a tiny question :) about Linksys WUSb54GC

[littlefighter2]

Dear Linux-BT Users

i always used windows...since 3.11 and i knew there was linux but i really did not care i got some other linux versions at home but to get to the point

i got a Linksys WUSb54GC..
(i know,i know...i used the search button and stuff but just to know for sure)

iam using the latest bt (final) live cd and everything works great (omg 10x greater then windows)

any how..

when i use the arp request and the deauth...everyting just dies...its sending arp but captures nothing and kismet doesnt responds anymore/aerodump also stops responding...

my question is: do i have to update my drivers if so...to which ?

i see so many

[shamanvirtuel]

strange

update is always a good thing

DRIVER :
http://homepages.tu-darmstadt.de/~p_...-1.1.0.tar.bz2

AIRCRACK-NG
http://download.aircrack-ng.org/airc...0-beta1.tar.gz

[littlefighter2]

tnx! do i have to take the wlan out and install...and then put it in ? (Rofl english)

and a stupid question extra:

why does everything that you post comes above my post ? any way to change this ?

[shamanvirtuel]

in user cp you can changes the way you order the posts.....

best thing is to

download it

extract it in a dir

cd to install dir


ifconfig rausb0 down

unplug your adapter

type this :

rmmod rt73 && make && make install && modprobe rt73

plug your usb adapter

ifconfig rausb0 up

[littlefighter2]

i got something like

bt rt73-k2wrlz-1.1.0 # rmmod rt73 && make && install && modprobe rt73
ERROR: Module rt73 does not exist in /proc/modules
bt rt73-k2wrlz-1.1.0 # make
make[1]: Entering directory `/usr/src/linux-2.6.20'
CC [M] /root/Desktop/rt73-k2wrlz-1.1.0/rtmp_main.o
CC [M] /root/Desktop/rt73-k2wrlz-1.1.0/mlme.o
CC [M] /root/Desktop/rt73-k2wrlz-1.1.0/connect.o
CC [M] /root/Desktop/rt73-k2wrlz-1.1.0/rtusb_bulk.o
CC [M] /root/Desktop/rt73-k2wrlz-1.1.0/rtusb_io.o
CC [M] /root/Desktop/rt73-k2wrlz-1.1.0/sync.o
CC [M] /root/Desktop/rt73-k2wrlz-1.1.0/assoc.o
CC [M] /root/Desktop/rt73-k2wrlz-1.1.0/auth.o
CC [M] /root/Desktop/rt73-k2wrlz-1.1.0/auth_rsp.o
CC [M] /root/Desktop/rt73-k2wrlz-1.1.0/rtusb_data.o
CC [M] /root/Desktop/rt73-k2wrlz-1.1.0/rtmp_init.o
CC [M] /root/Desktop/rt73-k2wrlz-1.1.0/sanity.o
CC [M] /root/Desktop/rt73-k2wrlz-1.1.0/rtmp_wep.o
CC [M] /root/Desktop/rt73-k2wrlz-1.1.0/rtmp_info.o
CC [M] /root/Desktop/rt73-k2wrlz-1.1.0/rtmp_tkip.o
CC [M] /root/Desktop/rt73-k2wrlz-1.1.0/wpa.o
CC [M] /root/Desktop/rt73-k2wrlz-1.1.0/md5.o
LD [M] /root/Desktop/rt73-k2wrlz-1.1.0/rt73.o
Building modules, stage 2.
MODPOST 1 modules
CC /root/Desktop/rt73-k2wrlz-1.1.0/rt73.mod.o
LD [M] /root/Desktop/rt73-k2wrlz-1.1.0/rt73.ko
make[1]: Leaving directory `/usr/src/linux-2.6.20'
*** Module rt73.ko built successfully
bt rt73-k2wrlz-1.1.0 # rmmod rt73 && make && install && modprobe rt73
ERROR: Module rt73 does not exist in /proc/modules




i extracted it to desktop..and compile it (with the command ''make'' right?)

and then i typed:
rmmod rt73 && make && install && modprobe rt73

getting this:
ERROR: Module rt73 does not exist in /proc/modules

[shamanvirtuel]

well
try the rmmod and modprobe rt73 respectively unload the old driver & load new driver so .....normally it's good

try it command after command

cd to the dir where you dl it (inside Module dir)

rmmod rt73 (not a pb if error)
make
make install
plug your card
modprobe rt73 (you must have no error)

ifconfig rausb0 up
iwconfig rausb0 (you must have your card up in managed mode now)

strange because it's the way i reinstall my drivers ....
and i use this rt73 based card for years now....

[littlefighter2]

oke...it did not give an error now and its in managed mode...

so now i can test my ap ?? just with the vids of xploitz ??

and is there really not a save thing for my ap :S?? i see wep/wpa are hacked...what now ????

[shamanvirtuel]

wpa with aes and your key needs to be maximum length and with all possible weird chars..........

like this one
12334-(é3#@|\``#|~¹¤$$$$jfhfhqjzHHGhbbbHGQQANnb

[littlefighter2]

ROFL!!

damned...i think i got the wrong damn wllan (rausb0)...

iam getting the same trouble like

Tiny Injection Problem (Xploitz)

if i use this function:

aireplay-ng -1 0 -e Myhome -a XX:XX:XX:XX:XX:XX -h 00:11:22:33:44:55 rausb0

I Get:

14:21:00 Waiting for beacon frame (BSSID: XX:XX:XX:XX:XX:XX)
14:21:01 Sending Authentication Request
14:21:03 Sending Authentication Request
14:21:06 Sending Authentication Request
14:21:06 Authentication successful
14:21:06 Sending Association Request
14:21:07 Association denied (code 514)
14:21:10 Sending Authentication Request
14:21:13 Sending Authentication Request
14:21:14 Authentication successful
14:21:14 Sending Association Request
14:21:20 Sending Authentication Request

Attack was unsuccessful. Possible reasons


and when i use this function: iwconfig rausb0 rate 54M

14:24:53 Waiting for beacon frame (BSSID: XX:XX:XX:XX:XX:XX)
14:25:19 Sending Authentication Request
14:25:21 Sending Authentication Request
14:25:24 Sending Authentication Request
14:25:27 Sending Authentication Request
14:25:30 Sending Authentication Request
14:25:34 Sending Authentication Request
14:25:38 Sending Authentication Request

Attack was unsuccessful. Possible reasons:


its the card isent it...?

the ap is in the next room....

[shamanvirtuel]

Association denied ?

mac filtering enabled on the router ?

if so disable it or :



ifconfig rausb0 down
macchanger --mac xx:yy:zz:ee:dd:ff (authorized mac) rausb0
ifconfig rausb0 up
iwconfig rausb0 channel XX rate 1M