When you installed the new driver did you apply the aircrack-ng patch?
Zd1211b Usb stick probs
Hai all,
I bought a usb stick with a zd1211b chipset
It had the product code ab11101
After some google i found that it's probaly the ADATTATORE WIRELESS WLAN USB 2.0 54 MBIT
The Vendor id code is 0ace 1215
The standard zd1211rw driver in bt2.0 is not working with this stick
When i do lsusb it says Zydas
I installed the vendor driver
h t tp://zd1211.wiki.sourceforge.net/VendorBasedDriver
Followed the instructions and i managed to configure my wlan0
But the problem is it does not find any acces points
What did i do wrong is the driver sucky for this stick or do i have to use another driver or can i get it working with the zd1211rw driver ?
Thnx for any help
When you installed the new driver did you apply the aircrack-ng patch?
No i did notOriginally Posted by level
But is the patch needed to just get the driver working ?
Or is it needed to use the injection stuff
--
have a look at this, worked for me
h t t p://forums.remote-exploit.org/showthread.php?t=7688
h t t p://pastebin.com/f198fd648
Maybe you need to update your firmware:
http://sourceforge.net/project/showf...roup_id=129083
I updated the aircrack suite and used the airdriver method
Problem is it says it cannot load the driver ?
im not really familier with that lzm script and that sh script
Maye you can explain me how exactly i use that script and that lzm file ?
Thnx for all the help so far
--
make sure you have internet connection on your computer and just copy and paste the text in h t t p://pastebin.com/f198fd648 in a konsole window.
Well i got my wireless adapter working but only with the orginal driver from zydax the vendor driver
The zd1211rw driver i dont get to work whatever i try
Problem is the original driver not eems to be support injection
Grrrr
Ok well still have no wireless network with my zd1211usb stick
Whatever i try it will not work with the zd1211rw driver
I installed fedora 7 and the aircrack suite also no luck
This is all the info i get when i run backtrack 2
bt / # lsusb
Bus 2 Device 1: ID 0000:0000
Bus 1 Device 2: ID 0ace:1215 ZyDAS
Bus 1 Device 1: ID 0000:0000
the lsmod info
zd1211rw 47492 0
ieee80211softmac 25728 1 zd1211rw
ieee80211 30408 2 zd1211rw,ieee80211softmac
ieee80211_crypt 4480 1 ieee80211
The dmesg info
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
zd1211rw 1-1:1.0: RF UW2453_RF 0x9 is not supported
The ifconfig info
bt / # ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:0C:29:1F:2E:B6
inet addr:192.168.1.12 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe1f:2eb6/64 Scope:Link
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:984 errors:0 dropped:0 overruns:0 frame:0
TX packets:965 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:625620 (610.9 KiB) TX bytes:147239 (143.7 KiB)
Interrupt:10 Base address:0x2000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
The iwconfig info
/ # iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
I'm thinking seriously that my card is not supported with the zd1211rw driver
Anyone has the same vendor key and get it working
I also found that it could be a problem with the kernel but i tried fedora 7 with the latest kernel also no luck
I also have a zd1211b chipset (on a HWU8DD)and the injection is not working. Not all zd1211b are supported. Also in normal mode with both drivers (original and the patch from here) internet crashes very quickly. I've tested so much and I still make more testing. I pretty sure that in a short time this things will work; patience
Posting Permissions
