Results 1 to 5 of 5

Thread: Aircrack help! PLease

  1. #1
    Just burned his ISO
    Join Date
    Dec 2009
    Posts
    2

    Exclamation Aircrack help! PLease

    Hi,
    i'm new here and i'm triyng aircrack, i did everything, now i'm "reading" packtes, i got already over 900 000 (0 ARP and 2 ACKs) 0 sent
    The data is on 3925 .it's 3,5 hours now, what is wrong ???

  2. #2
    Moderator fancy's Avatar
    Join Date
    Jan 2010
    Posts
    204

    Default

    Quote Originally Posted by player99 View Post
    Hi,
    i'm new here and i'm triyng aircrack, i did everything, now i'm "reading" packtes, i got already over 900 000 (0 ARP and 2 ACKs) 0 sent
    The data is on 3925 .it's 3,5 hours now, what is wrong ???
    Obviously you didn't do everything!
    Did you try out the "search" button?? Or google???
    There are so many tutorials, papers, documents, etc. covering this topic - here in this forums and on the net.......

    Besides the information you provide is too scarce....
    What kind of card do you have?
    What do you actually want to do?
    Did you check if your card supports injection?
    ........................

  3. #3
    Just burned his ISO
    Join Date
    Dec 2009
    Posts
    2

    Default

    I got intel 5100 AGN, it's fully supported, yes i tried search and google, and i only found, that this card is supported, and that you need to read maximaly 1 000 000 packets

    i have had 1.2 mil, and the konsole closed !! WTF ??? nearly 5 hours for nothing !

  4. #4
    Super Moderator Archangel-Amael's Avatar
    Join Date
    Jan 2010
    Location
    Somewhere
    Posts
    8,012

    Default

    Mind the edit button.
    Also check the aircrack wiki and here in the tutorial section for guides. 5 hours is way to long.
    To be successful here you should read all of the following.
    ForumRules
    ForumFAQ
    If you are new to Back|Track
    Back|Track Wiki
    Failure to do so will probably get your threads deleted or worse.

  5. #5
    Just burned his ISO
    Join Date
    Jan 2010
    Posts
    4

    Default

    I would google "Aircrack-ng Simple wep crack" it will take you to a great tutorial. I am specifically going to tell you to read the following section..

    In order for an access point to accept a packet, the source MAC address must already be associated. If the source MAC address you are injecting is not associated then the AP ignores the packet and sends out a “DeAuthentication” packet in cleartext. In this state, no new IVs are created because the AP is ignoring all the injected packets.

    The lack of association with the access point is the single biggest reason why injection fails. Remember the golden rule: The MAC you use for injection must be associated with the AP by either using fake authentication or using a MAC from an already-associated client.

    To associate with an access point, use fake authentication:


    aireplay-ng -1 0 -e teddy -a 00:14:6C:7E:40:80 -h 00:0F:B5:88:AC:82 ath0
    Hope that helps.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •