Results 1 to 4 of 4

Thread: B|T3 Final_USB - Question on DVD converting/Unable to recover TOC

  1. #1
    Member The_Denv's Avatar
    Join Date
    Nov 2006
    Posts
    364

    Default B|T3 Final_USB - Question on DVD converting/Unable to recover TOC

    Greetings,

    I am questioning the following file:
    Code:
    Description: USB Version (Extended)
    Name:: bt3final_usb.iso
    Size: 784 MB
    MD5: 5d27c768e9c2fef61bbc208c78dadf22
    SHA1: 3aceedea0e8e70fff2e7f7a7f3039704014e980f
    Now I know its the USB version, but just like every other USB version; I burn them onto a DVD. I am using 'Nero Burning ROM 7" to burn the ISO file onto a blank DVD. I used this method for every other version of B|T and it worked, although this time it did not work. The DVD keeps getting spat out from my drive and I am prompted with the 'Unable to recover TOC'. The solution is usually making sure DMA is on, and it is - Still getting the error.

    Here is my Nero Error Log: [Nero support sucks, thought you guys could help me out or maybe your getting the same error, Got to go out for a few hours, have not been able to troubleshoot everything just yet; any help is appreciated]

    Code:
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32 
    
    NT-SPTI used
    Nero Version: 7.0.0.0
    Recorder:             <MATSHITA DVD-RAM UJ-850S>Version: 1.10 - HA 1 TA 0 - 7.0.0.0
     Adapter driver:      <IDE>                     HA 1
     Drive buffer  :      2048kB
     Bus Type      :      via Inquiry data (1) -> ATAPI, detected: ?
     Connected to MMC as unknown drive with class-nr : 1
     Drive is autodetected - recorder class: 
    CD-ROM:               <MATSHITA DVD-RAM UJ-850S >Version: 1.10 - HA 1 TA 0 - 7.0.0.0
     Adapter driver:      <IDE>                     HA 1
    
    === Scsi-Device-Map ===
    DiskPeripheral       : TOSHIBA MK6037GSX                atapi Port 0 ID 0  DMA: On 
    CdRomPeripheral      : MATSHITA DVD-RAM UJ-850S         atapi Port 2 ID 0  DMA: On 
    
    === CDRom-Device-Map ===
    MATSHITA DVD-RAM UJ-850S   D:   CDRom0
    =======================
    
    AutoRun : 1
    Excluded drive IDs: 
    WriteBufferSize: 66060288 (0) Byte
    ShowDrvBufStat : 0
    BUFE           : 0
    Physical memory     : 446MB (456808kB)
    Free physical memory: 128MB (131784kB)
    Memory in use       : 71 %
    Uncached PFiles: 0x0
    Use Inquiry    : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0) 
    
    20.6.2008
    Burn DVD Image
    20:41:28	#1 Text 0 File ThreadedTransfer.cpp, Line 525
    	ReadBuffer-Pipe got 64512KB of Memory
    	
    20:41:28	#2 Text 0 File Reader.cpp, Line 124
    	Reader running
    	
    20:41:28	#3 Text 0 File Burncd.cpp, Line 3301
    	Turn on Disc-At-Once, using DVD media
    	
    20:41:29	#4 Text 0 File DlgWaitCD.cpp, Line 277
    	Last possible write address on media:  2298495 (510:46.45, 4489MB)
    	Last address to be written:             401264 ( 89:10.14,  783MB)
    	
    20:41:29	#5 Text 0 File DlgWaitCD.cpp, Line 289
    	Write in overburning mode: NO (enabled: CD)
    	
    20:41:29	#6 Text 0 File DlgWaitCD.cpp, Line 2568
    	Recorder: MATSHITA DVD-RAM UJ-850S, Media type: DVD-R
    	 Disc Manufacturer: CMC MA - G. AM3
    	 Disc Application Code: 64, Disc Physical Code: 193
    	
    20:41:29	#7 Text 0 File DlgWaitCD.cpp, Line 456
    	>>> Protocol of DlgWaitCD activities: <<<
    	=========================================
    	
    20:41:29	#8 Text 0 File ThreadedTransferInterface.cpp, Line 846
    	Setup items (after recorder preparation)
    	 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
    	    2 indices, index0 (150) not provided
    	    original disc pos #0 + 401265 (401265) = #401265/89:10.15
    	    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 401265 blocks [D: MATSHITA DVD-RAM UJ-850S]
    	--------------------------------------------------------------
    	
    20:41:29	#9 Text 0 File ThreadedTransferInterface.cpp, Line 1058
    	Prepare recorder [D: MATSHITA DVD-RAM UJ-850S] for write in CUE-sheet-DAO
    	DAO infos:
    	==========
    	 MCN: ""
    	 TOCType: 0x00; Session Closed, disc not fixated
    	 Tracks 1 to 1:
    	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0     821790720, ISRC ""
    	DAO layout:
    	===========
    	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    	       0 |  lead-in |   0 |    0x41 | 0x00
    	       0 |        1 |   0 |    0x41 | 0x00
    	       0 |        1 |   1 |    0x41 | 0x00
    	  401265 | lead-out |   1 |    0x41 | 0x00
    	
    20:41:29	#10 Text 0 File SCSIPassThrough.cpp, Line 34
    	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
    	
    20:41:29	#11 Phase 24 File dlgbrnst.cpp, Line 1724
    	Caching of files started
    	
    20:41:29	#12 Text 0 File Burncd.cpp, Line 4129
    	Cache writing successful.
    	
    20:41:29	#13 Phase 25 File dlgbrnst.cpp, Line 1724
    	Caching of files completed
    	
    20:41:29	#14 Phase 36 File dlgbrnst.cpp, Line 1724
    	Burn process started at 4x (5,540 KB/s)
    	
    20:41:29	#15 Text 0 File ThreadedTransferInterface.cpp, Line 2669
    	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
    	
    20:41:29	#16 Text 0 File DVDR.cpp, Line 2469
    	Recording mode: Sequential Recording Mode for Multisession
    	
    20:41:29	#17 Text 0 File MMC.cpp, Line 21541
    	Set BUFE: Buffer underrun protection -> ON 
    	
    20:41:29	#18 Text 0 File DVDR.cpp, Line 2624
    	Start write address at LBA 0
    	DVD high compatibility mode: Yes
    	
    20:41:29	#19 Text 0 File Cdrdrv.cpp, Line 8385
    	---- DVD Structure: Physical Format Information (00h) ----
    	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    	 Book Type: DVD-R   (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
    	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
    	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
    	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    	 End Physical Sector Number of Data Area:      30000 h
    	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
    	 Data in Burst Cutting Area (BCA) does not exist
    	  Start sector number of the current Border-Out: 0 h
    	  Start sector number of the next Border-In:     0 h
    	 Media Specific [16..63]:
    	      00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00    .`...0@P...!....
    	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
    	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
    	
    20:41:29	#20 SPTI -1122 File SCSIPassThrough.cpp, Line 306
    	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1122)
    	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
    	Sense Code: 0x57
    	Sense Qual: 0x00
    	CDB Data:   0x53 00 00 00 00 00 06 1F 80 00 00 00 
    	Sense Area: 0x70 00 03 00 00 00 00 0A F8 00 00 00 57 
    	
    20:41:29	#21 CDR -1122 File ThreadedTransferInterface.cpp, Line 1783
    	Unable to recover TOC
    	D: MATSHITA DVD-RAM UJ-850S
    	
    20:41:29	#22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1783
    	Could not perform start of Disc-at-once
    	
    20:41:29	#23 Phase 38 File dlgbrnst.cpp, Line 1724
    	Burn process failed at 4x (5,540 KB/s)
    	
    
    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 23/04/2007 01:15:25 
    File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 15/08/2007 23:33:10 (Prassi/Veritas driver for win 2K)
    
    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
    I know its not a direct BT3 bug, but it is related. I hope I do not piss the mods off, kind of in a rush..I will edit when I return. Again, sorry if this is in the wrong section. Thanks again devs for the crack-laced OS [BT]

  2. #2
    Senior Member
    Join Date
    Apr 2008
    Posts
    2,008

    Default

    Have you checked that you have the correct MD5 checksum? I burned the USB iso image onto a DVD-RW without any problems whatsoever using CloneCD.
    -Monkeys are like nature's humans.

  3. #3
    Member The_Denv's Avatar
    Join Date
    Nov 2006
    Posts
    364

    Default

    Quote Originally Posted by =Tron= View Post
    Have you checked that you have the correct MD5 checksum? I burned the USB iso image onto a DVD-RW without any problems whatsoever using CloneCD.
    Yeh the MD5checksum has been verified:
    MD5: 5d27c768e9c2fef61bbc208c78dadf22

    I will download CloneCD and give that a try, thanks Tron
    Also, I Googled for a few hours last night and found that I would need to either update my DVD-RAM firmware, replace the drive altogether or insert a laser cleaner into he drive. Most people on the pages/forums I found on Google more or less stated that if you get the 'Unable to recover TOC' that the drive is dead.

    I will keep trying

  4. #4
    Member The_Denv's Avatar
    Join Date
    Nov 2006
    Posts
    364

    Default -=Solved=-

    I got it working.

    Strangely enough I didn't do anything. I was using Windows to burn the DVD, been using Back|Track 3b constantly and have not loaded Windows since I attempted to burn the image to DVD. 2 hours ago I loaded Windows and tried to burn BT3Final-USB to a DVD once again just to test my luck.

    ...I was in luck! Even though I tried to burn it at x1 speed last time and it didn't work, it worked this time. So, this is not a problem AT ALL with Back|Track and I am sorry for clogging the forum up; but there might be someone with a similar problem

    I have to say that BT3_final is out of this world and I love the fact that SNORT is now apart of it. As time goes on I feel more guilty not being able to donate, that will change as soon as I get my business up and running

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •