problem with connexion on my alfa awus036h
hi guys
i have a problem on my BT5 R3 in connexion , when i connecte on internet using my alfa awus036h in the beginning evreything is alright but when it paste 1 minut the connexion is lost !! but i can see i still connecting with my rooter ! i have in power -65dbm , when i boot with win 7 there is no problem evreytihng is OK !
some commend :
root@bt:~# ifconfig
eth0 Link encap:Ethernet HWaddr dc:0e:a1:ac:42:2d
UP BROADCAST MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
Interruption:16
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:390 erreurs:0 :0 overruns:0 frame:0
TX packets:390 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:119006 (119.0 KB) Octets transmis:119006 (119.0 KB)
wlan0 Link encap:Ethernet HWaddr XX:XX:XX:XX:XX:XX
UP BROADCAST MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
wlan1 Link encap:Ethernet HWaddr XX:XX:XX:XX:XX:XX
inet adr:XXX.XXX.1.X Bcast:XXX.XXX.1.XX5 Masque:XXX.XX5.XX.0
adr inet6: fe80::2c0:caff:fe6a:cd05/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:2941 erreurs:0 :0 overruns:0 frame:0
TX packets:3494 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:2951346 (2.9 MB) Octets transmis:440583 (440.5 KB)
root@bt:~# iwconfig
lo no wireless extensions.
wlan1 IEEE 802.11bg ESSID:"XXXX_XXX"
Mode:Managed Frequency:2.437 GHz Access Point: XX:XX:XX:XX:XX:XX
Bit Rate=54 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=44/70 Signal level=-66 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=16 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:on
eth0 no wireless extensions.
i hope u will help me and thank a lot
Re: problem with connexion on my alfa awus036h
Ok.. Do you know how to interpretate the info from commands?..
Take a close look at it, at the iwconfig....
Let me quote:
wlan1 IEEE 802.11bg ESSID:"XXXX_XXX"
Mode:Managed Frequency:2.437 GHz Access Point: XX:XX:XX:XX:XX:XX
Bit Rate=54 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=44/70 Signal level=-66 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
You can have 100% power on signal, BUT "Link Quality" will define that, LINK..You are little bit above 60%, and man, I've got many many time seeing that problem...Bad Link Quality, BAD conection, no matter the strenght...It means too much interference (RFI noise, walls, windows, any aluminum mesh in windows, bricks, etc...).
Get close to AP, the link quality says so.
If problem still even with a much better quality, (>= 85%), you might have a bad Alfa.
Luck
Re: problem with connexion on my alfa awus036h
alright bro thank you alot :)
Re: problem with connexion on my alfa awus036h
