i got a problem in my ALFA AWUS036NHR on airodump-ng (no assocciated)

i got a problem in my ALFA AWUS036NHR on airodump-ng
(no assocciated) even in my roter with computers connected i still have(no assocciated)

how to solve the problem? someone help me pls

tnk you!

Post what have you done, also chipset and wep or wpa-wpa2..Sorry, we cannot take guesses..

luck..

Hello helsil
This Is my First Post Here in BackTrack Forums
I have also Just got AWUS036NHR

Man i think The drivers for it is Beta'tastic on Linux
I think You (and I) May need new Drivers
I will test My Card And See Wat It is up in my lab
Becuse I have Noticed That it dose Show a Lot of (no assocciated) stations when you use airodump-ng
Since I dont intend to use the AWUS036NHR for pentest i have not run aircrack-ng on it.

Hello maverik35
You wanted to know about the driver
Its a RTL8188RU chipset driver version unknown
but im using Backtrack5 R3 KDE x64 (i have no idea what helsil is using)

Ok i hope The moderator remembered to post my first post or this will make no Sense

I have tested and This is what i get :
airodump-ng mon0 command:

Code:

---

CH  9 ][ Elapsed: 5 mins ][ 2012-12-01 17:45                                 
                                                                               
 BSSID              PWR  Beacons    #Data, #/s  CH  MB  ENC  CIPHER AUTH ESSID
                                                                               
 F4:EC:38:xx:xx:xx  -91    1054      464    0  9  54e  WPA2 CCMP  PSK  DarkPhoenix.Net
                                                                               
 BSSID              STATION            PWR  Rate    Lost    Frames  Probe     
                                                                               
 (not associated)  00:26:66:xx:xx:xx  -35    0 - 2      0      23

---

airmon-ng wlan1 command:

Code:

---

Interface      Chipset        Driver

wlan1          Unknown        rtl8192cu - [phy1]
                                (monitor mode enabled on mon0)
wlan0          Intel 4965AGN  iwl4965 - [phy0]

---

So i think its a driver issue...
The below station is suppose to be connected to the AP on the top
but its clearly NOT


Here is something kinda related

airmon-ng wlan0 command:

Code:

---

wlan0          Intel 4965AGN  iwl4965 - [phy0]SIOCSIFFLAGS: Unknown error 132

---

So Maby the backtrack r3 x64 KDE drivers are all broken or something
I know for a fact that my 4965AGN worked on BT5r0 KDE 32bit

Now How to fix..pls

Quote:

---

Originally Posted by Firebloodphoenix

Hello maverik35
This Is my First Post Here in BackTrack Forums
I have also Just got AWUS036NHR

Man i think The drivers for it is Beta'tastic on Linux
I think You (and I) May need new Drivers
I will test My Card And See Wat It is up in my lab
Becuse I have Noticed That it dose Show a Lot of (no assocciated) stations when you use airodump-ng
Since I dont intend to use the AWUS036NHR for pentest i have not run aircrack-ng on it.

Hello helsil
You wanted to know about the driver
Its a RTL8188RU chipset driver version unknown
but im using Backtrack5 R3 KDE x64 (i have no idea what maverik35 is using)

---

I use alfa 500 and alfa 1 chipset rtl8187L "always working out of the box, no hassels at all"

Now, one more time, here we go again and again: CHIPSET is the trick..Chipset, no the brand...Once you have the chipset info, then you start to realize what you can and cannot do...

refer here: http://www.aircrack-ng.org/doku.php?...st_card_to_buy
and read it all...

refer also here: http://wireless.kernel.org/en/users/Drivers

Now if you want to use aircrack-ng you need 2 and only 2 things that driver must be capable of: "MONITOR MODE" and "INJECTION in MONITOR MODE"..No monitor mode, no injection, as easy as 123.

You want to use the rest of BT5 (excluding all app that uses monitor mode or aircrack-ng as support), refer to the second link I posted or the vendor site for driver.

The verdor's or linux driver, do not assure you that supports monitor mode and injection natively, in such case, you need to patch the driver, look for the patch in the aircrack-ng site, depending on your chipset and kernel version.

The BT5 job is to provide all possible "patched" drivers and "natively" drivers to many wifi cards..If your card is not supported, you have to work it out.

Buy a supported device or use beini (RTL 8xxxx version) for the chipset and it is a aircrack-ng GUI fork. It works for all rtl 8xxx series. But just to audit wifi AP's.

Luck.

I found This :
http://store.rokland.com/blogs/news/...nux-compatible

Maby it will Help
i Will test it later.....

Quote:

---

Originally Posted by Firebloodphoenix

I found This :
http://store.rokland.com/blogs/news/...nux-compatible

Maby it will Help
i Will test it later.....

---

Try it and if it works, you might end helping so many people here and others forums.

Keep us up to date, please.

I found this too:
http://hezik.nl/alfa-awus036nhr-chip...iver-install/#
If you read the comments they have the same problems as im having
Not connecting to AP
Not Showing Connected stations
Not able to change TX power

so i think updating to compat-wireless-2011-10-06.tar.bz2 drivers are pointless
maby try compat-wireless-2012-12-02.tar.bz2

im having CPU compatible issues with my Linux box so till i have the bios updated i cannot test
(im using 3g and plan to go online With BT thru a Windows ICS im using my laptop to connect to internet in windows bt i running BT on it now)

i hv a problem in my ALFA AWUS036NHR on airodump-ng , use bactrack 5 or r3 and is the same
(no assocciated) even in my roter with computers connected i still have(no assocciated)

some 1 know to solve the problem? someone help me pls

tnks

I just got My new AWUS036NH...
In Windows i get more AP's with my AWUS036NHR (With inSSIDer) than the AWUS036NH
But at least i can capture and inject with the AWUS036NH (dose not work on VMware) and i have to reboot ever so often
I only hope the next version of Backtrack Supports the AWUS036NHR fully....