Results 1 to 9 of 9

Thread: Trouble with packet injection - please read

  1. #1
    Just burned his ISO
    Join Date
    Oct 2008
    Posts
    16

    Default Trouble with packet injection - please read

    Hello guys, for the last 4 days I have been following guides to crack wep,

    First of all, I am using BT3 USB version, i boot BT3 from a 2 gb usb drive, and i use KDE mode ( the third one)


    I have a laptop with :
    Intel 3945 a/b/g chipset

    I learned that this chipset wasnt good for packet injection so i use the following commands instead :

    modprobe -r iwl3945
    modprobe ipwraw

    After i do this, my interface changes from wlan0 to wifi0

    After that, i follow the basic steps of EVERY wep cracking guide that uses the ipwraw method, however, where I get to the

    airodump-ng wifi0

    After i put the following in, i get over 5 APs but the #data for all of them is 0 and stays 0 and goes up by maybe 2-3 every 30 seconds.

    Also, the PWR is zero, but my BEACONS increase rapidly for all APs

    Then i start injection mode and my #data is STILL under 100 after like 10 minutes,

    in the injection windows here is what is see :
    11510 packets ( all the values for the stuff in here are 0) nothing increases but the packets.

    Please tell me what i am doing wrong, I have been trying for the last 3 days with no luck! Please help me out, I have followed MANY guides from remote-exploit and many other sites , where they want me to update my drivers / kernels and all, I have done all those guides but still my packet injection doesnt work and my #data goes up REALLLLLLY slow.

    Thanks if oyu guys help or atleast read what i wrote

  2. #2
    Senior Member Shatter's Avatar
    Join Date
    Jan 2010
    Posts
    192

    Default

    How far away is the access point that you're trying to inject to?
    I have the card in me head, but you have the memory problems?

  3. #3
    Just burned his ISO
    Join Date
    Oct 2008
    Posts
    16

    Default

    Its 5 meters away from the computer, 5/5 bars.

    I have also tried wesside-ng and I get ERROR max RETRASMITS(30 bytes) over and over again.

    Thanks for reply

  4. #4
    Member
    Join Date
    Feb 2010
    Location
    Root
    Posts
    121

    Default

    Please post all commands used after "airodump-ng" and does SpoonWep work for you?

  5. #5
    Just burned his ISO
    Join Date
    Oct 2008
    Posts
    16

    Default

    I am not sure what Spoonwep is, but here are the commands i do after airodump-ng wifi0:

    5)airodump-ng wifi0
    6)airodump-ng -c 6 -w default --BSSID 00:13:46:F2:56:5F wifi0
    7)aireplay-ng -1 0 -a 00:13:46:F2:56:5F -h 00:11:22:33:44:55 wifi0
    8)aireplay-ng -3 -b 00:13:46:F2:56:5F -h 00:11:22:33:44:55 wifi0



    in step 6) the number 6 is my channel, default is the filename i set, and 00:13:46:F2:56:5F is my BBSID, and wifi0 is my interface

    However, no ARP requets, and data going up too slow, I guess injection is the problem here, and I am using BT3 straight out of the box, and loading the ipwraw drivers before doing this.

  6. #6
    Just burned his ISO
    Join Date
    Oct 2008
    Posts
    14

    Default

    this has worked for me in a similar bind - mabey it will work for you. I wish there was a list of straight up noob commands that we could all pull from...(is there?)

    try this:

    Create a new text file on the desktop and enter the target client(s)' MAC address(es) in it, one MAC per line just as in a wordlist.

    The following command repeatedly deauthenticates the listed clients (listed int he text file) from the AP to generate packets:

    Code: mdk3 eth1 d –b /root/Desktop/blacklist.txt –t 00:11:22:33:44:55 –c 6

    Substitute:
    blacklist.txt with your own named file
    00:11:22:33:44:55 with the MAC address of your AP
    6 with the channel your AP is transmitting on

  7. #7
    Member
    Join Date
    Feb 2010
    Posts
    204

    Default

    change your channel

    airmon-ng start <interface> <channel>

    then start again

  8. #8
    Just burned his ISO
    Join Date
    Oct 2008
    Posts
    16

    Default

    Browncard, I dont udnerstand what you want me to do with MDK, can you or someelse explain that more clearly? Please and thanks for replies

  9. #9
    Just burned his ISO
    Join Date
    Sep 2008
    Posts
    4

    Default

    Try this
    aireplay-ng -0 1 -a 00:13:46:F2:56:5F -h 00:11:22:33:44:55 wifi0
    then
    aireplay-ng -1 0 -a 00:13:46:F2:56:5F -h 00:11:22:33:44:55 wifi0 -- Make sure you get Authentication Sucess message.
    and finaly
    aireplay-ng -3 -b 00:13:46:F2:56:5F -h 00:11:22:33:44:55 wifi0


    let us know

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •