card wont connect
Hi all I am trying to connect to my WEP network with my wireless card (Senao 2511) I have read the thread below and done everything it says to do.
This is what I have tried so far.
Put card into managed mode
iwconfig wlan0 essid 'nameofnetwork'
iwconfig wlan0 key 3B5D3C7D207E37DCEEEDD301E3
iwconfig wlan0 ap 03:27:A8:BC:0F:F1
I donít seem to be getting an IP and I donít have a clue what to try next.
Originally Posted by wallsballs
This will work.
Plug your card in. And type in...
ifconfig wlan0 down
iwconfig wlan0 essid yournetworkhere key 112233445566
ifconfig wlan0 up
btw...you might want to go into your /etc/dhcpc folder and delete all contents before you run dhcpcd wlan0 in my commands above.;)
shared key authentication
Other than that, mac filtering comes to mind.
the channel parameter is missing too....that might help...
i can't connect my rt73 without giving it the right channel
When testing againist my wep enabled AP with dhcp enabled, using Senao 2511 by entering essid and key it configures all other required info.
Thanks guys for the speedy response and all is working now so thanks very much.