeQ-8

    It dosent include any extra modules or anything complicated but you can get the basics working enough to pentest wep and wpa networks!

    Sweet.
    Its just a hobby that I picked up in the lobby...

  6. #26
    Just burned his ISO dynamix's Avatar
    Join Date
    Feb 2008
    Posts
    9

    Default

    hippocrates, thank you for your guide.

    i am stuck installing the IEGD drivers. I made an installation package for it (i didn't specify DTD as i assume this was part of the config) but don't know how to install it from there?

    your help is much appreciated

  7. #27
    Junior Member
    Join Date
    Jul 2008
    Posts
    26

    Default

    @FarmerB

    Hi there - sorry, been absent from the forums for a while. Check out post #16 in this thread for an example of the line in syslinux.cfg you need to use. I also recommend reading Vladsmail's tutorials on BT3 modularity - it explains how to use modules in general in great detail...

    You can't get injection working with the 901's internal card yet as far as I know, but I purchased an Alfa USB wireless card and everything works fine with that.

  8. #28
    Junior Member
    Join Date
    Jul 2008
    Posts
    26

    Default

    @BT3User

    Thanks for the tip on the desktop icons. I'm glad you managed to get things working the hard way - there may well be a copy / paste error in the xorg.conf, and I'll check it out when I get a chance. Installing the graphics drivers was a real pain, and I'm still waiting for Intel to put out a version where DRI actually works...

  9. #29
    Junior Member
    Join Date
    Jul 2008
    Posts
    26

    Default

    @FarmerB

    The errors you are getting indicate that first you don't have the right VGA mode specified in your syslinux.cfg file, and the agpgart bit means you don't have the graphics drivers installed, which probably means you are not loading my module correctly.

    When BT3 is booting you should see the various standard modules being loaded, and then at the end you should see my custom module there too. If you don't see that then it is not picking it up somehow. I know the module works since I have used it on several clean installs, as have other people, so it's just a matter of getting the boot process right... I'll post my current syslinux config when I get the chance.

  10. #30
    Just burned his ISO
    Join Date
    Apr 2006
    Posts
    3

    Default

    Hi,

    I followed your guide and I see the interface, and I can set it into monitor mode, both by using airmon-ng and manually "iwconfig ra0 mode monitor" but airodump-ng doesn't seem to want to capture any packets or even see any of the interfaces. I've read on the internet that the drivers are a little flaky, is it true or could I possibly be doing smth wrong?

Page 3 of 5 FirstFirst 12345 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •