Results 1 to 2 of 2

Thread: Where is IP address setting GUI ?

  1. #1
    Just burned his ISO
    Join Date
    Jun 2008
    Posts
    1

    Default Where is IP address setting GUI ?

    Can any body tell me the exact location of the IP address setting application in BT3 final.

    I tried 'netconfig' command , but it does not work accordingly.


    I tried the following commands, its working,

    Dynamic IP Setting ...

    #dhcpcd -k
    #ifconfig eth0 up
    #dhcpcd

    Static IP Setting

    #ifconfig eth0 192.168.0.100/24

    #route add default gw 192.168.0.1

    #echo nameserver 192.168.0.1 > /etc/resolv.conf

  2. #2
    Senior Member
    Join Date
    Apr 2008
    Posts
    2,008

    Default

    Quote Originally Posted by thevega View Post
    I tried the following commands, its working,

    Dynamic IP Setting ...

    #dhcpcd -k
    #ifconfig eth0 up
    #dhcpcd

    Static IP Setting

    #ifconfig eth0 192.168.0.100/24

    #route add default gw 192.168.0.1

    #echo nameserver 192.168.0.1 > /etc/resolv.conf
    Exactly what is your problem since you state that the commands above are working?

    If the only problem is merely that you want a GUI for accomplishing the same as the commands above this sounds rather silly. But, it might be that it is possible to manually specify the dhcpcd settings using for example the wireless assistant or a similar program found under the internet tab in the menu.

    However, the easiest way to automate the process would probably be to write a short bash script that you can execute each time you need to set the above settings.
    -Monkeys are like nature's humans.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •