Printable View
thanks so much for this but i wish you could help me...
my first trouble start when im trying to download ar9170-1.fw and ar9170-2.fw beacuse i dont get this files instead i get some ntlrq4uj.bin.part ?/ what im supposed to do with this files?
second when i try to execute the command ln -s ... i get no such file error too?? what im doing wrong tks so much for your help patient and time
you can get the firmware HEREQuote:
Originally Posted by nomellamojavier
tks a lot that would save me a lot of time but unfortunatly i solved the problem this way i downloaded bactrack 4 r2 and recognized my card without problems, then i had another error card didn't inject . after doing so much research trying new methods almost all on the web solution was easy i pluged usb w422ng then ifconfig wlan1 up and voila" card was injecting thanks all 4 your help, ps excuse my spelling i'm not american neither english xD
Worked like a charm! :) Thanks so much!!:cool:
HELP please!!!!
BT4 final installed on HDD
d-link dwa-160 A2
ar9170.fw, ar9170-1.fw, ar9170-2.fw mv in /lib/firmware
install compat-wireless-2.6.32.3
blacklist ath9k
blacklist arusb_lnx
What wrong??Code:======================================================
root@bt:~# ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
===============================================
root@bt:~# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
===============================================================
root@bt:~# lsmod
Module Size Used by
ar9170usb 54140 0
mac80211 205220 1 ar9170usb
ath 7732 1 ar9170usb
cfg80211 118824 3 ar9170usb,mac80211,ath
rfkill_backport 17096 1 cfg80211
sbs 10940 0
sbshc 4500 1 sbs
acpi_cpufreq 7808 0
cpufreq_stats 4728 0
cpufreq_ondemand 7080 2
cpufreq_performance 1300 0
cpufreq_conservative 7048 0
cpufreq_powersave 1268 0
freq_table 3476 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
iptable_filter 2324 0
ip_tables 10916 1 iptable_filter
x_tables 13592 1 ip_tables
parport_pc 24292 0
lp 9412 0
parport 30572 2 parport_pc,lp
snd_hda_codec_realtek 194936 1
snd_hda_intel 24712 0
snd_hda_codec 57204 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 6776 1 snd_hda_codec
snd_pcm_oss 37728 0
snd_mixer_oss 14324 1 snd_pcm_oss
snd_pcm 67704 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
uvcvideo 58016 0
btusb 11592 0
videodev 37056 1 uvcvideo
v4l1_compat 13336 2 uvcvideo,videodev
bluetooth 54148 1 btusb
snd_seq_dummy 2424 0
video 18024 0
output 2388 1 video
rtc_cmos 10156 0
rtc_core 15792 1 rtc_cmos
rtc_lib 2388 1 rtc_core
psmouse 41732 0
serio_raw 5016 0
snd_seq_oss 27328 0
snd_seq_midi 5952 0
asus_laptop 16816 0
snd_rawmidi 19488 1 snd_seq_midi
led_class 3608 2 ar9170usb,asus_laptop
snd_seq_midi_event 5972 2 snd_seq_oss,snd_seq_midi
snd_seq 47568 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 19068 2 snd_pcm,snd_seq
snd_seq_device 6048 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
intel_agp 26108 1
snd 50468 12 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
agpgart 29356 1 intel_agp
shpchp 31560 0
soundcore 5856 1 snd
snd_page_alloc 7836 2 snd_hda_intel,snd_pcm
evdev 9120 11
sg 25064 0
ata_generic 4536 0
pata_acpi 3892 0
atl1e 61072 0
fuse 53104 1
plase help me!
may be try carl9170 ????
Use BackTrack 4 R2. With BT4 R2, your adapter just needs to be plugged in and it will work. No changes need.Quote:
Originally Posted by Mortis2011
I wouldn't install the carl9170 drivers. I tried carl9170 about 2 weeks ago and it sucks. It lowers the max Tx power, couldn't inject in monitor mode (ch. stuck at ch -1) and in managed mode my connection was a little more than 10 dBm weaker than with the ar9170usb dirver.
Thanks, I already did. But a new problem. After approximately 5 seconds after connecting adapter is disconnected from the access point / stop capturing.Quote:
Originally Posted by dustyboner
Help!
PS: sorry for my english
the problem with channel -1, You just apply a patch on kernel
I think that this resolve the problem with wrong fixed channel,Code:
$ cat chan.c
--- net/wireless/chan.c
+++ net/wireless/chan.c
@@ -49,9 +49,12 @@ int cfg80211_set_freq(struct cfg80211_registered_device *rdev,
{
struct ieee80211_channel *chan;
int result;
+ struct wireless_dev *mon_dev = NULL;
- if (wdev && wdev->iftype == NL80211_IFTYPE_MONITOR)
+ if (wdev && wdev->iftype == NL80211_IFTYPE_MONITOR) {
+ mon_dev = wdev;
wdev = NULL;
+ }
if (wdev) {
ASSERT_WDEV_LOCK(wdev);
@@ -76,5 +79,8 @@ int cfg80211_set_freq(struct cfg80211_registered_device *rdev,
if (wdev)
wdev->channel = chan;
+ if (mon_dev)
+ mon_dev->channel = chan;
+
return 0;
}
BT4 R2 have many fixes, I have a TP-LINK WN422G and I not need of the patch and work a charm ( Atheros Communications, Inc. TP-Link TL-WN422G v2 802.11g [Atheros AR9271]
)
Regards,
BT4 R2 installed, its not detecting my WN111v2 atheros
Do i have to get drivers ???Code:root@bt:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:24:54:1f:05:ee
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:19
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:308 errors:0 dropped:0 overruns:0 frame:0
TX packets:308 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:15400 (15.4 KB) TX bytes:15400 (15.4 KB)
wlan0 Link encap:Ethernet HWaddr 00:1d:e0:20:da:c3
inet addr:192.168.182.7 Bcast:192.168.182.255 Mask:255.255.255.0
inet6 addr: fe80::21d:e0ff:fe20:dac3/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:19477 errors:0 dropped:0 overruns:0 frame:0
TX packets:17401 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:19149367 (19.1 MB) TX bytes:3675776 (3.6 MB)
root@bt:~# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11abgn ESSID:"WiFi-Hot-Spot"
Mode:Managed Frequency:2.437 GHz Access Point: 48:5B:39:0E:5C:9A
Bit Rate=1 Mb/s Tx-Power=15 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=65/70 Signal level=-45 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
root@bt:~# dmesg | tail
ADDRCONF(NETDEV_UP): eth0: link is not ready
wlan0: no IPv6 routers present
CE: hpet increased min_delta_ns to 7500 nsec
CE: hpet increased min_delta_ns to 11250 nsec
usb 2-3: USB disconnect, address 6
usb 2-3: new high speed USB device using ehci_hcd and address 7
usb 2-3: reset high speed USB device using ehci_hcd and address 7
usb 2-3: ar9170.fw firmware file not found, trying old firmware...
phy3: Selected rate control algorithm 'minstrel'
phy3: writing reg 0x1d0100 (val 0x3) failed
root@bt:~#
here my chan.c. What need to do with?Quote:
Originally Posted by spawn
======Code:root@bt:/usr/src/linux-source-2.6.35.8/net/wireless# cat chan.c
/*
* This file contains helper code to handle channel
* settings and keeping track of what is possible at
* any point in time.
*
* Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
*/
#include <net/cfg80211.h>
#include "core.h"
struct ieee80211_channel *
rdev_freq_to_chan(struct cfg80211_registered_device *rdev,
int freq, enum nl80211_channel_type channel_type)
{
struct ieee80211_channel *chan;
struct ieee80211_sta_ht_cap *ht_cap;
chan = ieee80211_get_channel(&rdev->wiphy, freq);
/* Primary channel not allowed */
if (!chan || chan->flags & IEEE80211_CHAN_DISABLED)
return NULL;
if (channel_type == NL80211_CHAN_HT40MINUS &&
chan->flags & IEEE80211_CHAN_NO_HT40MINUS)
return NULL;
else if (channel_type == NL80211_CHAN_HT40PLUS &&
chan->flags & IEEE80211_CHAN_NO_HT40PLUS)
return NULL;
ht_cap = &rdev->wiphy.bands[chan->band]->ht_cap;
if (channel_type != NL80211_CHAN_NO_HT) {
if (!ht_cap->ht_supported)
return NULL;
if (!(ht_cap->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) ||
ht_cap->cap & IEEE80211_HT_CAP_40MHZ_INTOLERANT)
return NULL;
}
return chan;
}
int cfg80211_set_freq(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev, int freq,
enum nl80211_channel_type channel_type)
{
struct ieee80211_channel *chan;
int result;
struct wireless_dev *mon_dev = NULL;
if (wdev && wdev->iftype == NL80211_IFTYPE_MONITOR) {
mon_dev = wdev;
wdev = NULL;
}
if (wdev) {
ASSERT_WDEV_LOCK(wdev);
if (!netif_running(wdev->netdev))
return -ENETDOWN;
}
if (!rdev->ops->set_channel)
return -EOPNOTSUPP;
chan = rdev_freq_to_chan(rdev, freq, channel_type);
if (!chan)
return -EINVAL;
result = rdev->ops->set_channel(&rdev->wiphy,
wdev ? wdev->netdev : NULL,
chan, channel_type);
if (result)
return result;
if (wdev)
wdev->channel = chan;
if (mon_dev)
mon_dev->channel = chan;
return 0;
}
Thanks for help!