Looks like the probes use windows zeroconfig.

Depends on hardware.
The AP can refuse the second card to connect.
The signal can go to two cards like you have opened two browsers in one computer.
Most probably the card that is closer to the AP...

I had a similar problem with ubuntu 6.10 .The whole point was that the system didn't switch back to a former session but opened another one.
Maybe you can try to run BT from different system using...

Most probably you have the situation like that:
when you log in root you open root session
when you next loggin user , still in memory is root data
when you log root again it opens another root...

The best way is to register packets an look at them.
There are the tools like wireshark or tcpdump with with you can
monitor packets alive , or open *.cap files registered with use of
airodump or...

You should read more on the pages of madwifi-ng drivers
---------
first try not to run Kismet before
then check
#iwconfig
after that
#wlanconfig ath0 destroy
and if it is ath1..2...

Pay attention to two factors :
antenna producents show antenna powers too optimistic , they usually add +1db.
You have loss due to long cables 50 inch -> 1-2 db , and 0,5-1db loss on MC screws and...

Try to use only one antenna.

You are not associated to AP. The card is hopping on channels trying to find the AP. Iwconfig status is somehow misleading, maybe its the bug in madwifi-ng.
I don't see it in the action , so don't...

Maybe instead of kismet you can run airodump-ng ath1 -c 0
and see if you can grab the frames.
Wireshark can capture the frames form athX or kisX interfaces, maybe that will help you?

In KDE>settings >power control you can define action after lidclose
so you can try to change the settings , they go with ACPI, so you can try boot acpi=off and similar, but it would look like kernel...

Just one word with DWL-G650 works fine,
but there are different versions.
The new cards sold are versions C2-C4 and are OK,
but if you want to buy a used one check the version. A,B6 and C1 are not...

http://www.aircrack-ng.org/doku.php?id=korek_chopchop

Only when chopchop attack succed it will save the xor file
you should get :
.....Saving keystream in replay_dec-xxxxx.xor ...
so keep trying to send various packets

But just that card works perfectly with Karma.
So when you back to Karma borrow the card again.:)

Needless to say the guides are prepared for installing BT from linux
so first you have to close the windows and start the system from live CD
( enable boot from CD in BIOS options )
then the...

Windows filesystems don't support some features needed by Linux such as symbolic links etc. , so you cannot full install BT on NTFS or FAT ( however
it is possible to install compressed BT say on...

Finally you can do it like :
after
#wlanconfig ath0 create wlandev wifi0 wlanmode monitor
put
#wlanconfig ath0 destroy
( if you have more created like ath1 - wlanconfig ath1 destroy )
and...

Unfortunately I see no pictures of Airlink, but I guess it is similar to
D-link DWL-G650 and you should see how they did it with that card.
Don't remember the web pages but it is easy to find...

Try search button for Ubiquiti on this forum , many of people shared their opinions here.
It is good but probably not that good as you expect.

The answer was to the first question, to the second
the acces through the LAN is the same like through WAN , but you have to be connected to it. So you could acess the router from say an internet...

It can be, but first try simplier solutions.
Nmap in some scans when gets no answer from a port labels it as filtered or closed.
First make sure what is an exact state of a port, using different...

Unfortunately I don't have neither Hermes nor BT2 working,
so I wash my hands , but before that a few ideas :
copy or make symbolic links /usr/sbin/iwconfig to /sbin/iwconfig
(as iwconfig it is in...

PCMCIA with an external antenna socket.
Read the post which card to buy ....
also compability lists on aircrack and kismet web pages.
BT has the all drivers included, so all the cards listed...

I would suggest to buy a PCMCIA card, or to replace miniPCI card in your laptop,
as in the comparison USB cards have poorer performance.
Working with Kismet you see almost no difference, but...