Results 1 to 8 of 8

Thread: Wirleless

  1. #1
    Just burned his ISO
    Join Date
    Apr 2010
    Posts
    13

    Question Wirleless

    I know my wireless drivers are supported...but I don't know how to set it all up. Can anyone help?

    Thanks!

  2. #2
    Senior Member secure_it's Avatar
    Join Date
    Feb 2010
    Location
    在這兩者之間 BackTrack是4 FwdTrack4
    Posts
    854

    Default

    No one is astrologist here who can predict which card you are using & always use sensible descriptive Title in post.let us know the chipset model and tell us the output of

    iwconfig
    ifconfig -a

    if its mini pci-e or pci-e use
    lspci
    else if usb then
    lsusb

  3. #3
    Just burned his ISO
    Join Date
    Apr 2010
    Posts
    13

    Default

    IWCONFIG:
    root@bt:~# iwconfig
    lo no wireless extensions.

    eth0 no wireless extensions.

    IFCONFIG -a:
    eth0 Link encap:Ethernet HWaddr 00:23:ae:0d:ec:0a
    inet addr: [MY IP HERE] Bcast:192.168.2.255 Mask:255.255.255.0
    inet6 addr: fe80::223:aeff:fe0d:ec0a/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1492 Metric:1
    RX packets:7832 errors:0 dropped:0 overruns:0 frame:0
    TX packets:6079 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:10074879 (10.0 MB) TX bytes:567533 (567.5 KB)
    Interrupt:16

    lo Link encap:Local Loopback
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:23 errors:0 dropped:0 overruns:0 frame:0
    TX packets:23 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:2995 (2.9 KB) TX bytes:2995 (2.9 KB)

    --------------------------------------------------------------------------------------------------

    I don't know what chipset I'm using, but I'm on a Dell i1525, here is the drivers link from the Dell website:

    support.dell.com/support/downloads/driverslist.aspx?c=us&l=en&s=gen&ServiceTag=&Syste mID=INS_PNT_PM_1525&os=WLH&osl=en&catid=&impid=

  4. #4
    Junior Member
    Join Date
    Mar 2008
    Posts
    96

    Default

    lspci would probably give us a good idea of what wireless card you're using.

    You just need to type
    Code:
    lspci

  5. #5
    Just burned his ISO
    Join Date
    Apr 2010
    Posts
    13

    Default

    lspci:

    00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
    00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
    00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
    00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
    00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
    00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
    00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
    00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
    00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)
    00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02)
    00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
    00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
    00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
    00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2)
    00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02)
    00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02)
    00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02)
    00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
    02:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
    02:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
    02:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
    02:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
    02:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)
    09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 12)
    0b:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)

  6. #6
    Just burned his ISO
    Join Date
    Oct 2007
    Posts
    22

    Default

    Broadcom Corporation BCM4312 802.11b/g (rev 01). Thats your wireless chipset.

    The card is supported by the B43 Module, not legacy, only downside is 802.11a is not supported.

    Try opening a terminal window and doing the following:

    Code:
    rmmod b43legacy
    modprobe b43

    Once you have done that - do a:

    Code:
     ifconfig -a
    and see if wlan0 is listed as an interface.

  7. #7
    Senior Member secure_it's Avatar
    Join Date
    Feb 2010
    Location
    在這兩者之間 BackTrack是4 FwdTrack4
    Posts
    854

    Default

    I have doubt as this card is not supported cause it may have PCI ID 14e4:4315 which won't work with aircrack-ng suite and only can use as Ndiswrapper.I would like get the output of
    lspci -nn

  8. #8
    Senior Member
    Join Date
    Aug 2007
    Posts
    916

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •