Macbook Pro 9.2 wireless issue
I just recently installed Backtrack 5 on my Macbook Pro 9.2 and had some problems getting my wifi working. After enabling b43 and installing b43-fwcutter and firmware-b43-installer i managed to connect to my own wireless with WPA-Supplicant and this script:
Code:
#wireless-wpa.sh
iface=wlan0
ifconfig $iface down
iwconfig $iface mode Managed
ifconfig $iface up
killall wpa_supplicant
wpa_supplicant -B -Dwext -i $iface -c ./wireless-wpa.conf -dd
dhclient $iface
Code:
#wireless-wpa.conf
ctrl_interface=/var/run/wpa_supplicant
network={
ssid="h0tsp0t"
scan_ssid=1
key_mgmt=WPA-PSK
psk="**********"
}
But when i tried to connect to the wireless at my school with terminal i wasn't able to get a connection. My schools network doesn't have encryption so i thought i would try set up a wpa2 network from my android phone. Here's what i get when i connect to my home wireless with the script:
Code:
Initializing interface 'wlan0' conf './wireless-wpa.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
Configuration file './wireless-wpa.conf' -> '/root/./wireless-wpa.conf'
Reading configuration file '/root/./wireless-wpa.conf'
ctrl_interface='/var/run/wpa_supplicant'
Line: 3 - start of a new network block
ssid - hexdump_ascii(len=7):
68 30 74 73 70 30 74 h0tsp0t
scan_ssid=1 (0x1)
key_mgmt: 0x2
PSK (ASCII passphrase) - hexdump_ascii(len=12): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Priority group 0
id=0 ssid='h0tsp0t'
SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf flags 0x0
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 7c:d1:c3:75:72:36
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
wpa_driver_wext_set_drop_unencrypted
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
WPS: UUID based on MAC address - hexdump(len=16): e8 68 af f0 1d b2 5c 87 82 eb 9f 7f 5e 8a 4c 39
WPS: Build Beacon and Probe Response IEs
WPS: * Version
WPS: * Wi-Fi Protected Setup State (0)
WPS: * Version
WPS: * Wi-Fi Protected Setup State (0)
WPS: * Response Type (2)
WPS: * UUID-E
WPS: * Manufacturer
WPS: * Model Name
WPS: * Model Number
WPS: * Serial Number
WPS: * Primary Device Type
WPS: * Device Name
WPS: * Config Methods (0)
WPS: * RF Bands (3)
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
Added interface wlan0
Daemonize..
There is already a pid file /var/run/dhclient.pid with pid 1776
killed old client process, removed PID file
Internet Systems Consortium DHCP Client V3.1.3
Copyright 2004-2009 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Listening on LPF/wlan0/7c:d1:c3:75:72:36
Sending on LPF/wlan0/7c:d1:c3:75:72:36
Sending on Socket/fallback
DHCPREQUEST of 192.168.1.21 on wlan0 to 255.255.255.255 port 67
DHCPREQUEST of 192.168.1.21 on wlan0 to 255.255.255.255 port 67
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 3
DHCPOFFER of 192.168.1.18 from 192.168.1.1
DHCPREQUEST of 192.168.1.18 on wlan0 to 255.255.255.255 port 67
DHCPACK of 192.168.1.18 from 192.168.1.1
bound to 192.168.1.18 -- renewal in 124166 seconds.
And when i change the script's ssid and psk to my phones network and run it i get this:
Code:
wpa_supplicant: no process found
Initializing interface 'wlan0' conf './wireless-wpa.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
Configuration file './wireless-wpa.conf' -> '/root/./wireless-wpa.conf'
Reading configuration file '/root/./wireless-wpa.conf'
ctrl_interface='/var/run/wpa_supplicant'
Line: 3 - start of a new network block
ssid - hexdump_ascii(len=5):
74 72 6f 6c 6c troll
scan_ssid=1 (0x1)
key_mgmt: 0x2
PSK (ASCII passphrase) - hexdump_ascii(len=12): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Priority group 0
id=0 ssid='troll'
SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf flags 0x0
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 7c:d1:c3:75:72:36
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
wpa_driver_wext_set_drop_unencrypted
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
WPS: UUID based on MAC address - hexdump(len=16): e8 68 af f0 1d b2 5c 87 82 eb 9f 7f 5e 8a 4c 39
WPS: Build Beacon and Probe Response IEs
WPS: * Version
WPS: * Wi-Fi Protected Setup State (0)
WPS: * Version
WPS: * Wi-Fi Protected Setup State (0)
WPS: * Response Type (2)
WPS: * UUID-E
WPS: * Manufacturer
WPS: * Model Name
WPS: * Model Number
WPS: * Serial Number
WPS: * Primary Device Type
WPS: * Device Name
WPS: * Config Methods (0)
WPS: * RF Bands (3)
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
Added interface wlan0
Daemonize..
Internet Systems Consortium DHCP Client V3.1.3
Copyright 2004-2009 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Listening on LPF/wlan0/7c:d1:c3:75:72:36
Sending on LPF/wlan0/7c:d1:c3:75:72:36
Sending on Socket/fallback
DHCPREQUEST of 192.168.1.21 on wlan0 to 255.255.255.255 port 67
DHCPREQUEST of 192.168.1.21 on wlan0 to 255.255.255.255 port 67
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 3
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 16
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 18
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 16
No DHCPOFFERS received.
Trying recorded lease 192.168.1.21
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
--- 192.168.1.1 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
No working leases in persistent database - sleeping.
iwconfig wlan0:
Code:
wlan0 IEEE 802.11bg ESSID:"h0tsp0t"
Mode:Managed Frequency:2.422 GHz Access Point: 00:11:09:0E:44:A7
Bit Rate=24 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=51/70 Signal level=-59 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:20 Invalid misc:311 Missed beacon:0
ifconfig wlan0:
Code:
wlan0 Link encap:Ethernet HWaddr 7c:d1:c3:75:72:36
inet addr:192.168.1.18 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::7ed1:c3ff:fe75:7236/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:10586 errors:0 dropped:0 overruns:0 frame:0
TX packets:4165 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:5839605 (5.8 MB) TX bytes:660204 (660.2 KB)
lspci:
Code:
00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Device 0166 (rev 09)
00:14.0 USB Controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04)
00:1a.0 USB Controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4)
00:1c.2 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 3 (rev c4)
00:1d.0 USB Controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04)
01:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM57765 Gigabit Ethernet PCIe (rev 10)
01:00.1 SD Host controller: Broadcom Corporation NetXtreme BCM57765 Memory Card Reader (rev 10)
02:00.0 Network controller: Broadcom Corporation BCM4331 802.11a/b/g/n (rev 02)
03:00.0 FireWire (IEEE 1394): Agere Systems FW643 PCI Express1394b Controller (PHY/Link) (rev 08)
Any help would be appreciated and if more information is needed please let me know
