Mines works OTB using the LiveCD of BT3 irc pre. Not tested with BT3b nor BT2.
Cheers
Problems with Ubiquity SRX cardbus
I know its been covered before, and supposedly works out of the box with BT3 beta, but im starting to come to the end of my teather with it.
lspci dump:
02:00.0 Ethernet controller: Atheros Communications, Inc. AR5006EG 802.11 b/g Wireless PCI Express Adapter (rev ff)
dmesg dump:
wifi0: ath_chan_set: unable to reset channel 1 (2412 MHz) flags 0xc0 '' (HAL status 4152849348)
wifi0: ath_chan_set: unable to reset channel 6 (2437 MHz) flags 0xc0 '' (HAL status 0)
wifi0: ath_chan_set: unable to reset channel 11 (2462 MHz) flags 0xc0 '' (HAL status 3222374656)
wifi0: ath_chan_set: unable to reset channel 7 (2442 MHz) flags 0xc0 '' (HAL status 0)
Now to recify the problem ive updated madwifi to no avail.
Then went to the manufacturers website, and downloaded thier patch for madwifi, but im still getting the same errors.
dump of modinfo ath_pci
filename: /lib/modules/2.6.21.5/net/ath_pci.ko
license: Dual BSD/GPL
version: svn r2834
description: Support for Atheros 802.11 wireless LAN cards.
author: Errno Consulting, Sam Leffler
srcversion: 13937EB42D00C617A881A20
alias: pci:v0000168Cd00009013sv*sd*bc*sc*i*
alias: pci:v0000168Cd00000024sv*sd*bc*sc*i*
alias: pci:v0000168Cd00000023sv*sd*bc*sc*i*
alias: pci:v0000168Cd0000001Dsv*sd*bc*sc*i*
alias: pci:v0000168Cd0000001Csv*sd*bc*sc*i*
alias: pci:v0000168Cd0000001Bsv*sd*bc*sc*i*
alias: pci:v0000168Cd0000001Asv*sd*bc*sc*i*
alias: pci:v0000168Cd00000019sv*sd*bc*sc*i*
alias: pci:v0000168Cd00000018sv*sd*bc*sc*i*
alias: pci:v0000168Cd00000017sv*sd*bc*sc*i*
alias: pci:v0000168Cd00000016sv*sd*bc*sc*i*
alias: pci:v0000168Cd00000015sv*sd*bc*sc*i*
alias: pci:v0000168Cd0000101Asv*sd*bc*sc*i*
alias: pci:v0000168Cd00001014sv*sd*bc*sc*i*
alias: pci:v000010B7d00000013sv*sd*bc*sc*i*
alias: pci:v0000A727d00000013sv*sd*bc*sc*i*
alias: pci:v0000168Cd00000013sv*sd*bc*sc*i*
alias: pci:v0000168Cd00000012sv*sd*bc*sc*i*
alias: pci:v0000168Cd00000007sv*sd*bc*sc*i*
depends: ath_hal,wlan
vermagic: 2.6.21.5 SMP mod_unload 486
parm: countrycode:Override default country code (int)
parm: outdoor:Enable/disable outdoor use (int)
parm: xchanmode:Enable/disable extended channel mode (int)
parm: rfkill:Enable/disable RFKILL capability (int)
parm: tpc:Enable/disable per-packet transmit power control (TPC) capability (int)
parm: autocreate:Create ath device in [sta|ap|wds|adhoc|ahdemo|monitor] mode. defaults to sta, use 'none' to disable (charp)
parm: ratectl:Rate control algorithm [amrr|minstrel|onoe|sample], defaults to 'sample' (charp)
parm: ath_debug:Load-time debug output enable (int)
Any help would be very much appreciated, i cant use the card at all the moment, feels like ive invested in the worse card there is.
Pr33p
Mines works OTB using the LiveCD of BT3 irc pre. Not tested with BT3b nor BT2.
Cheers
Yeah im secretly hoping the 3.0-final will solve all my problems , kinda waiting on christmas though, it cant come quick enough :POriginally Posted by Action discrete
Pr33p
Using BT2 or BT3b you can try to update Madwifi drivers. Don't use the Madwifi patch provided by Ubiquiti.
Posting Permissions