Results 1 to 3 of 3

Thread: HP Mini 110 - Built in Ethernet

  1. #1
    Just burned his ISO
    Join Date
    Jan 2010
    Location
    Warwickshire, UK
    Posts
    9

    Default HP Mini 110 - Built in Ethernet

    Hi,

    I have recently installed the 2.6.30.9 kernel on my HP Mini 110, before the install i had to install an Atheros driver for the internal network card.

    driver:- Atheros AR8121 / AR8113 PCI-E Ethernet Adapter.

    After the install i am unable to get this to compile against the new kernel.

    I have the following information from the lspci and lshw -C Network

    00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
    00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
    00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
    00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
    00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
    00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
    00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
    00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
    00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
    00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
    00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
    00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02)
    01:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
    02:00.0 Ethernet controller: Attansic Technology Corp. Device 1062 (rev c0)
    *-network
    description: Network controller
    product: BCM4312 802.11b/g
    vendor: Broadcom Corporation
    physical id: 0
    bus info: pci@0000:01:00.0
    version: 01
    width: 64 bits
    clock: 33MHz
    capabilities: pm msi pciexpress bus_master cap_list
    configuration: driver=b43-pci-bridge latency=0
    *-network UNCLAIMED
    description: Ethernet controller
    product: Attansic Technology Corp.
    vendor: Attansic Technology Corp.
    physical id: 0
    bus info: pci@0000:02:00.0
    version: c0
    width: 64 bits
    clock: 33MHz
    capabilities: pm msi pciexpress vpd bus_master cap_list
    configuration: latency=0


    At the moment i can get the internal network card to detect as an Atheros card. This all seems since i installed the new 2.5.30.9 kernel.

    Can someone help me please?

    Thanks

    Simon

  2. #2
    Just burned his ISO
    Join Date
    Jan 2010
    Location
    Warwickshire, UK
    Posts
    9

    Default fixed

    Hi All,

    I managed to fix the problem with the following driver:-

    AR81Family-linux-v1.0.1.4

    Thanks

    Si

  3. #3
    Senior Member
    Join Date
    Aug 2007
    Posts
    916

    Default

    Paste your lspci -n output.

    There is also this for some useful information: Attansic L1 driver

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •