Injection on zd1211rw

[slowz3r]

Is there a working parch for this? I tried the one from aircrack-ng.org but it had issues installing.

So any other fix?

[imported_=Tron=]

Is there a working parch for this? I tried the one from aircrack-ng.org but it had issues installing.

So any other fix?

If the patch was found at aircrack-ng.org it is probably your best bet. What kind of issues where you having installing it?

[slowz3r]

I would just get the eqivilent to an installation failed..

Ill post exactly what i get a little later

[slowz3r]

patch -Np1 --verbose --dry-run -i zd1211rw_inject_2.6.24.4.patch

Hmm... Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|# For kernels 2.6.24.x only. Applying ieee80211 patch is required too. Some distros may require the 2.6.25.x version of the patch
|# Features: sets monitor mode properly, discards invalid frames, ...
|diff -pur linux-2.6.24.4-zd1211rw/drivers/net/wireless/zd1211rw/zd_mac.c linux-2.6.24.4-sud/drivers/net/wireless/zd1211rw/zd_mac.c
|--- linux-2.6.24.4-zd1211rw/drivers/net/wireless/zd1211rw/zd_mac.c 2008-01-24 23:58:37.000000000 +0100
|+++ linux-2.6.24.4-sud/drivers/net/wireless/zd1211rw/zd_mac.c 2008-04-12 21:21:59.000000000 +0200
--------------------------
Patching file drivers/net/wireless/zd1211rw/zd_mac.c using Plan A...
Reversed (or previously applied) patch detected! Skipping patch.
Hunk #1 ignored at 156.
Hunk #2 ignored at 238.
Hunk #3 ignored at 776.
Hunk #4 ignored at 798.
Hunk #5 ignored at 812.
Hunk #6 ignored at 853.
Hunk #7 ignored at 877.
Hunk #8 ignored at 936.
Hunk #9 ignored at 960.
Hunk #10 ignored at 975.
Hunk #11 ignored at 991.
Hunk #12 ignored at 1101.
12 out of 12 hunks ignored -- saving rejects to file drivers/net/wireless/zd1211rw/zd_mac.c.rej
Hmm... The next patch looks like a unified diff to me...
The text leading up to this was:
--------------------------
|diff -pur linux-2.6.24.4-zd1211rw/drivers/net/wireless/zd1211rw/zd_usb.c linux-2.6.24.4-sud/drivers/net/wireless/zd1211rw/zd_usb.c
|--- linux-2.6.24.4-zd1211rw/drivers/net/wireless/zd1211rw/zd_usb.c 2008-01-24 23:58:37.000000000 +0100
|+++ linux-2.6.24.4-sud/drivers/net/wireless/zd1211rw/zd_usb.c 2008-04-12 19:48:06.000000000 +0200
--------------------------
Patching file drivers/net/wireless/zd1211rw/zd_usb.c using Plan A...
Reversed (or previously applied) patch detected! Skipping patch.
Hunk #1 ignored at 774.
1 out of 1 hunk ignored -- saving rejects to file drivers/net/wireless/zd1211rw/zd_usb.c.rej
Hmm... The next patch looks like a unified diff to me...
The text leading up to this was:
--------------------------
|diff -pur linux-2.6.24.4-zd1211rw/drivers/net/wireless/zd1211rw/zd_usb.h linux-2.6.24.4-sud/drivers/net/wireless/zd1211rw/zd_usb.h
|--- linux-2.6.24.4-zd1211rw/drivers/net/wireless/zd1211rw/zd_usb.h 2008-01-24 23:58:37.000000000 +0100
|+++ linux-2.6.24.4-sud/drivers/net/wireless/zd1211rw/zd_usb.h 2008-04-12 19:48:06.000000000 +0200
--------------------------
Patching file drivers/net/wireless/zd1211rw/zd_usb.h using Plan A...
Reversed (or previously applied) patch detected! Skipping patch.
Hunk #1 ignored at 221.
1 out of 1 hunk ignored -- saving rejects to file drivers/net/wireless/zd1211rw/zd_usb.h.rej
done

And when i try the 2.6.25 patch i get this

Hmm... Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|# Enables sniffer and enhances rx error detection
|diff -pur linux-2.6.25-orig/drivers/net/wireless/zd1211rw/zd_mac.c linux-2.6.25/drivers/net/wireless/zd1211rw/zd_mac.c
|--- linux-2.6.25-orig/drivers/net/wireless/zd1211rw/zd_mac.c 2008-04-17 04:49:44.000000000 +0200
|+++ linux-2.6.25/drivers/net/wireless/zd1211rw/zd_mac.c 2008-05-04 23:06:22.000000000 +0200
--------------------------
Patching file drivers/net/wireless/zd1211rw/zd_mac.c using Plan A...
Hunk #1 FAILED at 174.
Hunk #2 FAILED at 655.
2 out of 2 hunks FAILED -- saving rejects to file drivers/net/wireless/zd1211rw/zd_mac.c.rej
done

[imported_=Tron=]

Alright, your problems seem to be related to the fact that BT3 runs on kernel version 2.6.21.5 and the patch assumes version 2.6.24 by default. I checked out the aircrack-ng homepage and it does look like it is possible to install it with older kernel versions as well, but that some tweaking will be required depending on the specific distribution and kernel version.

The page also gives the following information, which would indicate that actually updating the kernel to at least version 2.6.25 would be the best way to go:

...Bottom line, the Zydas chipset is only recommended for use with the aircrack-ng suite if you have a fairly-recent kernel (2.6.25 or newer), due to the large number of problems with it. There are simply too many problems associated with the driver and the specific wireless devices. (Most of these problems are fixed by the mac80211-based driver in kernels 2.6.25 and up.)

The zd1211rw driver has been incorporated into the latest kernels. So you will have to patch the kernel source to obtain injection support. This is described below in detail.

[slowz3r]

Alright, your problems seem to be related to the fact that BT3 runs on kernel version 2.6.21.5 and the patch assumes version 2.6.24 by default. I checked out the aircrack-ng homepage and it does look like it is possible to install it with older kernel versions as well, but that some tweaking will be required depending on the specific distribution and kernel version.

The page also gives the following information, which would indicate that actually updating the kernel to at least version 2.6.25 would be the best way to go:

Alright, i was hoping i wouldnt need to do that. Im only trying to do this now because my wusb54g v.4 errors when i try to start it with airmon-ng

get some damn forcedprism error crap, it worked fine before so i dont know

thanks for your suggestion